| |
HTML::Mason::Devel(3pm) - phpMan
HTML::Mason::Devel(3pm) User Contributed Perl Documentation HTML::Mason::Devel(3pm)
NAME
HTML::Mason::Devel - Mason Developer's Manual
VERSION
version 1.54
DESCRIPTION
This manual is written for content developers who know HTML and at least a little Perl.
The goal is to write, run, and debug Mason components.
If you are the webmaster (or otherwise responsible for the Mason installation), you should
also read the administrator's manual. There you will find information about site
configuration, performance tuning, component caching, and so on.
If you are a developer just interested in knowing more about Mason's capabilities and
implementation, then the administrator's manual is for you too.
We strongly suggest that you have a working Mason to play with as you work through these
examples. Other component examples can be found in the "samples/" directory.
While Mason can be used for tasks besides implementing a dynamic web site, that is what
most people want to do with Mason, and is thus the focus of this manual.
If you are planning to use Mason outside of the web, this manual will still be useful, of
course. Also make sure to read the running outside of mod_perl section of the
administrator's manual.
HOW TO USE THIS MANUAL
If you are just learning Mason and want to get started quickly, we recommend the following
sections:
o What Are Components?
o In-Line Perl Sections
o Calling Components
o Top-Level Components
o Passing Parameters
o Initialization and Cleanup (mainly "<%init>")
o Web-Specific Features
o Common Traps
WHAT ARE COMPONENTS?
The component - a mix of Perl and HTML - is Mason's basic building block and computational
unit. Under Mason, web pages are formed by combining the output from multiple components.
An article page for a news publication, for example, might call separate components for
the company masthead, ad banner, left table of contents, and article body. Consider this
layout sketch:
+---------+------------------+
|Masthead | Banner Ad |
+---------+------------------+
| | |
|+-------+|Text of Article ..|
|| || |
||Related||Text of Article ..|
||Stories|| |
|| ||Text of Article ..|
|+-------+| |
| +------------------+
| | Footer |
+---------+------------------+
The top level component decides the overall page layout, perhaps with HTML tables.
Individual cells are then filled by the output of subordinate components, one for the
Masthead, one for the Footer, etc. In practice pages are built up from as few as one, to
as many as twenty or more components.
This component approach reaps many benefits in a web environment. The first benefit is
consistency: by embedding standard design elements in components, you ensure a consistent
look and make it possible to update the entire site with just a few edits. The second
benefit is concurrency: in a multi-person environment, one person can edit the masthead
while another edits the table of contents. A last benefit is reuseability: a component
produced for one site might be useful on another. You can develop a library of generally
useful components to employ on your sites and to share with others.
Most components emit chunks of HTML. "Top level" components, invoked from a URL, represent
an entire web page. Other, subordinate components emit smaller bits of HTML destined for
inclusion in top level components.
Components receive form and query data from HTTP requests. When called from another
component, they can accept arbitrary parameter lists just like a subroutine, and
optionally return values. This enables a type of component that does not print any HTML,
but simply serves as a function, computing and returning a result.
Mason actually compiles components down to Perl subroutines, so you can debug and profile
component-based web pages with standard Perl tools that understand the subroutine concept,
e.g. you can use the Perl debugger to step through components, and Devel::DProf to profile
their performance.
IN-LINE PERL SECTIONS
Here is a simple component example:
<%perl>
my $noun = 'World';
my @time = localtime;
</%perl>
Hello <% $noun %>,
% if ( $time[2] < 12 ) {
good morning.
% } else {
good afternoon.
% }
After 12 pm, the output of this component is:
Hello World, good afternoon.
This short example demonstrates the three primary "in-line" Perl sections. In-line
sections are generally embedded within HTML and execute in the order they appear. Other
sections ("<%init>", "<%args>", etc.) are tied to component events like initialization,
cleanup, and argument definition.
The parsing rules for these Perl sections are as follows:
1. Blocks of the form <% xxx %> are replaced with the result of evaluating xxx as a
single Perl expression. These are often used for variable replacement. such as
'Hello, <% $name %>!'.
2. Lines beginning with a '%' character are treated as Perl.
3. Multiline blocks of Perl code can be inserted with the "<%perl>" .. "</%perl>" tag.
The enclosed text is executed as Perl and the return value, if any, is discarded.
The "<%perl>" tag, like all block tags in Mason, is case-insensitive. It may appear
anywhere in the text, and may span any number of lines.
Examples and Recommended Usage
% lines
Most useful for conditional and loop structures - if, while, foreach, , etc. - as well as
side-effect commands like assignments. To improve readability, always put a space after
the '%'. Examples:
o Conditional code
% my $ua = $r->header_in('User-Agent');
% if ($ua =~ /msie/i) {
Welcome, Internet Explorer users
...
% } elsif ($ua =~ /mozilla/i) {
Welcome, Netscape users
...
% }
o HTML list formed from array
<ul>
% foreach $item (@list) {
<li><% $item %></li>
% }
</ul>
o HTML list formed from hash
<ul>
% while (my ($key,$value) = each(%ENV)) {
<li>
<b><% $key %></b>: <% $value %>
</li>
% }
</ul>
o HTML table formed from list of hashes
<table>
% foreach my $h (@loh) {
<tr>
<td><% $h->{foo} %></td>
<td bgcolor=#ee0000><% $h->{bar} %></td>
<td><% $h->{baz} %></td>
</tr>
% }
</table>
<% xxx %>
Most useful for printing out variables, as well as more complex expressions. To improve
readability, always separate the tag and expression with spaces. Examples:
Dear <% $name %>: We will come to your house at <% $address %> in the
fair city of <% $city %> to deliver your $<% $amount %> dollar prize!
The answer is <% ($y+8) % 2 %>.
You are <% $age < 18 ? 'not' : '' %> permitted to enter this site.
<%perl> xxx </%perl>
Useful for Perl blocks of more than a few lines.
MASON OBJECTS
This section describes the various objects in the Mason universe. If you're just starting
out, all you need to worry about initially are the request objects.
Request Objects
Two global per-request objects are available to all components: $r and $m.
$r, the mod_perl request object, provides a Perl API to the current Apache request. It is
fully described in Apache.pod. Here is a sampling of methods useful to component
developers:
$r->uri # the HTTP request URI
$r->header_in(..) # get the named HTTP header line
$r->content_type # set or retrieve content-type
$r->header_out(..) # set or retrieve an outgoing header
$r->content # don't use this one! (see Tips and Traps)
$m, the Mason request object, provides an analogous API for Mason. Almost all Mason
features not activated by syntactic tags are accessed via $m methods. You'll be
introduced to these methods throughout this document as they are needed. For a
description of all methods see HTML::Mason::Request.
Because these are always set inside components, you should not ever define other variables
with the same name, or else your code may fail in strange and mysterious ways.
Component Objects
Mason provides an object API for components, allowing you to query a component's various
asociated files, arguments, etc. For a description of all methods see
HTML::Mason::Component. Typically you get a handle on a component object from request
methods like "$m->current_comp" and "$m->fetch_comp".
Note that for many basic applications all you'll want to do with components is call them,
for which no object method is needed. See next section.
System Objects
Many system objects share the work of serving requests in Mason: HTML::Mason::Lexer,
HTML::Mason::Compiler, HTML::Mason::Interp, HTML::Mason::Resolver, and
HTML::Mason::ApacheHandler are examples. The administrator creates these objects and
provides parameters that shape Mason's behavior. As a pure component developer you
shouldn't need to worry about or access these objects, but occasionally we'll mention a
relevant parameter.
CALLING COMPONENTS
Mason pages often are built not from a single component, but from multiple components that
call each other in a hierarchical fashion.
