:: RootR ::  Hosting Order Map Login   Secure Inter-Network Operations  
 
WITH(7) - phpMan

Command: man perldoc info search(apropos)  


SELECT(7)                         PostgreSQL 12.3 Documentation                         SELECT(7)



NAME
       SELECT, TABLE, WITH - retrieve rows from a table or view

SYNOPSIS
       [ WITH [ RECURSIVE ] with_query [, ...] ]
       SELECT [ ALL | DISTINCT [ ON ( expression [, ...] ) ] ]
           [ * | expression [ [ AS ] output_name ] [, ...] ]
           [ FROM from_item [, ...] ]
           [ WHERE condition ]
           [ GROUP BY grouping_element [, ...] ]
           [ HAVING condition [, ...] ]
           [ WINDOW window_name AS ( window_definition ) [, ...] ]
           [ { UNION | INTERSECT | EXCEPT } [ ALL | DISTINCT ] select ]
           [ ORDER BY expression [ ASC | DESC | USING operator ] [ NULLS { FIRST | LAST } ] [, ...] ]
           [ LIMIT { count | ALL } ]
           [ OFFSET start [ ROW | ROWS ] ]
           [ FETCH { FIRST | NEXT } [ count ] { ROW | ROWS } ONLY ]
           [ FOR { UPDATE | NO KEY UPDATE | SHARE | KEY SHARE } [ OF table_name [, ...] ] [ NOWAIT | SKIP LOCKED ] [...] ]

       where from_item can be one of:

           [ ONLY ] table_name [ * ] [ [ AS ] alias [ ( column_alias [, ...] ) ] ]
                       [ TABLESAMPLE sampling_method ( argument [, ...] ) [ REPEATABLE ( seed ) ] ]
           [ LATERAL ] ( select ) [ AS ] alias [ ( column_alias [, ...] ) ]
           with_query_name [ [ AS ] alias [ ( column_alias [, ...] ) ] ]
           [ LATERAL ] function_name ( [ argument [, ...] ] )
                       [ WITH ORDINALITY ] [ [ AS ] alias [ ( column_alias [, ...] ) ] ]
           [ LATERAL ] function_name ( [ argument [, ...] ] ) [ AS ] alias ( column_definition [, ...] )
           [ LATERAL ] function_name ( [ argument [, ...] ] ) AS ( column_definition [, ...] )
           [ LATERAL ] ROWS FROM( function_name ( [ argument [, ...] ] ) [ AS ( column_definition [, ...] ) ] [, ...] )
                       [ WITH ORDINALITY ] [ [ AS ] alias [ ( column_alias [, ...] ) ] ]
           from_item [ NATURAL ] join_type from_item [ ON join_condition | USING ( join_column [, ...] ) ]

       and grouping_element can be one of:

           ( )
           expression
           ( expression [, ...] )
           ROLLUP ( { expression | ( expression [, ...] ) } [, ...] )
           CUBE ( { expression | ( expression [, ...] ) } [, ...] )
           GROUPING SETS ( grouping_element [, ...] )

       and with_query is:

           with_query_name [ ( column_name [, ...] ) ] AS [ [ NOT ] MATERIALIZED ] ( select | values | insert | update | delete )

       TABLE [ ONLY ] table_name [ * ]

DESCRIPTION
       SELECT retrieves rows from zero or more tables. The general processing of SELECT is as
       follows:

        1. All queries in the WITH list are computed. These effectively serve as temporary tables
           that can be referenced in the FROM list. A WITH query that is referenced more than
           once in FROM is computed only once, unless specified otherwise with NOT MATERIALIZED.
           (See WITH Clause below.)

        2. All elements in the FROM list are computed. (Each element in the FROM list is a real
           or virtual table.) If more than one element is specified in the FROM list, they are
           cross-joined together. (See FROM Clause below.)

        3. If the WHERE clause is specified, all rows that do not satisfy the condition are
           eliminated from the output. (See WHERE Clause below.)

        4. If the GROUP BY clause is specified, or if there are aggregate function calls, the
           output is combined into groups of rows that match on one or more values, and the
           results of aggregate functions are computed. If the HAVING clause is present, it
           eliminates groups that do not satisfy the given condition. (See GROUP BY Clause and
           HAVING Clause below.)

        5. The actual output rows are computed using the SELECT output expressions for each
           selected row or row group. (See SELECT List below.)

        6. SELECT DISTINCT eliminates duplicate rows from the result.  SELECT DISTINCT ON
           eliminates rows that match on all the specified expressions.  SELECT ALL (the default)
           will return all candidate rows, including duplicates. (See DISTINCT Clause below.)

