| B(3) - phpMan
B(3perl) Perl Programmers Reference Guide B(3perl)
NAME
B - The Perl Compiler Backend
SYNOPSIS
use B;
DESCRIPTION
The "B" module supplies classes which allow a Perl program to delve into its own innards.
It is the module used to implement the "backends" of the Perl compiler. Usage of the
compiler does not require knowledge of this module: see the O module for the user-visible
part. The "B" module is of use to those who want to write new compiler backends. This
documentation assumes that the reader knows a fair amount about perl's internals including
such things as SVs, OPs and the internal symbol table and syntax tree of a program.
OVERVIEW
The "B" module contains a set of utility functions for querying the current state of the
Perl interpreter; typically these functions return objects from the B::SV and B::OP
classes, or their derived classes. These classes in turn define methods for querying the
resulting objects about their own internal state.
Utility Functions
The "B" module exports a variety of functions: some are simple utility functions, others
provide a Perl program with a way to get an initial "handle" on an internal object.
Functions Returning "B::SV", "B::AV", "B::HV", and "B::CV" objects
For descriptions of the class hierarchy of these objects and the methods that can be
called on them, see below, "OVERVIEW OF CLASSES" and "SV-RELATED CLASSES".
sv_undef
Returns the SV object corresponding to the C variable "sv_undef".
sv_yes
Returns the SV object corresponding to the C variable "sv_yes".
sv_no
Returns the SV object corresponding to the C variable "sv_no".
svref_2object(SVREF)
Takes a reference to any Perl value, and turns the referred-to value into an object in
the appropriate B::OP-derived or B::SV-derived class. Apart from functions such as
"main_root", this is the primary way to get an initial "handle" on an internal perl
data structure which can then be followed with the other access methods.
The returned object will only be valid as long as the underlying OPs and SVs continue
to exist. Do not attempt to use the object after the underlying structures are freed.
amagic_generation
Returns the SV object corresponding to the C variable "amagic_generation". As of Perl
5.18, this is just an alias to "PL_na", so its value is meaningless.
init_av
Returns the AV object (i.e. in class B::AV) representing INIT blocks.
check_av
Returns the AV object (i.e. in class B::AV) representing CHECK blocks.
unitcheck_av
Returns the AV object (i.e. in class B::AV) representing UNITCHECK blocks.
begin_av
Returns the AV object (i.e. in class B::AV) representing BEGIN blocks.
end_av
Returns the AV object (i.e. in class B::AV) representing END blocks.
comppadlist
Returns the PADLIST object (i.e. in class B::PADLIST) of the global comppadlist. In
Perl 5.16 and earlier it returns an AV object (class B::AV).
regex_padav
Only when perl was compiled with ithreads.
main_cv
Return the (faked) CV corresponding to the main part of the Perl program.
Functions for Examining the Symbol Table
walksymtable(SYMREF, METHOD, RECURSE, PREFIX)
Walk the symbol table starting at SYMREF and call METHOD on each symbol (a B::GV
object) visited. When the walk reaches package symbols (such as "Foo::") it invokes
RECURSE, passing in the symbol name, and only recurses into the package if that sub
returns true.
PREFIX is the name of the SYMREF you're walking.
For example:
# Walk CGI's symbol table calling print_subs on each symbol.
# Recurse only into CGI::Util::
walksymtable(\%CGI::, 'print_subs',
sub { $_[0] eq 'CGI::Util::' }, 'CGI::');
print_subs() is a B::GV method you have declared. Also see "B::GV Methods", below.
Functions Returning "B::OP" objects or for walking op trees
For descriptions of the class hierarchy of these objects and the methods that can be
called on them, see below, "OVERVIEW OF CLASSES" and "OP-RELATED CLASSES".
main_root
Returns the root op (i.e. an object in the appropriate B::OP-derived class) of the
main part of the Perl program.
main_start
Returns the starting op of the main part of the Perl program.
walkoptree(OP, METHOD)
Does a tree-walk of the syntax tree based at OP and calls METHOD on each op it visits.