Components that output HTML
To call one component from another, use the <& &> tag:
<& comp_path, [name=>value, ...] &>
comp_path:
The component path. With a leading '/', the path is relative to the component root
(comp_root). Otherwise, it is relative to the location of the calling component.
name => value pairs:
Parameters are passed as one or more "name => value" pairs, e.g.
"player => 'M. Jordan'".
comp_path may be a literal string (quotes optional) or a Perl expression that evaluates to
a string. To eliminate the need for quotes in most cases, Mason employs some magic
parsing: If the first character is one of "[\w/_.]", comp_path is assumed to be a literal
string running up to the first comma or &>. Otherwise, comp_path is evaluated as an
expression.
Here are some examples:
# relative component paths
<& topimage &>
<& tools/searchbox &>
# absolute component path
<& /shared/masthead, color=>'salmon' &>
# this component path MUST have quotes because it contains a comma
<& "sugar,eggs", mix=>1 &>
# variable component path
<& $comp &>
# variable component and arguments
<& $comp, %args &>
# you can use arbitrary expression for component path, but it cannot
# begin with a letter or number; delimit with () to remedy this
<& (int(rand(2)) ? 'thiscomp' : 'thatcomp'), id=>123 &>
Several request methods also exist for calling components. "$m->comp" performs the
equivalent action to <& &>:
$m->comp('/shared/masthead', color=>'salmon');
"$m->scomp" is like the sprintf version of "$m->comp": it returns the component output,
allowing the caller to examine and modify it before printing:
my $masthead = $m->scomp('/shared/masthead', color=>'salmon');
$masthead =~ ...;
$m->print($masthead);
Component Calls with Content
Components can be used to filter part of the page's content using an extended component
syntax.
<&| /path/to/comp &> this is the content </&>
<&| comp, arg1 => 'hi' &> filters can take arguments </&>
<&| comp &> content can include <% "tags" %> of all kinds </&>
<&| comp1 &> nesting is also <&| comp2 &> OK </&> </&>
<&| SELF:method1 &> subcomponents can be filters </&>
The filtering component can be called in all the same ways a normal component is called,
with arguments and so forth. The only difference between a filtering component and a
normal component is that a filtering component is expected to fetch the content by calling
$m->content and do something with it.
The ending tag may optionally contain the name of the component, and Mason will verify
that it matches the name in the starting tag. This may be helpful when the tags are far
apart or nested. To avoid ambiguous situations, this is only allowed when the component
name is an unquoted literal (starting with "[\w/_.]"). For anything more complicated,
such as "<|& $var &>" or "<&| 'name' &>", the simple "</&>" form must be used.
<&| "outer" &>
<&| /inner/comp, arg=>'this' &>
<&| .mycomp &>
Yada yada yada
</& .mycomp >
</& /inner/comp >
</&>
Here is an example of a component used for localization. Its content is a series of
strings in different languages, and it selects the correct one based on a global $lang
variable, which could be setup in a site-level autohandler.
<&| /i18n/itext &>
<en>Hello, <% $name %> This is a string in English</en>
<de>Schoene Gruesse, <% $name %>, diese Worte sind auf Deutsch</de>
<pig>ellohay <% substr($name,2).substr($name,1,1).'ay' %>,
isthay isay igpay atinlay</pig>
</&>
Here is the /i18n/itext component:
<% $text %>
<%init>
# this assumes $lang is a global variable which has been set up earlier.
local $_ = $m->content;
my ($text) = m{<$lang>(.*?)</$lang>};
</%init>
You can explicitly check whether a component has passed content by checking the boolean
"$m->has_content". This allows you to write a component that will do different things
depending on whether it was passed content. However, before overloading a component in
this way, consider whether splitting the behavior into two distinct components would work
as well.
If a normal component which does not call "$m->content" is called with content, the
content will not be output.
If you wrap a filtering component call around the entire component, the result will be
functionally similar to a "<%filter>" section. See also Filtering.
Advanced Components Calls with Content
Internally "$m->content" is implemented with a closure containing the part of the
component which is the content. In English, that means that any mason tags and perl code
in the content are evaluated when "$m->content" is called, and "$m->content" returns the
text which would have been output by mason. Because the contents are evaluated at the
time that "$m->content" is called, one can write components which act as control
structures or which output their contents multiple times with different values for the
variables (can you say taglibs?).
The tricky part of using filter components as control structures is setting up variables
which can be accessed from both the filter component and the content, which is in the
component which calls the filter component. The content has access to all variables in
the surrounding component, but the filtering component does not. There are two ways to do
this: use global variables, or pass a reference to a lexical variable to the filter
component.
Here is a simple example using the second method:
% my $var;
<ol>
<&| list_items , list => \@items, var => \$var &>
<li> <% $var %></li>
</&>
</ol>
list_items component:
<%args>
@list
$var
</%args>
% foreach (@list) {
% $$var = $_; # $var is a reference
<% $m->content %>
% }
Using global variables can be somewhat simpler. Below is the same example, with $var
defined as a global variable. The site administrator must make sure that $var is included
in Mason's allow_globals parameter. Local-izing $var within the filter component will
allow the list_items component to be nested.
<ol>
<&| list_items, list => \@items &>
<li> <% $var %></li>
</&>
</ol>
list_items component:
<%args>
@list
</%args>
% foreach (@list) {
% local $var = $_;
<% $m->content %>
% }
Besides remembering to include $var in allow_globals, the developers should take care not
to use that variable is other places where it might conflict with usage by the filter
component. Local-izing $var will also provide some protection against using it in other
places.
An even simpler method is to use the $_ variable. It is already global, and is
automatically local-ized by the foreach statement:
<ol>
<&| list_items, list => \@items &>
<li> <% $_ %> </li>
</&>
</ol>
list_items component:
<%args>
@list
</%args>
% foreach (@list) {
<% $m->content %>
% }
Components that Return Values
So far you have seen components used solely to output HTML. However, components may also
be used to return values.
While we will demonstrate how this is done, we strongly encourage you to put code like
this in modules instead. There are several reasons why this is a good idea:
· You can re-use this code outside of Mason.
· It is easy to preload module code when running under mod_perl, which can lower memory
usage.
· Using Mason components as subroutines is slower than just using modules to do the same
thing.
· It's easier to regression test module code.
With that being said, there are times when you may want to write a component which returns
a value.
As an example, you might have a component "is_netscape" that analyzes the user agent to
determine whether it is a Netscape browser:
<%init>
my $ua = $r->header_in('User-Agent');
return ($ua =~ /Mozilla/i && $ua !~ /MSIE/i) ? 1 : 0;
</%init>
Because components are implemented underneath with Perl subroutines, they can return
values and even understand scalar/list context. e.g. The result of wantarray() inside a
component will reflect whether the component was called in scalar or list context.
The <& &> notation only calls a component for its side-effect, and discards its return
value, if any. To get at the return value of a component, use the "$m->comp" command:
% if ($m->comp('is_netscape')) {
Welcome, Netscape user!
% }
Mason adds a "return undef" to the bottom of each component to provide an empty default
return value. To return your own value from a component, you must use an explicit "return"
statement. You cannot rely on the usual Perl trick of letting return values "fall
through".
While it is possible for a component to generate output and return values, there is very
little reason for a component to do both. For example, it would not be very friendly for
"is_netscape" to output "hi Mom" while it was computing its value, thereby surprising the
"if" statement! Conversely, any value returned by an output generating component would
typically be discarded by the <& &> tag that invoked it.
Subrequests
You may sometimes want to have a component call go through all the steps that the initial
component call goes through, such as checking for autohandlers and dhandlers. To do this,
you need to execute a subrequest.
A subrequest is simply a Mason Request object and has all of the methods normally
associated with one.
To create a subrequest you simply use the "$m->make_subrequest" method. This method can
take any parameters belonging to HTML::Mason::Request, such as autoflush or out_method.