        7. Using the operators UNION, INTERSECT, and EXCEPT, the output of more than one SELECT
           statement can be combined to form a single result set. The UNION operator returns all
           rows that are in one or both of the result sets. The INTERSECT operator returns all
           rows that are strictly in both result sets. The EXCEPT operator returns the rows that
           are in the first result set but not in the second. In all three cases, duplicate rows
           are eliminated unless ALL is specified. The noise word DISTINCT can be added to
           explicitly specify eliminating duplicate rows. Notice that DISTINCT is the default
           behavior here, even though ALL is the default for SELECT itself. (See UNION Clause,
           INTERSECT Clause, and EXCEPT Clause below.)

        8. If the ORDER BY clause is specified, the returned rows are sorted in the specified
           order. If ORDER BY is not given, the rows are returned in whatever order the system
           finds fastest to produce. (See ORDER BY Clause below.)

        9. If the LIMIT (or FETCH FIRST) or OFFSET clause is specified, the SELECT statement only
           returns a subset of the result rows. (See LIMIT Clause below.)

       10. If FOR UPDATE, FOR NO KEY UPDATE, FOR SHARE or FOR KEY SHARE is specified, the SELECT
           statement locks the selected rows against concurrent updates. (See The Locking Clause
           below.)

       You must have SELECT privilege on each column used in a SELECT command. The use of FOR NO
       KEY UPDATE, FOR UPDATE, FOR SHARE or FOR KEY SHARE requires UPDATE privilege as well (for
       at least one column of each table so selected).

PARAMETERS
   WITH Clause
       The WITH clause allows you to specify one or more subqueries that can be referenced by
       name in the primary query. The subqueries effectively act as temporary tables or views for
       the duration of the primary query. Each subquery can be a SELECT, TABLE, VALUES, INSERT,
       UPDATE or DELETE statement. When writing a data-modifying statement (INSERT, UPDATE or
       DELETE) in WITH, it is usual to include a RETURNING clause. It is the output of RETURNING,
       not the underlying table that the statement modifies, that forms the temporary table that
       is read by the primary query. If RETURNING is omitted, the statement is still executed,
       but it produces no output so it cannot be referenced as a table by the primary query.

       A name (without schema qualification) must be specified for each WITH query. Optionally, a
       list of column names can be specified; if this is omitted, the column names are inferred
       from the subquery.

       If RECURSIVE is specified, it allows a SELECT subquery to reference itself by name. Such a
       subquery must have the form

           non_recursive_term UNION [ ALL | DISTINCT ] recursive_term

       where the recursive self-reference must appear on the right-hand side of the UNION. Only
       one recursive self-reference is permitted per query. Recursive data-modifying statements
       are not supported, but you can use the results of a recursive SELECT query in a
       data-modifying statement. See Section 7.8 for an example.

       Another effect of RECURSIVE is that WITH queries need not be ordered: a query can
       reference another one that is later in the list. (However, circular references, or mutual
       recursion, are not implemented.) Without RECURSIVE, WITH queries can only reference
       sibling WITH queries that are earlier in the WITH list.

       When there are multiple queries in the WITH clause, RECURSIVE should be written only once,
       immediately after WITH. It applies to all queries in the WITH clause, though it has no
       effect on queries that do not use recursion or forward references.

       The primary query and the WITH queries are all (notionally) executed at the same time.
       This implies that the effects of a data-modifying statement in WITH cannot be seen from
       other parts of the query, other than by reading its RETURNING output. If two such
       data-modifying statements attempt to modify the same row, the results are unspecified.

       A key property of WITH queries is that they are normally evaluated only once per execution
       of the primary query, even if the primary query refers to them more than once. In
       particular, data-modifying statements are guaranteed to be executed once and only once,
       regardless of whether the primary query reads all or any of their output.

       However, a WITH query can be marked NOT MATERIALIZED to remove this guarantee. In that
       case, the WITH query can be folded into the primary query much as though it were a simple
       sub-SELECT in the primary query's FROM clause. This results in duplicate computations if
       the primary query refers to that WITH query more than once; but if each such use requires
       only a few rows of the WITH query's total output, NOT MATERIALIZED can provide a net
       savings by allowing the queries to be optimized jointly.  NOT MATERIALIZED is ignored if
       it is attached to a WITH query that is recursive or is not side-effect-free (i.e., is not
       a plain SELECT containing no volatile functions).