Each node is visited before its children. If "walkoptree_debug" (see below) has been
called to turn debugging on then the method "walkoptree_debug" is called on each op
before METHOD is called.
walkoptree_debug(DEBUG)
Returns the current debugging flag for "walkoptree". If the optional DEBUG argument
is non-zero, it sets the debugging flag to that. See the description of "walkoptree"
above for what the debugging flag does.
Miscellaneous Utility Functions
ppname(OPNUM)
Return the PP function name (e.g. "pp_add") of op number OPNUM.
hash(STR)
Returns a string in the form "0x..." representing the value of the internal hash
function used by perl on string STR.
cast_I32(I)
Casts I to the internal I32 type used by that perl.
minus_c
Does the equivalent of the "-c" command-line option. Obviously, this is only useful
in a BEGIN block or else the flag is set too late.
cstring(STR)
Returns a double-quote-surrounded escaped version of STR which can be used as a string
in C source code.
perlstring(STR)
Returns a double-quote-surrounded escaped version of STR which can be used as a string
in Perl source code.
class(OBJ)
Returns the class of an object without the part of the classname preceding the first
"::". This is used to turn "B::UNOP" into "UNOP" for example.
threadsv_names
In a perl compiled for threads, this returns a list of the special per-thread threadsv
variables.
Exported utility variables
@optype
my $op_type = $optype[$op_type_num];
A simple mapping of the op type number to its type (like 'COP' or 'BINOP').
@specialsv_name
my $sv_name = $specialsv_name[$sv_index];
Certain SV types are considered 'special'. They're represented by B::SPECIAL and are
referred to by a number from the specialsv_list. This array maps that number back to
the name of the SV (like 'Nullsv' or '&PL_sv_undef').
OVERVIEW OF CLASSES
The C structures used by Perl's internals to hold SV and OP information (PVIV, AV, HV,
..., OP, SVOP, UNOP, ...) are modelled on a class hierarchy and the "B" module gives
access to them via a true object hierarchy. Structure fields which point to other objects
(whether types of SV or types of OP) are represented by the "B" module as Perl objects of
the appropriate class.
The bulk of the "B" module is the methods for accessing fields of these structures.
Note that all access is read-only. You cannot modify the internals by using this module.
Also, note that the B::OP and B::SV objects created by this module are only valid for as
long as the underlying objects exist; their creation doesn't increase the reference counts
of the underlying objects. Trying to access the fields of a freed object will give
incomprehensible results, or worse.
SV-RELATED CLASSES
B::IV, B::NV, B::RV, B::PV, B::PVIV, B::PVNV, B::PVMG, B::BM (5.9.5 and earlier), B::PVLV,
B::AV, B::HV, B::CV, B::GV, B::FM, B::IO. These classes correspond in the obvious way to
the underlying C structures of similar names. The inheritance hierarchy mimics the
underlying C "inheritance". For the 5.10.x branch, (ie 5.10.0, 5.10.1 etc) this is:
B::SV
|
+------------+------------+------------+
| | | |
B::PV B::IV B::NV B::RV
\ / /
\ / /
B::PVIV /
\ /
\ /
\ /
B::PVNV
|
|
B::PVMG
|
+-----+-----+-----+-----+
| | | | |
B::AV B::GV B::HV B::CV B::IO
| |
| |
B::PVLV B::FM
For 5.9.0 and earlier, PVLV is a direct subclass of PVMG, and BM is still present as a
distinct type, so the base of this diagram is
|
|
B::PVMG
|
+------+-----+-----+-----+-----+-----+
| | | | | | |
B::PVLV B::BM B::AV B::GV B::HV B::CV B::IO
|
|
B::FM
For 5.11.0 and later, B::RV is abolished, and IVs can be used to store references, and a
new type B::REGEXP is introduced, giving this structure:
B::SV
|
+------------+------------+
| | |
B::PV B::IV B::NV
\ / /
\ / /
B::PVIV /
\ /
\ /
\ /
B::PVNV
|
|
B::PVMG
|
+-------+-------+---+---+-------+-------+
| | | | | |
B::AV B::GV B::HV B::CV B::IO B::REGEXP
| |
| |
B::PVLV B::FM
Access methods correspond to the underlying C macros for field access, usually with the
leading "class indication" prefix removed (Sv, Av, Hv, ...). The leading prefix is only
left in cases where its removal would cause a clash in method name. For example,
"GvREFCNT" stays as-is since its abbreviation would clash with the "superclass" method
"REFCNT" (corresponding to the C function "SvREFCNT").