Once you have a new request object you simply call its "exec" method to execute it, which
takes exactly the same parameters as the "comp" method.
Since subrequests inherit their parent request's parameters, output from a component
called via a subrequest goes to the same desintation as output from components called
during the parent request. Of course, you can change this.
Here are some examples:
<%perl>
my $req = $m->make_subrequest( comp => '/some/comp', args => [ id => 172 ] );
$req->exec;
</%perl>
If you want to capture the subrequest's output in a scalar, you can simply pass an
out_method parameter to "$m->make_subrequest":
<%perl>
my $buffer;
my $req =
$m->make_subrequest
( comp => '/some/comp', args => [ id => 172 ], out_method => \$buffer );
$req->exec;
</%perl>
Now $buffer contains all the output from that call to /some/comp.
For convenience, Mason also provides an "$m->subexec" method. This method takes the same
arguments as "$m->comp" and internally calls "$m->make_subrequest" and then "exec" on the
created request, all in one fell swoop. This is useful in cases where you have no need to
override any of the parent request object's attributes.
By default, output from a subrequest appears inline in the calling component, at the point
where it is executed. If you wish to do something else, you will need to explicitly
override the subrequest's out_method parameter.
Mason Request objects are only designed to handle a single call to "exec". If you wish to
make multiple subrequests, you must create a new subrequest object for each one.
TOP-LEVEL COMPONENTS
The first component invoked for a page (the "top-level component") resides within the
DocumentRoot and is chosen based on the URL. For example:
http://www.foo.com/mktg/prods.html?id=372
Mason converts this URL to a filename, e.g. /usr/local/www/htdocs/mktg/prods.html. Mason
loads and executes that file as a component. In effect, Mason calls
$m->comp('/mktg/prods.html', id=>372)
This component might in turn call other components and execute some Perl code, or it might
contain nothing more than static HTML.
dhandlers
What happens when a user requests a component that doesn't exist? In this case Mason scans
backward through the URI, checking each directory for a component named dhandler ("default
handler"). If found, the dhandler is invoked and is expected to use "$m->dhandler_arg" as
the parameter to some access function, perhaps a database lookup or location in another
filesystem. In a sense, dhandlers are similar in spirit to Perl's AUTOLOAD feature; they
are the "component of last resort" when a URL points to a non-existent component.
Consider the following URL, in which newsfeeds/ exists but not the subdirectory LocalNews
nor the component Story1:
http://myserver/newsfeeds/LocalNews/Story1
In this case Mason constructs the following search path:
/newsfeeds/LocalNews/Story1 => no such thing
/newsfeeds/LocalNews/dhandler => no such thing
/newsfeeds/dhandler => found! (search ends)
/dhandler
The found dhandler would read "LocalNews/Story1" from "$m->dhandler_arg" and use it as a
retrieval key into a database of stories.
Here's how a simple /newsfeeds/dhandler might look:
<& header &>
<b><% $headline %></b><p>
<% $body %>
<& footer &>
<%init>
my $arg = $m->dhandler_arg; # get rest of path
my ($section, $story) = split("/", $arg); # split out pieces
my $sth = $DBH->prepare
(qq{SELECT headline,body FROM news
WHERE section = ? AND story = ?);
$sth->execute($section, $story);
my ($headline, $body) = $sth->fetchrow_array;
return 404 if !$headline; # return "not found" if no such story
</%init>
By default dhandlers do not get a chance to handle requests to a directory itself (e.g.
/newsfeeds). These are automatically deferred to Apache, which generates an index page or
a FORBIDDEN error. Often this is desirable, but if necessary the administrator can let in
directory requests as well; see the allowing directory requests section of the
administrator's manual.
A component or dhandler that does not want to handle a particular request may defer
control to the next dhandler by calling "$m->decline".
When using dhandlers under mod_perl, you may find that sometimes Apache will not set a
content type for a response. This usually happens when a dhandler handles a request for a
non-existent file or directory. You can add a "<Location>" or "<LocationMatch>" block
containing a "SetType" directive to your Apache config file, or you can just set the
content type dynamically by calling "$r->content_type".
The administrator can customize the file name used for dhandlers with the dhandler_name
parameter.
autohandlers
Autohandlers allow you to grab control and perform some action just before Mason calls the
top-level component. This might mean adding a standard header and footer, applying an
output filter, or setting up global variables.
Autohandlers are directory based. When Mason determines the top-level component, it
checks that directory and all parent directories for a component called autohandler. If
found, the autohandler is called first. After performing its actions, the autohandler
typically calls "$m->call_next" to transfer control to the original intended component.
"$m->call_next" works just like "$m->comp" except that the component path and arguments
are implicit. You can pass additional arguments to "$m->call_next"; these are merged with
the original arguments, taking precedence in case of conflict. This allows you, for
example, to override arguments passed in the URL.
Here is an autohandler that adds a common header and footer to each page underneath its
directory:
<html>
<head><title>McHuffy Incorporated</title></head>
<body style="background-color: pink">
% $m->call_next;
<hr />
Copyright 1999 McHuffy Inc.
</body>
</html>
Same idea, using components for the header/footer:
<& /shared/header &>
% $m->call_next;
<& /shared/footer &>
The next autohandler applies a filter to its pages, adding an absolute hostname to
relative image URLs:
% $m->call_next;
<%filter>
s{(<img[^>]+src=\")/} {$1http://images.mysite.com/}ig;
</%filter>
Most of the time autohandler can simply call "$m->call_next" without needing to know what
the next component is. However, should you need it, the component object is available from
"$m->fetch_next". This is useful for calling the component manually, e.g. if you want to
suppress some original arguments or if you want to use "$m->scomp" to store and process
the output.
If more than one autohandler applies to a page, each autohandler gets a chance to run.
The top-most autohandler runs first; each "$m->call_next" transfers control to the next
autohandler and finally to the originally called component. This allows you, for example,
to combine general site-wide templates and more specific section-based templates.
Autohandlers can be made even more powerful in conjunction with Mason's object-oriented
style features: methods, attributes, and inheritance. In the interest of space these are
discussed in a separate section, Object-Oriented Techniques.
The administrator can customize the file name used for autohandlers with the
autohandler_name parameter.
dhandlers vs. autohandlers
dhandlers and autohandlers both provide a way to exert control over a large set of URLs.
However, each specializes in a very different application. The key difference is that
dhandlers are invoked only when no appropriate component exists, while autohandlers are
invoked only in conjunction with a matching component.
As a rule of thumb: use an autohandler when you have a set of components to handle your
pages and you want to augment them with a template/filter. Use a dhandler when you want to
create a set of "virtual URLs" that don't correspond to any actual components, or to
provide default behavior for a directory.
dhandlers and autohandlers can even be used in the same directory. For example, you might
have a mix of real URLs and virtual URLs to which you would like to apply a common
template/filter.
PASSING PARAMETERS
This section describes Mason's facilities for passing parameters to components (either
from HTTP requests or component calls) and for accessing parameter values inside
components.
In Component Calls
Any Perl data type can be passed in a component call:
<& /sales/header, s => 'dog', l => [2, 3, 4], h => {a => 7, b => 8} &>
This command passes a scalar ($s), a list (@l), and a hash (%h). The list and hash must be
passed as references, but they will be automatically dereferenced in the called component.
In HTTP requests
Consider a CGI-style URL with a query string:
http://www.foo.com/mktg/prods.html?str=dog&lst=2&lst=3&lst=4
or an HTTP request with some POST content. Mason automatically parses the GET/POST values
and makes them available to the component as parameters.
Accessing Parameters
Component parameters, whether they come from GET/POST or another component, can be
accessed in two ways.