       By default, a side-effect-free WITH query is folded into the primary query if it is used
       exactly once in the primary query's FROM clause. This allows joint optimization of the two
       query levels in situations where that should be semantically invisible. However, such
       folding can be prevented by marking the WITH query as MATERIALIZED. That might be useful,
       for example, if the WITH query is being used as an optimization fence to prevent the
       planner from choosing a bad plan.  PostgreSQL versions before v12 never did such folding,
       so queries written for older versions might rely on WITH to act as an optimization fence.

       See Section 7.8 for additional information.

   FROM Clause
       The FROM clause specifies one or more source tables for the SELECT. If multiple sources
       are specified, the result is the Cartesian product (cross join) of all the sources. But
       usually qualification conditions are added (via WHERE) to restrict the returned rows to a
       small subset of the Cartesian product.

       The FROM clause can contain the following elements:

       table_name
           The name (optionally schema-qualified) of an existing table or view. If ONLY is
           specified before the table name, only that table is scanned. If ONLY is not specified,
           the table and all its descendant tables (if any) are scanned. Optionally, * can be
           specified after the table name to explicitly indicate that descendant tables are
           included.

       alias
           A substitute name for the FROM item containing the alias. An alias is used for brevity
           or to eliminate ambiguity for self-joins (where the same table is scanned multiple
           times). When an alias is provided, it completely hides the actual name of the table or
           function; for example given FROM foo AS f, the remainder of the SELECT must refer to
           this FROM item as f not foo. If an alias is written, a column alias list can also be
           written to provide substitute names for one or more columns of the table.

       TABLESAMPLE sampling_method ( argument [, ...] ) [ REPEATABLE ( seed ) ]
           A TABLESAMPLE clause after a table_name indicates that the specified sampling_method
           should be used to retrieve a subset of the rows in that table. This sampling precedes
           the application of any other filters such as WHERE clauses. The standard PostgreSQL
           distribution includes two sampling methods, BERNOULLI and SYSTEM, and other sampling
           methods can be installed in the database via extensions.

           The BERNOULLI and SYSTEM sampling methods each accept a single argument which is the
           fraction of the table to sample, expressed as a percentage between 0 and 100. This
           argument can be any real-valued expression. (Other sampling methods might accept more
           or different arguments.) These two methods each return a randomly-chosen sample of the
           table that will contain approximately the specified percentage of the table's rows.
           The BERNOULLI method scans the whole table and selects or ignores individual rows
           independently with the specified probability. The SYSTEM method does block-level
           sampling with each block having the specified chance of being selected; all rows in
           each selected block are returned. The SYSTEM method is significantly faster than the
           BERNOULLI method when small sampling percentages are specified, but it may return a
           less-random sample of the table as a result of clustering effects.

           The optional REPEATABLE clause specifies a seed number or expression to use for
           generating random numbers within the sampling method. The seed value can be any
           non-null floating-point value. Two queries that specify the same seed and argument
           values will select the same sample of the table, if the table has not been changed
           meanwhile. But different seed values will usually produce different samples. If
           REPEATABLE is not given then a new random sample is selected for each query, based
           upon a system-generated seed. Note that some add-on sampling methods do not accept
           REPEATABLE, and will always produce new samples on each use.

       select
           A sub-SELECT can appear in the FROM clause. This acts as though its output were
           created as a temporary table for the duration of this single SELECT command. Note that
           the sub-SELECT must be surrounded by parentheses, and an alias must be provided for
           it. A VALUES(7) command can also be used here.

       with_query_name
           A WITH query is referenced by writing its name, just as though the query's name were a
           table name. (In fact, the WITH query hides any real table of the same name for the
           purposes of the primary query. If necessary, you can refer to a real table of the same
           name by schema-qualifying the table's name.) An alias can be provided in the same way
           as for a table.

       function_name
           Function calls can appear in the FROM clause. (This is especially useful for functions
           that return result sets, but any function can be used.) This acts as though the
           function's output were created as a temporary table for the duration of this single
           SELECT command. When the optional WITH ORDINALITY clause is added to the function
           call, a new column is appended after all the function's output columns with numbering
           for each row.

           An alias can be provided in the same way as for a table. If an alias is written, a
           column alias list can also be written to provide substitute names for one or more
           attributes of the function's composite return type, including the column added by
           ORDINALITY if present.

           Multiple function calls can be combined into a single FROM-clause item by surrounding
           them with ROWS FROM( ... ). The output of such an item is the concatenation of the
           first row from each function, then the second row from each function, etc. If some of
           the functions produce fewer rows than others, null values are substituted for the
           missing data, so that the total number of rows returned is always the same as for the
           function that produced the most rows.