B::SV Methods
REFCNT
FLAGS
object_2svref
Returns a reference to the regular scalar corresponding to this B::SV object. In
other words, this method is the inverse operation to the svref_2object() subroutine.
This scalar and other data it points at should be considered read-only: modifying them
is neither safe nor guaranteed to have a sensible effect.
B::IV Methods
IV Returns the value of the IV, interpreted as a signed integer. This will be misleading
if "FLAGS & SVf_IVisUV". Perhaps you want the "int_value" method instead?
IVX
UVX
int_value
This method returns the value of the IV as an integer. It differs from "IV" in that
it returns the correct value regardless of whether it's stored signed or unsigned.
needs64bits
packiv
B::NV Methods
NV
NVX
B::RV Methods
RV
B::PV Methods
PV This method is the one you usually want. It constructs a string using the length and
offset information in the struct: for ordinary scalars it will return the string that
you'd see from Perl, even if it contains null characters.
RV Same as B::RV::RV, except that it will die() if the PV isn't a reference.
PVX This method is less often useful. It assumes that the string stored in the struct is
null-terminated, and disregards the length information.
It is the appropriate method to use if you need to get the name of a lexical variable
from a padname array. Lexical variable names are always stored with a null
terminator, and the length field (CUR) is overloaded for other purposes and can't be
relied on here.
CUR This method returns the internal length field, which consists of the number of
internal bytes, not necessarily the number of logical characters.
LEN This method returns the number of bytes allocated (via malloc) for storing the string.
This is 0 if the scalar does not "own" the string.
B::PVMG Methods
MAGIC
SvSTASH
B::MAGIC Methods
MOREMAGIC
precomp
Only valid on r-magic, returns the string that generated the regexp.
PRIVATE
TYPE
FLAGS
OBJ Will die() if called on r-magic.
PTR
REGEX
Only valid on r-magic, returns the integer value of the REGEX stored in the MAGIC.
B::PVLV Methods
TARGOFF
TARGLEN
TYPE
TARG
B::BM Methods
USEFUL
PREVIOUS
RARE
TABLE
B::GV Methods
is_empty
This method returns TRUE if the GP field of the GV is NULL.
NAME
SAFENAME
This method returns the name of the glob, but if the first character of the name is a
control character, then it converts it to ^X first, so that *^G would return "^G"
rather than "\cG".
It's useful if you want to print out the name of a variable. If you restrict yourself
to globs which exist at compile-time then the result ought to be unambiguous, because
code like "${"^G"} = 1" is compiled as two ops - a constant string and a dereference
(rv2gv) - so that the glob is created at runtime.
If you're working with globs at runtime, and need to disambiguate *^G from *{"^G"},
then you should use the raw NAME method.
STASH
SV
IO
FORM
AV
HV
EGV
CV
CVGEN
LINE
FILE
FILEGV
GvREFCNT
FLAGS
B::IO Methods
B::IO objects derive from IO objects and you will get more information from the IO object
itself.
For example:
$gvio = B::svref_2object(\*main::stdin)->IO;
$IO = $gvio->object_2svref();
$fd = $IO->fileno();
LINES
PAGE
PAGE_LEN
LINES_LEFT
TOP_NAME
TOP_GV
FMT_NAME
FMT_GV
BOTTOM_NAME
BOTTOM_GV
SUBPROCESS
IoTYPE
A character symbolizing the type of IO Handle.
- STDIN/OUT
I STDIN/OUT/ERR
< read-only
> write-only
a append
+ read and write
s socket
| pipe
I IMPLICIT
# NUMERIC
space closed handle
\0 closed internal handle
IoFLAGS
IsSTD
Takes one argument ( 'stdin' | 'stdout' | 'stderr' ) and returns true if the IoIFP of
the object is equal to the handle whose name was passed as argument; i.e.,
$io->IsSTD('stderr') is true if IoIFP($io) == PerlIO_stderr().