1. Declared named arguments: Components can define an "<%args>" section listing argument
names, types, and default values. For example:
<%args>
$a
@b # a comment
%c
# another comment
$d => 5
$e => $d*2
@f => ('foo', 'baz')
%g => (joe => 1, bob => 2)
</%args>
Here, $a, @b, and %c are required arguments; the component generates an error if the
caller leaves them unspecified. $d, $e, @f and %g are optional arguments; they are
assigned the specified default values if unspecified. All the arguments are available as
lexically scoped ("my") variables in the rest of the component.
Arguments are separated by one or more newlines. Comments may be used at the end of a line
or on their own line.
Default expressions are evaluated in top-to-bottom order, and one expression may reference
an earlier one (as $e references $d above).
Only valid Perl variable names may be used in "<%args>" sections. Parameters with non-
valid variable names cannot be pre-declared and must be fetched manually out of the %ARGS
hash (see below). One common example of undeclarable parameters are the
"button.x/button.y" parameters sent for a form submit.
2. %ARGS hash: This variable, always available, contains all of the parameters passed to
the component (whether or not they were declared). It is especially handy for dealing
with large numbers of parameters, dynamically named parameters, or parameters with non-
valid variable names. %ARGS can be used with or without an "<%args>" section, and its
contents are unrelated to what you have declared in "<%args>".
Here's how to pass all of a component's parameters to another component:
<& template, %ARGS &>
Parameter Passing Examples
The following examples illustrate the different ways to pass and receive parameters.
1. Passing a scalar id with value 5.
In a URL: /my/URL?id=5
In a component call: <& /my/comp, id => 5 &>
In the called component, if there is a declared argument named...
$id, then $id will equal 5
@id, then @id will equal (5)
%id, then an error occurs
In addition, $ARGS{id} will equal 5.
2. Passing a list colors with values red, blue, and green.
In a URL: /my/URL?colors=red&colors=blue&colors=green
In an component call: <& /my/comp, colors => ['red', 'blue', 'green'] &>
In the called component, if there is a declared argument named...
$colors, then $colors will equal ['red', 'blue', 'green']
@colors, then @colors will equal ('red', 'blue', 'green')
%colors, then an error occurs
In addition, $ARGS{colors} will equal ['red', 'blue', 'green'].
3. Passing a hash grades with pairs Alice => 92 and Bob => 87.
In a URL: /my/URL?grades=Alice&grades=92&grades=Bob&grades=87
In an component call: <& /my/comp, grades => {Alice => 92, Bob => 87} &>
In the called component, if there is a declared argument named...
@grades, then @grades will equal ('Alice', 92, 'Bob', 87)
%grades, then %grades will equal (Alice => 92, Bob => 87)
In addition, $grade and $ARGS{grades} will equal
['Alice',92,'Bob',87] in the URL case, or {Alice => 92, Bob => 87}
in the component call case. (The discrepancy exists because, in a
query string, there is no detectable difference between a list or
hash.)
Using @_ instead
If you don't like named parameters, you can pass a traditional list of ordered parameters:
<& /mktg/prods.html', 'dog', [2, 3, 4], {a => 7, b => 8} &>
and access them as usual through Perl's @_ array:
my ($scalar, $listref, $hashref) = @_;
In this case no "<%args>" section is necessary.
We generally recommend named parameters for the benefits of readability, syntax checking,
and default value automation. However using @_ may be convenient for very small
components, especially subcomponents created with "<%def>".
Before Mason 1.21, @_ contained copies of the caller's arguments. In Mason 1.21 and
beyond, this unnecessary copying was eliminated and @_ now contains aliases to the
caller's arguments, just as with regular Perl subroutines. For example, if a component
updates $_[0], the corresponding argument is updated (or an error occurs if it is not
updatable).
Most users won't notice this change because "<%args>" variables and the %ARGS hash always
contain copies of arguments.
See perlsub for more information on @_ aliasing.
INITIALIZATION AND CLEANUP
The following sections contain blocks of Perl to execute at specific times.
<%init>
This section contains initialization code that executes as soon as the component is
called. For example: checking that a user is logged in; selecting rows from a database
into a list; parsing the contents of a file into a data structure.
Technically an "<%init>" block is equivalent to a "<%perl>" block at the beginning of the
component. However, there is an aesthetic advantage of placing this block at the end of
the component rather than the beginning.
We've found that the most readable components (especially for non-programmers) contain
HTML in one continuous block at the top, with simple substitutions for dynamic elements
but no distracting blocks of Perl code. At the bottom an "<%init>" block sets up the
substitution variables. This organization allows non-programmers to work with the HTML
without getting distracted or discouraged by Perl code. For example:
<html>
<head><title><% $headline %></title></head>
<body>
<h2><% $headline %></h2>
<p>By <% $author %>, <% $date %></p>
<% $body %>
</body>
</html>
<%init>
# Fetch article from database
my $dbh = DBI::connect ...;
my $sth = $dbh->prepare("select * from articles where id = ?");
$sth->execute($article_id);
my ($headline, $date, $author, $body) = $sth->fetchrow_array;
# Massage the fields
$headline = uc($headline);
my ($year, $month, $day) = split('-', $date);
$date = "$month/$day";
</%init>
<%args>
$article_id
</%args>
<%cleanup>
This section contains cleanup code that executes just before the component exits. For
example: closing a database connection or closing a file handle.
A "<%cleanup>" block is equivalent to a "<%perl>" block at the end of the component. This
means it will NOT execute if the component explicitly returns, or if an abort or error
occurs in that component or one of its children. Because of this limitation, and because
Perl is usually so good about cleaning up at the end of a lexical scope (e.g. component),
"<%cleanup>" sections are rarely needed.
If you need code that is guaranteed to run when the component or request exits, consider
using a mod_perl cleanup handler, or creating a custom class with a DESTROY method.
<%once>
This code executes once when the component is loaded. Variables declared in this section
can be seen in all of a component's code and persist for the lifetime of the component.
This section is useful for declaring persistent component-scoped lexical variables
(especially objects that are expensive to create), declaring subroutines (both named and
anonymous), and initializing state.
This code does not run inside a request context. You cannot call components or access $m
or $r from this section. Also, do not attempt to "return()" from a "<%once>" section; the
current compiler cannot properly handle it.
Normally this code will execute individually from every HTTP child that uses the
component. However, if the component is preloaded, this code will only execute once in the
parent. Unless you have total control over what components will be preloaded, it is
safest to avoid initializing variables that can't survive a fork(), e.g. DBI handles. Use
code like this to initialize such variables in the "<%init>" section:
<%once>
my $dbh; # declare but don't assign
...
</%once>
<%init>
$dbh ||= DBI::connect ...
...
</%init>
In addition, using $m or $r in this section will not work in a preloaded component,
because neither of those variable exist when a component is preloaded.
<%shared>
As with "<%once>", lexical ("my") variables declared in this section can be seen in all
the rest of a component's code: the main body, subcomponents, and methods. However,
unlike "<%once>", the code runs once per request (whenever the component is used) and its
variables last only until the end of the request.
A "<%shared>" section is useful for initializing variables needed in, say, the main body
and one more subcomponents or methods. See Object-Oriented Techniques for an example of
usage.
It's important to realize that you do not have access to the %ARGS hash or variables
created via an "<%args>" block inside a shared section. However, you can access arguments
via $m->request_args.
Additionally, you cannot call a components' own methods or subcomponents from inside a
"<%shared>", though you can call other components.
Avoid using "<%shared>" for side-effect code that needs to run at a predictable time
during page generation. You may assume only that "<%shared>" runs just before the first
code that needs it and runs at most once per request.
In the current implementation, the scope sharing is done with closures, so variables will
only be shared if they are visible at compile-time in the other parts of the component.