           If the function has been defined as returning the record data type, then an alias or
           the key word AS must be present, followed by a column definition list in the form (
           column_name data_type [, ... ]). The column definition list must match the actual
           number and types of columns returned by the function.

           When using the ROWS FROM( ... ) syntax, if one of the functions requires a column
           definition list, it's preferred to put the column definition list after the function
           call inside ROWS FROM( ... ). A column definition list can be placed after the ROWS
           FROM( ... ) construct only if there's just a single function and no WITH ORDINALITY
           clause.

           To use ORDINALITY together with a column definition list, you must use the ROWS FROM(
           ... ) syntax and put the column definition list inside ROWS FROM( ... ).

       join_type
           One of

           ·   [ INNER ] JOIN

           ·   LEFT [ OUTER ] JOIN

           ·   RIGHT [ OUTER ] JOIN

           ·   FULL [ OUTER ] JOIN

           ·   CROSS JOIN

           For the INNER and OUTER join types, a join condition must be specified, namely exactly
           one of NATURAL, ON join_condition, or USING (join_column [, ...]). See below for the
           meaning. For CROSS JOIN, none of these clauses can appear.

           A JOIN clause combines two FROM items, which for convenience we will refer to as
           “tables”, though in reality they can be any type of FROM item. Use parentheses if
           necessary to determine the order of nesting. In the absence of parentheses, JOINs nest
           left-to-right. In any case JOIN binds more tightly than the commas separating
           FROM-list items.

           CROSS JOIN and INNER JOIN produce a simple Cartesian product, the same result as you
           get from listing the two tables at the top level of FROM, but restricted by the join
           condition (if any).  CROSS JOIN is equivalent to INNER JOIN ON (TRUE), that is, no
           rows are removed by qualification. These join types are just a notational convenience,
           since they do nothing you couldn't do with plain FROM and WHERE.

           LEFT OUTER JOIN returns all rows in the qualified Cartesian product (i.e., all
           combined rows that pass its join condition), plus one copy of each row in the
           left-hand table for which there was no right-hand row that passed the join condition.
           This left-hand row is extended to the full width of the joined table by inserting null
           values for the right-hand columns. Note that only the JOIN clause's own condition is
           considered while deciding which rows have matches. Outer conditions are applied
           afterwards.

           Conversely, RIGHT OUTER JOIN returns all the joined rows, plus one row for each
           unmatched right-hand row (extended with nulls on the left). This is just a notational
           convenience, since you could convert it to a LEFT OUTER JOIN by switching the left and
           right tables.

           FULL OUTER JOIN returns all the joined rows, plus one row for each unmatched left-hand
           row (extended with nulls on the right), plus one row for each unmatched right-hand row
           (extended with nulls on the left).

       ON join_condition
           join_condition is an expression resulting in a value of type boolean (similar to a
           WHERE clause) that specifies which rows in a join are considered to match.

       USING ( join_column [, ...] )
           A clause of the form USING ( a, b, ... ) is shorthand for ON left_table.a =
           right_table.a AND left_table.b = right_table.b .... Also, USING implies that only one
           of each pair of equivalent columns will be included in the join output, not both.

       NATURAL
           NATURAL is shorthand for a USING list that mentions all columns in the two tables that
           have matching names. If there are no common column names, NATURAL is equivalent to ON
           TRUE.

       LATERAL
           The LATERAL key word can precede a sub-SELECTFROM item. This allows the sub-SELECT to
           refer to columns of FROM items that appear before it in the FROM list. (Without
           LATERAL, each sub-SELECT is evaluated independently and so cannot cross-reference any
           other FROM item.)

           LATERAL can also precede a function-call FROM item, but in this case it is a noise
           word, because the function expression can refer to earlier FROM items in any case.

           A LATERAL item can appear at top level in the FROM list, or within a JOIN tree. In the
           latter case it can also refer to any items that are on the left-hand side of a JOIN
           that it is on the right-hand side of.

           When a FROM item contains LATERAL cross-references, evaluation proceeds as follows:
           for each row of the FROM item providing the cross-referenced column(s), or set of rows
           of multiple FROM items providing the columns, the LATERAL item is evaluated using that
           row or row set's values of the columns. The resulting row(s) are joined as usual with
           the rows they were computed from. This is repeated for each row or set of rows from
           the column source table(s).

           The column source table(s) must be INNER or LEFT joined to the LATERAL item, else
           there would not be a well-defined set of rows from which to compute each set of rows
           for the LATERAL item. Thus, although a construct such as X RIGHT JOIN LATERAL Y is
           syntactically valid, it is not actually allowed for Y to reference X.