B::AV Methods
FILL
MAX
ARRAY
ARRAYelt
Like "ARRAY", but takes an index as an argument to get only one element, rather than a
list of all of them.
OFF This method is deprecated if running under Perl 5.8, and is no longer present if
running under Perl 5.9
AvFLAGS
This method returns the AV specific flags. In Perl 5.9 these are now stored in with
the main SV flags, so this method is no longer present.
B::CV Methods
STASH
START
ROOT
GV
FILE
DEPTH
PADLIST
Returns a B::PADLIST object under Perl 5.18 or higher, or a B::AV in earlier versions.
OUTSIDE
OUTSIDE_SEQ
XSUB
XSUBANY
For constant subroutines, returns the constant SV returned by the subroutine.
CvFLAGS
const_sv
NAME_HEK
Returns the name of a lexical sub, otherwise "undef".
B::HV Methods
FILL
MAX
KEYS
RITER
NAME
ARRAY
PMROOT
This method is not present if running under Perl 5.9, as the PMROOT information is no
longer stored directly in the hash.
OP-RELATED CLASSES
"B::OP", "B::UNOP", "B::BINOP", "B::LOGOP", "B::LISTOP", "B::PMOP", "B::SVOP", "B::PADOP",
"B::PVOP", "B::LOOP", "B::COP".
These classes correspond in the obvious way to the underlying C structures of similar
names. The inheritance hierarchy mimics the underlying C "inheritance":
B::OP
|
+---------------+--------+--------+-------+
| | | | |
B::UNOP B::SVOP B::PADOP B::COP B::PVOP
,' `-.
/ `--.
B::BINOP B::LOGOP
|
|
B::LISTOP
,' `.
/ \
B::LOOP B::PMOP
Access methods correspond to the underlying C structure field names, with the leading
"class indication" prefix ("op_") removed.
B::OP Methods
These methods get the values of similarly named fields within the OP data structure. See
top of "op.h" for more info.
next
sibling
name
This returns the op name as a string (e.g. "add", "rv2av").
ppaddr
This returns the function name as a string (e.g. "PL_ppaddr[OP_ADD]",
"PL_ppaddr[OP_RV2AV]").
desc
This returns the op description from the global C PL_op_desc array (e.g. "addition"
"array deref").
targ
type
opt
flags
private
spare
B::UNOP METHOD
first
B::BINOP METHOD
last
B::LOGOP METHOD
other
B::LISTOP METHOD
children
B::PMOP Methods
pmreplroot
pmreplstart
pmnext
Only up to Perl 5.9.4
pmflags
extflags
Since Perl 5.9.5
precomp
pmoffset
Only when perl was compiled with ithreads.
code_list
Since perl 5.17.1
B::SVOP METHOD
sv
gv
B::PADOP METHOD
padix
B::PVOP METHOD
pv
B::LOOP Methods
redoop
nextop
lastop
B::COP Methods
label
stash
stashpv
stashoff (threaded only)
file
cop_seq
arybase
line
warnings
io
hints
hints_hash
OTHER CLASSES
Perl 5.18 introduces a new class, B::PADLIST, returned by B::CV's "PADLIST" method.
B::PADLIST Methods
MAX
ARRAY
A list of pads. The first one contains the names. These are currently B::AV objects,
but that is likely to change in future versions.
ARRAYelt
Like "ARRAY", but takes an index as an argument to get only one element, rather than a
list of all of them.
REFCNT
$B::overlay
Although the optree is read-only, there is an overlay facility that allows you to override
what values the various B::*OP methods return for a particular op. $B::overlay should be
set to reference a two-deep hash: indexed by OP address, then method name. Whenever a an
op method is called, the value in the hash is returned if it exists. This facility is used
by B::Deparse to "undo" some optimisations. For example:
local $B::overlay = {};
...
if ($op->name eq "foo") {
$B::overlay->{$$op} = {
name => 'bar',
next => $op->next->next,
};
}
...
$op->name # returns "bar"
$op->next # returns the next op but one
AUTHOR
Malcolm Beattie, "mbeattie AT sable.uk"
perl v5.20.2 2014-12-27 B(3perl)
|