In addition, you can't rely on the specific destruction time of the shared variables,
because they may not be destroyed until the first time the "<%shared>" section executes in
a future request. "<%init>" offers a more predictable execution and destruction time.
Currently any component with a "<%shared>" section incurs an extra performance penalty,
because Mason must recreate its anonymous subroutines the first time each new request uses
the component. The exact penalty varies between systems and for most applications will be
unnoticeable. However, one should avoid using "<%shared>" when patently unnecessary, e.g.
when an "<%init>" would work just as well.
Do not attempt to "return()" from a "<%shared>" section; the current compiler cannot
properly handle it.
EMBEDDED COMPONENTS
<%def name>
Each instance of this section creates a subcomponent embedded inside the current
component. Inside you may place anything that a regular component contains, with the
exception of "<%def>", "<%method>", "<%once>", and "<%shared>" tags.
The name consists of characters in the set "[\w._-]". To call a subcomponent simply use
its name in <& &> or "$m->comp". A subcomponent can only be seen from the surrounding
component.
If you define a subcomponent with the same name as a file-based component in the current
directory, the subcomponent takes precedence. You would need to use an absolute path to
call the file-based component. To avoid this situation and for general clarity, we
recommend that you pick a unique way to name all of your subcomponents that is unlikely to
interfere with file-based components. A commonly accepted practice is to start
subcomponent names with ".".
While inside a subcomponent, you may use absolute or relative paths to call file-based
components and also call any of your "sibling" subcomponents.
The lexical scope of a subcomponent is separate from the main component. However a
subcomponent can declare its own "<%args>" section and have relevant values passed in.
You can also use a "<%shared>" section to declare variables visible from both scopes.
In the following example, we create a ".link" subcomponent to produce a standardized
hyperlink:
<%def .link>
<a href="http://www.<;% $site %>.com"><% $label %></a>
<%args>
$site
$label=>ucfirst($site)
</%args>
</%def>
Visit these sites:
<ul>
<li><& .link, site=>'yahoo' &></li>
<li><& .link, site=>'cmp', label=>'CMP Media' &></li>
<li><& .link, site=>'excite' &></li>
</ul>
<%method name>
Each instance of this section creates a method embedded inside the current component.
Methods resemble subcomponents in terms of naming, contents, and scope. However, while
subcomponents can only be seen from the parent component, methods are meant to be called
from other components.
There are two ways to call a method. First, via a path of the form "comp:method":
<& /foo/bar:method1 &>
$m->comp('/foo/bar:method1');
Second, via the call_method component method:
my $comp = $m->fetch_comp('/foo/bar');
...
$comp->call_method('method1');
Methods are commonly used in conjunction with autohandlers to make templates more
flexible. See Object-Oriented Techniques for more information.
You cannot create a subcomponent and method with the same name. This is mostly to prevent
obfuscation and accidental errors.
FLAGS AND ATTRIBUTES
The "<%flags>" and "<%attr>" sections consist of key/value pairs, one per line, joined by
'=>'. In each pair, the key must be any valid Perl "bareword identifier" (made of
letters, numbers, and the underscore character), and the value may be any scalar value,
including references. An optional comment may follow each line.
<%flags>
Use this section to set official Mason flags that affect the current component's behavior.
Currently there is only one flag, "inherit", which specifies the component's parent in the
form of a relative or absolute component path. A component inherits methods and attributes
from its parent; see Object-Oriented Techniques for examples.
<%flags>
inherit=>'/site_handler'
</%flags>
<%attr>
Use this section to assign static key/value attributes that can be queried from other
components.
<%attr>
color => 'blue'
fonts => [qw(arial geneva helvetica)]
</%attr>
To query an attribute of a component, use the "attr" method:
my $color = $comp->attr('color')
where $comp is a component object.
Mason evaluates attribute values once when loading the component. This makes them faster
but less flexible than methods.
FILTERING
This section describes several ways to apply filtering functions over the results of the
current component. By separating out and hiding a filter that, say, changes HTML in a
complex way, we allow non-programmers to work in a cleaner HTML environment.
<%filter> section
The "<%filter>" section allows you to arbitrarily filter the output of the current
component. Upon entry to this code, $_ contains the component output, and you are expected
to modify it in place. The code has access to component arguments and can invoke
subroutines, call other components, etc.
This simple filter converts the component output to UPPERCASE:
<%filter>
tr/a-z/A-Z/
</%filter>
The following navigation bar uses a filter to "unlink" and highlight the item
corresponding to the current page:
<a href="/">Home</a> | <a href="/products/">Products</a> |
<a href="/bg.html">Background</a> | <a href="/finance/">Financials</a> |
<a href="/support/">Tech Support</a> | <a href="/contact.html">Contact Us</a>
<%filter>
my $uri = $r->uri;
s{<a href="$uri/?">(.*?)</a>} {<b>$1</b>}i;
</%filter>
This allows a designer to code such a navigation bar intuitively without "if" statements
surrounding each link! Note that the regular expression need not be very robust as long
as you have control over what will appear in the body.
A filter block does not have access to variables declared in a component's "<%init>"
section, though variables declared in the "<%args>", "<%once>" or "<%shared>" blocks are
usable in a filter.
It should be noted that a filter cannot rely on receiving all of a component's output at
once, and so may be called multiple times with different chunks of output. This can
happen if autoflush is on, or if a filter-containing component, or the components it
calls, call the "$m->flush_buffer()" method.
You should never call Perl's "return()" function inside a filter section, or you will not
see any output at all.
You can use Component Calls with Content if you want to filter specific parts of a
component rather than the entire component.
COMMENT MARKERS
There are several ways to place comments in components, i.e. arbitrary text that is
ignored by the parser.
<%doc>
Text in this section is treated as a comment and ignored. Most useful for a component's
main documentation. One can easily write a program to sift through a set of components
and pull out their "<%doc>" blocks to form a reference page.
<% # comment... %>
A "<% %>" tag is considered a comment if all of its lines are either whitespace, or begin
with a '#' optionally preceded by whitespace. For example,
<% # This is a single-line comment %>
<%
# This is a
# multi-line comment
%>
%# comment
Because a line beginning with "%" is treated as Perl, "%#" automatically works as a
comment. However we prefer the "<% # comment %>" form over "%#", because it stands out a
little more as a comment and because it is more flexible with regards to preceding
whitespace.
% if (0) { }
Anything between these two lines
% if (0) {
...
% }
will be skipped by Mason, including component calls. While we don't recomend this for
comments per se, it is a useful notation for "commenting out" code that you don't want to
run.
HTML/XML/... comments
HTML and other markup languages will have their own comment markers, for example "<!--
-->". Note two important differences with these comments versus the above comments:
· They will be sent to the client and appear in the source of the page.
· They do not block component calls and other code from running, so don't try to use
them to comment out code!
<!-- Oops, the code below will still run
<& /shared/expensive.mhtml &>
-->
OTHER SYNTAX
<%text>
Text in this section is printed as-is with all Mason syntax ignored. This is useful, for
example, when documenting Mason itself from a component:
<%text>
% This is an example of a Perl line.
<% This is an example of an expression block. %>
</%text>
This works for almost everything, but doesn't let you output "</%text>" itself! When all
else fails, use "$m->print":
% $m->print('The tags are <%text> and </%text>.');
Escaping expressions
Mason has facilities for escaping the output from "<% %>" tags, on either a site-wide or a
per-expression basis.
Any "<% %>" expression may be terminated by a '|' and one or more escape flags (plus
arbitrary whitespace), separated by commas:
<% $file_data |h %>
The current valid flags are:
· h
Escape HTML ('<' => '<', etc.) using "HTML::Entities::encode()". Before Perl 5.8.0
this module assumes that text is in the ISO-8859-1 character set; see the next section
for how to override this escaping. After 5.8.0, the encoding assumes that text is in
Unicode.
· u
Escape a URL query string (':' => '%3A', etc.) - all but [a-zA-Z0-9_.-]
· n
This is a special flag indicating that the default escape flags should not be used for
this substitution.
The administrator may specify a set of default escape flags via the default_escape_flags
parameter. For example, if the administrator sets default_escape_flags to "['h']", then
all <% %> expressions will automatically be HTML-escaped. In this case you would use the
"n" flag to turn off HTML-escaping for a specific expression:
<% $html_block |n %>
Multiple escapes can be specified as a comma-separated list:
<% $uri | u, n %>
The old pre-defined escapes, 'h', 'u', and 'n', can be used without commas, so that this
is legal:
<% $uri | un %>
However, this only works for these three escapes, and no others. If you are using user-
defined escapes as well, you must use a comma:
<% $uri | u, add_session %>
User-defined Escapes
Besides the default escapes mentioned above, it is possible for the user to define their
own escapes or to override the built-in 'h' and 'u' escapes.
This is done via the Interp object's escape_flags parameter or set_escape() method.
Escape names may be any number of characters as long as it matches the regex "/^[\w-]+$/".
The one exception is that you cannot override the 'n' flag.
Each escape flag is associated with a subroutine reference. The subroutine should expect
to receive a scalar reference, which should be manipulated in place. Any return value
from this subroutine is ignored.
Escapes can be defined at any time but using an escape that is not defined will cause an
error when executing that component.
A common use for this feature is to override the built-in HTML escaping, which will not
work with non-ISO-8559-1 encodings. If you are using such an encoding and want to switch
the 'h' flag to do escape just the minimal set of characters ("<", ">", "&", """), put
this in your Apache configuration:
PerlSetVar MasonEscapeFlags "h => \&HTML::Mason::Escapes::basic_html_escape"
Or, in a top-level autohandler:
$m->interp->set_escape( h => \&HTML::Mason::Escapes::basic_html_escape );
Or you could write your own escape function for a particular encoding:
$ah->interp->set_escape( h => \&my_html_escape );
And of course this can be used for all sorts of other things, like a naughty words filter
for the easily offended:
$interp->set_escape( 'no-naughty' => \&remove_naughty_words );
Manually applying escapes
You can manually apply one or more escapes to text using the Interp object's
"apply_escapes()" method. e.g.
$m->interp->apply_escapes( 'some html content', 'h' );
Backslash at end of line
A backslash (\) at the end of a line suppresses the newline. In HTML components, this is
mostly useful for fixed width areas like "<pre>" tags, since browsers ignore white space
for the most part. An example:
<pre>
foo
% if (1) {
bar
% }
baz
</pre>
outputs
foo
bar
baz
because of the newlines on lines 2 and 4. (Lines 3 and 5 do not generate a newline because
the entire line is taken by Perl.) To suppress the newlines:
<pre>
foo\
% if (1) {
bar\
% }
baz
</pre>
which prints
foobarbaz
DATA CACHING
Mason's data caching interface allows components to cache the results of computation for
improved performance. Anything may be cached, from a block of HTML to a complex data
structure.
Each component gets its own private, persistent data cache. Except under special
circumstances, one component does not access another component's cache. Each cached value
may be set to expire at a certain time.
Data caching is implemented on top of one of two external caching APIs: "Cache::Cache",
which is stable but has not changed in years, or "CHI", which has picked up where
"Cache::Cache" has left off and is actively maintained. You control which one Mason uses
with the data_cache_api parameter. "Cache::Cache" is the default for backward
compatibility reasons, but we recommend "CHI" for anyone doing serious caching. The APIs
are very similar for Mason users, so that most of the information below applies to both;
any differences are noted.
Basic Usage
The "$m->cache" method returns a cache object representing the cache for this component.
Here's the typical usage of "$m->cache":
my $result = $m->cache->get('key');
if (!defined($result)) {
... compute $result ...
$m->cache->set('key', $result);
}
"$m->cache->get" attempts to retrieve this component's cache value. If the value is
available it is placed in $result. If the value is not available, $result is computed and
stored in the cache by "$m->cache->set".
Multiple Keys/Values
A cache can store multiple key/value pairs. A value can be anything serializable by
"Storable", from a simple scalar to an arbitrary complex list or hash reference:
$m->cache->set(name => $string);
$m->cache->set(friends => \@list);
$m->cache->set(map => \%hash);
You can fetch all the keys in a cache with
my @idents = $m->cache->get_keys;
It should be noted that Mason reserves all keys beginning with "__mason" for its own use.
Expiration
You can pass an optional third argument to "$m->cache->set" indicating when the item
should expire:
$m->cache->set('name1', $string1, '5 min'); # Expire in 5 minutes
$m->cache->set('name2', $string2, '3h'); # Expire in 3 hours
To change the expiration time for a piece of data, call "set" again with the new
expiration. To expire an item immediately, use "$m->cache->remove".
You can also specify an expiration condition when you fetch the item, using the expire_if
option:
my $result = $m->cache->get('key',
expire_if=>sub { $_[0]->get_created_at < (stat($file))[9] });
expire_if takes an anonymous subroutine, which is called with the cache object as its only
parameter. If the subroutine returns a true value, the item is expired. In the example
above, we expire the item whenever a certain file changes.
Finally, you can expire a cache item from an external script; see Accessing a Cache
Externally below.
Avoiding Concurrent Recomputation
The code shown in "Basic Usage" above,
my $result = $m->cache->get('key');
if (!defined($result)) {
... compute $result ...
$m->cache->set('key', $result);
}
can suffer from a kind of race condition for caches that are accessed frequently and take
a long time to recompute.
Suppose that a particular cache value is accessed five times a second and takes three
seconds to recompute. When the cache expires, the first process comes in, sees that it is
expired, and starts to recompute the value. The second process comes in and does the same
thing. This sequence continues until the first process finishes and stores the new value.
On average, the value will be recomputed and written to the cache 15 times!
One solution is the busy_lock flag:
my $result = $m->cache->get('key', busy_lock=>'30 sec');
In this case, when the value cannot be retrieved, "get()" sets the expiration time of the
value 30 seconds in the future before returning "undef". This tells the first process to
compute the new value while causing subsequent processes to use the old value for 30
seconds.
Should the 30 seconds expire before the first process is done, a second process will start
computing the new value while setting the expiration time yet another 30 seconds in the
future, and so on.
The disadvantage of this solution is that multiple writes to the cache will be performed
for each "set()".
Another solution, available only if you are using "CHI", is "expires_variance" which will
create a variable time window during which expiration may occur. See the "CHI"
documentation for details.
Caching All Output
Occasionally you will need to cache the complete output of a component. For this purpose,
Mason offers the "$m->cache_self" method. This method causes Mason to check to see if
this component has already been run and its output cached. If this is the case, this
output is simply sent as output. Otherwise, the component run normally and its output and
return value cached.
It is typically used right at the top of an "<%init>" section:
<%init>
return if $m->cache_self(key => 'fookey', expires_in => '3 hours',
... <other cache options> ...);
... <rest of init> ...
</%init>
A full list of parameters and examples are available in the cache_self section of the
Request manual.
Cache Object
"$m->cache->get_object" returns a "Cache::Object" or "CHI::CacheObject" associated with a
particular key. You can use this to retrieve useful meta-data:
my $co = $m->cache->get_object('name1');
$co->get_created_at(); # when was object stored in cache
$co->get_expires_at(); # when does object expire
Choosing a Cache Subclass - with Cache::Cache
The "Cache::Cache" API is implemented by a variety of backend subclasses. For example,
"FileCache" implements the interface with a set of directories and files, "MemoryCache"
implements the interface in process memory, and "SharedMemoryCache" implements the
interface in shared memory.
By default "$m->cache" uses "FileCache", but you can override this with the cache_class
keyword. The value must be the name of a "Cache::Cache" subclass; the prefix "Cache::"
need not be included. For example:
my $result = $m->cache(cache_class => 'MemoryCache')->get('key');
$m->cache(cache_class => 'MemoryCache')->set(key => $result);
You can even specify different subclasses for different keys in the same component. Just
make sure the correct value is passed to all calls to "$m->cache"; Mason does not remember
which subclass you have used for a given component or key.
The administrator can set the default cache subclass used by all components with the
data_cache_defaults parameter.
Choosing a Cache Subclass - with CHI
The "CHI" API is implemented by a variety of drivers, for example "CHI::Driver::File",
"CHI::Driver::FastMmap", and "CHI::Driver::Memcached".
"CHI::Driver::File" is the default, but you can override this with the driver keyword. The
value must be the name of a "CHI::Driver" subclass; the prefix "CHI::Driver::" need not be
included. For example:
my $cache = $m->cache(driver => 'Memcached', servers => [ ... ]);
my $result = $cache->get('key');
$cache->set(key => $result);
You can even specify different subclasses for different keys in the same component. Just
make sure the correct value is passed to all calls to "$m->cache"; Mason does not remember
which subclass you have used for a given component or key.
The administrator can set the default cache subclass used by all components with the
data_cache_defaults parameter.
Accessing a Cache Externally
To access a component's cache from outside the component (e.g. in an external Perl
script), you'll need have the following information:
· the namespace associated with the component. For "Cache::Cache", the function
"HTML::Mason::Utils::data_cache_namespace", given a component id (usually just the
component path), returns the namespace. For "CHI", the component id/path itself is the
namespace.
· the cache_root, for file-based caches only. Defaults to the "cache" subdirectory under
the Mason data directory.
Given this information you can get a handle on the component's cache. For example, the
following code removes a cache item for component /foo/bar, assuming the data directory is
/usr/local/www/mason and you are using the default file backend:
use HTML::Mason::Utils qw(data_cache_namespace);
# With Cache::Cache
my $cache = new Cache::FileCache
( { namespace => data_cache_namespace("/foo/bar"),
cache_root => "/usr/local/www/mason/cache" } );
# With CHI
my $cache = CHI->new
( driver => 'File',
namespace => "/foo/bar",
cache_root => "/usr/local/www/mason/cache" );
# Remove one key
$cache->remove('key1');
# Remove all keys
$cache->clear;
Mason 1.0x Cache API
For users upgrading from 1.0x and earlier, any existing $m->cache code will be
incompatible with the new API. However, if you wish to continue using the 1.0x cache API
for a while, you (or your administrator) can set data_cache_api to '1.0'. All of the
$m->cache options with the exception of "tie_class" should be supported.
The "access_data_cache" function is no longer available; this will need to be converted to
use "Cache::Cache" directly, as described in the previous section.
WEB-SPECIFIC FEATURES
Sending HTTP Headers
Mason automatically sends HTTP headers via "$r->send_http_header" but it will not send
headers if they've already been sent manually.
To determine the exact header behavior on your system, you need to know whether your
server's default is to have autoflush on or off. Your administrator should have this
information. If your administrator doesn't know then it is probably off, the default.
With autoflush off the header situation is extremely simple: Mason waits until the very
end of the request to send headers. Any component can modify or augment the headers.
With autoflush on the header situation is more complex. Mason will send headers just
before sending the first output. This means that if you want to affect the headers with
autoflush on, you must do so before any component sends any output. Generally this takes
place in an "<%init>" section.
For example, the following top-level component calls another component to see whether the
user has a cookie; if not, it inserts a new cookie into the header.
<%init>
my $cookie = $m->comp('/shared/get_user_cookie');
if (!$cookie) {
$cookie = new CGI::Cookie (...);
$r->header_out('Set-cookie' => $cookie);
}
...
</%init>
With autoflush off this code will always work. Turn autoflush on and this code will only
work as long as /shared/get_user_cookie doesn't output anything (given its functional
nature, it shouldn't).
The administrator can turn off automatic header sending via the auto_send_headers
parameter. You can also turn it off on individual pages with
$m->auto_send_headers(0);
Returning HTTP Status
The value returned from the top-most component becomes the status code of the request. If
no value is explicitly returned, it defaults to OK \fIs0(0).
Simply returning an error status (such as 404) from the top-most component has two
problems in practice. First, the decision to return an error status often resides further
down in the component stack. Second, you may have generated some content by the time this
decision is made. (Both of these are more likely to be true when using autohandlers.)
Thus the safer way to generate an error status is
$m->clear_buffer;
$m->abort($status);
"$m->abort" bypasses the component stack and ensures that $status is returned from the
top-most component. It works by throwing an exception. If you wrapped this code (directly
or indirectly) in an eval, you must take care to rethrow the exception, or the status will
not make it out:
eval { $m->comp('...') };
if (my $err = $@) {
if ($m->aborted) {
die $err;
} else {
# deal with non-abort exceptions
}
}
Filters and $m->abort
A filter section will still be called after a component aborts with "$m->abort". You can
always check "$m->aborted" in your "<%filter>" block if you don't want to run the filter
after an abort.
<%filter>
unless ( $m->aborted ) {
$_ .= ' filter stuff';
}
</%filter>
External Redirects
Because it is so commonly needed, Mason 1.1x and on provides an external redirect method:
$m->redirect($url); # Redirects with 302 status
This method uses the clear_buffer/abort technique mentioned above, so the same warnings
apply regarding evals.
Also, if you generate any output after calling "$m->redirect", then this output will be
sent, and will break the redirect. For example:
% eval { $m->comp('redirect', ...) };
% die $@ if $@;
The blank line between the two Perl lines is new output generated after the redirect.
Either remove it or call "$m->clear_buffer" immediately before calling "die()".
Internal Redirects
There are two ways to perform redirects that are invisible to the client.
First, you can use a Mason subrequest (see "Subrequests"). This only works if you are
redirecting to another Mason page.
Second, you can use Apache's internal_redirect method, which works whether or not the new
URL will be handled by Mason. Use it this way:
$r->internal_redirect($url);
$m->auto_send_headers(0);
$m->clear_buffer;
$m->abort;
The last three lines prevent the original request from accidentally generating extra
headers or content.
USING THE PERL DEBUGGER
You can use the perl debugger in conjunction with a live mod_perl/Mason server with the
help of Apache::DB, available from CPAN. Refer to the Apache::DB documentation for
details.
The only tricky thing about debugging Mason pages is that components are implemented by
anonymous subroutines, which are not easily breakpoint'able. To remedy this, Mason calls
the dummy subroutine "debug_hook" at the beginning of each component. You can breakpoint
this subroutine like so:
b HTML::Mason::Request::debug_hook
debug_hook is called with two parameters: the current Request object and the full
component path. Thus you can breakpoint specific components using a conditional on $_[1]:
b HTML::Mason::Request::debug_hook $_[1] =~ /component name/
You can avoid all that typing by adding the following to your ~/.perldb file:
# Perl debugger aliases for Mason
$DB::alias{mb} = 's/^mb\b/b HTML::Mason::Request::debug_hook/';
which reduces the previous examples to just:
mb
mb $_[1] =~ /component name/
Mason normally inserts '#line' directives into compiled components so that line numbers
are reported relative to the source file. Depending on your task, this can be a help or a
hindrance when using the debugger. The administrator can turn off '#line' directives with
the use_source_line_numbers parameter.
LOGGING
Mason uses "Log::Any" to log various events, such as the start and end of each request and
each component call. You can also log to "Log::Any" from a component with the "$m->log"
method. e.g.
$m->log->error("Something bad happened!");
$m->log->debugf("Arguments for '%s' were '%s'", $func, \%args)
if $m->log->is_debug;
See "Log::Any::Adapter" for how to direct these logs to an output of your choice.
OBJECT-ORIENTED TECHNIQUES
Earlier you learned how to assign a common template to an entire hierarchy of pages using
autohandlers. The basic template looks like:
header HTML
% $m->call_next;
footer HTML
However, sometimes you'll want a more flexible template that adjusts to the requested
page. You might want to allow each page or subsection to specify a title, background
color, or logo image while leaving the rest of the template intact. You might want some
pages or subsections to use a different template, or to ignore templates entirely.
These issues can be addressed with the object-oriented style primitives introduced in
Mason 0.85.
Note: we use the term object-oriented loosely. Mason borrows concepts like inheritance,
methods, and attributes from object methodology but implements them in a shallow way to
solve a particular set of problems. Future redesigns may incorporate a deeper object
architecture if the current prototype proves successful.
Determining inheritance
Every component may have a single parent. The default parent is a component named
"autohandler" in the closest parent directory. This rule applies to autohandlers too: an
autohandler may not have itself as a parent but may have an autohandler further up the
tree as its parent.
You can use the "inherit" flag to override a component's parent:
<%flags>
inherit => '/foo/bar'
</%flags>
If you specify undef as the parent, then the component inherits from no one. This is how
to suppress templates.
Currently there is no way to specify a parent dynamically at run-time, or to specify
multiple parents.
Content wrapping
At page execution time, Mason builds a chain of components from the called component, its
parent, its parent's parent, and so on. Execution begins with the top-most component;
calling "$m->call_next" passes control to the next component in the chain. This is the
familiar autohandler "wrapping" behavior, generalized for any number of arbitrarily named
templates.
Accessing methods and attributes
A template can access methods and/or attributes of the requested page. First, use
"$m->request_comp" to get a handle on the appropriate component:
my $self = $m->request_comp;
$self now refers to the component corresponding to the requested page (the component at
the end of the chain).
To access a method for the page, use "call_method":
$self->call_method('header');
This looks for a method named 'header' in the page component. If no such method exists,
the chain of parents is searched upwards, until ultimately a "method not found" error
occurs. Use 'method_exists' to avoid this error for questionable method calls:
if ($self->method_exists('header')) { ...
The component returned by the "$m->request_comp" method never changes during request
execution. In contrast, the component returned by "$m->base_comp" may change several
times during request execution.
When execution starts, the base component is the same as the requested component.
Whenever a component call is executed, the base component may become the component that
was called. The base component will change for all component calls except in the
following cases:
· A component is called via its component object rather than its path, for example:
<& $m->fetch_comp('/some/comp'), foo => 1 &>
· A subcomponent (defined with "<%def>") is called.
· A method is called via the use of "SELF:", "PARENT:", or "REQUEST:". These are
covered in more detail below.
In all other cases, the base component is the called component or the called component's
owner component if that called component is a method.
As hinted at above, Mason provides a shortcut syntax for method calls.
If a component call path starts with "SELF:", then Mason will start looking for the method
(the portion of the call after "SELF:"), in the base component.
<& SELF:header &>
$m->comp('SELF:header')
If the call path starts with "PARENT:", then Mason will start looking in the current
component's parent for the named method.
<& PARENT:header &>
$m->comp('PARENT:header')
In the context of a component path, PARENT is shorthand for "$m->current_comp->parent".
If the call path begins with "REQUEST:", then Mason looks for the method in the requested
component. REQUEST is shorthand for "$m->request_comp".
The rules for attributes are similar. To access an attribute for the page, use "attr":
my $color = $self->attr('color')
This looks for an attribute named 'color' in the $self component. If no such attribute
exists, the chain of parents is searched upwards, until ultimately an "attribute not
found" error occurs. Use "attr_exists" or "attr_if_exist" to avoid this error for
questionable attributes:
if ($self->attr_exists('color')) { ...
my $color = $self->attr_if_exists('color'); # if it doesn't exist $color is undef
Sharing data
A component's main body and its methods occupy separate lexical scopes. Variables
declared, say, in the "<%init>" section of the main component cannot be seen from methods.
To share variables, declare them either in the "<%once>" or "<%shared>" section. Both
sections have an all-inclusive scope. The "<%once>" section runs once when the component
loads; its variables are persistent for the lifetime of the component. The "<%shared>"
section runs once per request (when needed), just before any code in the component runs;
its variables last only til the end of the request.
In the following example, various sections of code require information about the logged-in
user. We use a "<%shared>" section to fetch these in a single request.
<%attr>
title=>sub { "Account for $full_name" }
</%attr>
<%method lefttoc>
<i><% $full_name %></i>
(<a href="logout.html">Log out</a>)<br />
...
</%method>
Welcome, <% $fname %>. Here are your options:
<%shared>
my $dbh = DBI::connect ...;
my $user = $r->connection->user;
my $sth = $dbh->prepare("select lname,fname, from users where user_id = ?");
$sth->execute($user);
my ($lname, $fname) = $sth->fetchrow_array;
my $full_name = "$first $last";
</%shared>
"<%shared>" presents a good alternative to "<%init>" when data is needed across multiple
scopes. Outside these situations, "<%init>" is preferred for its slightly greater speed
and predictable execution model.
Example
Let's say we have three components:
/autohandler
/products/autohandler
/products/index.html
and that a request comes in for /products/index.html.
/autohandler contains a general template for the site, referring to a number of standard
methods and attributes for each page:
<head>
<title><& SELF:title &></title>
</head>
<body style="<% $self->attr('body_style') %>">
<& SELF:header &>
<div id="main">
% $m->call_next;
</div>
<& SELF:footer &>
</body>
<%init>
my $self = $m->base_comp;
...
</%init>
<%attr>
body_style => 'standard'
</%attr>
<%method title>
McGuffey Inc.
</%method>
<%method header>
<h2><& SELF:title &></h2>
</%method>
<%method footer>
</%method>
Notice how we provide defaults for each method and attribute, even if blank.
/products/autohandler overrides some attributes and methods for the /products section of
the site.
<%attr>
body_style => 'plain'
</%attr>
<%method title>
McGuffey Inc.: Products
</%method>
% $m->call_next;
Note that this component, though it only defines attributes and methods, must call
"$m->call_next" if it wants the rest of the chain to run.
/products/index.html might override a few attributes, but mainly provides a primary
section for the body.
COMMON TRAPS
Do not call $r->content or "new CGI"
Mason calls "$r->content" itself to read request input, emptying the input buffer and
leaving a trap for the unwary: subsequent calls to "$r->content" hang the server. This
is a mod_perl "feature" that may be fixed in an upcoming release.
For the same reason you should not create a CGI object like
my $query = new CGI;
when handling a POST; the CGI module will try to reread request input and hang.
Instead, create an empty object:
my $query = new CGI ("");
such an object can still be used for all of CGI's useful HTML output functions. Or, if
you really want to use CGI's input functions, initialize the object from %ARGS:
my $query = new CGI (\%ARGS);
MASON AND SOURCE FILTERS
Modules which work as source filters, such as "Switch.pm", will only work when you are
using object files. This is because of how source filters are implemented, and cannot be
changed by the Mason authors.
SEE ALSO
Mason
AUTHORS
· Jonathan Swartz <swartz AT pobox.com>
· Dave Rolsky <autarch AT urth.org>
· Ken Williams <ken AT mathforum.org>
COPYRIGHT AND LICENSE
This software is copyright (c) 2012 by Jonathan Swartz.
This is free software; you can redistribute it and/or modify it under the same terms as
the Perl 5 programming language system itself.
perl v5.20.1 2014-01-19 HTML::Mason::Devel(3pm)
|