   WHERE Clause
       The optional WHERE clause has the general form

           WHERE condition

       where condition is any expression that evaluates to a result of type boolean. Any row that
       does not satisfy this condition will be eliminated from the output. A row satisfies the
       condition if it returns true when the actual row values are substituted for any variable
       references.

   GROUP BY Clause
       The optional GROUP BY clause has the general form

           GROUP BY grouping_element [, ...]

       GROUP BY will condense into a single row all selected rows that share the same values for
       the grouped expressions. An expression used inside a grouping_element can be an input
       column name, or the name or ordinal number of an output column (SELECT list item), or an
       arbitrary expression formed from input-column values. In case of ambiguity, a GROUP BY
       name will be interpreted as an input-column name rather than an output column name.

       If any of GROUPING SETS, ROLLUP or CUBE are present as grouping elements, then the GROUP
       BY clause as a whole defines some number of independent grouping sets. The effect of this
       is equivalent to constructing a UNION ALL between subqueries with the individual grouping
       sets as their GROUP BY clauses. For further details on the handling of grouping sets see
       Section 7.2.4.

       Aggregate functions, if any are used, are computed across all rows making up each group,
       producing a separate value for each group. (If there are aggregate functions but no GROUP
       BY clause, the query is treated as having a single group comprising all the selected
       rows.) The set of rows fed to each aggregate function can be further filtered by attaching
       a FILTER clause to the aggregate function call; see Section 4.2.7 for more information.
       When a FILTER clause is present, only those rows matching it are included in the input to
       that aggregate function.

       When GROUP BY is present, or any aggregate functions are present, it is not valid for the
       SELECT list expressions to refer to ungrouped columns except within aggregate functions or
       when the ungrouped column is functionally dependent on the grouped columns, since there
       would otherwise be more than one possible value to return for an ungrouped column. A
       functional dependency exists if the grouped columns (or a subset thereof) are the primary
       key of the table containing the ungrouped column.

       Keep in mind that all aggregate functions are evaluated before evaluating any “scalar”
       expressions in the HAVING clause or SELECT list. This means that, for example, a CASE
       expression cannot be used to skip evaluation of an aggregate function; see Section 4.2.14.

       Currently, FOR NO KEY UPDATE, FOR UPDATE, FOR SHARE and FOR KEY SHARE cannot be specified
       with GROUP BY.

   HAVING Clause
       The optional HAVING clause has the general form

           HAVING condition

       where condition is the same as specified for the WHERE clause.

       HAVING eliminates group rows that do not satisfy the condition.  HAVING is different from
       WHERE: WHERE filters individual rows before the application of GROUP BY, while HAVING
       filters group rows created by GROUP BY. Each column referenced in condition must
       unambiguously reference a grouping column, unless the reference appears within an
       aggregate function or the ungrouped column is functionally dependent on the grouping
       columns.

       The presence of HAVING turns a query into a grouped query even if there is no GROUP BY
       clause. This is the same as what happens when the query contains aggregate functions but
       no GROUP BY clause. All the selected rows are considered to form a single group, and the
       SELECT list and HAVING clause can only reference table columns from within aggregate
       functions. Such a query will emit a single row if the HAVING condition is true, zero rows
       if it is not true.

       Currently, FOR NO KEY UPDATE, FOR UPDATE, FOR SHARE and FOR KEY SHARE cannot be specified
       with HAVING.

   WINDOW Clause
       The optional WINDOW clause has the general form

           WINDOW window_name AS ( window_definition ) [, ...]

       where window_name is a name that can be referenced from OVER clauses or subsequent window
       definitions, and window_definition is

           [ existing_window_name ]
           [ PARTITION BY expression [, ...] ]
           [ ORDER BY expression [ ASC | DESC | USING operator ] [ NULLS { FIRST | LAST } ] [, ...] ]
           [ frame_clause ]

       If an existing_window_name is specified it must refer to an earlier entry in the WINDOW
       list; the new window copies its partitioning clause from that entry, as well as its
       ordering clause if any. In this case the new window cannot specify its own PARTITION BY
       clause, and it can specify ORDER BY only if the copied window does not have one. The new
       window always uses its own frame clause; the copied window must not specify a frame
       clause.

       The elements of the PARTITION BY list are interpreted in much the same fashion as elements
       of a GROUP BY Clause, except that they are always simple expressions and never the name or
       number of an output column. Another difference is that these expressions can contain
       aggregate function calls, which are not allowed in a regular GROUP BY clause. They are
       allowed here because windowing occurs after grouping and aggregation.

       Similarly, the elements of the ORDER BY list are interpreted in much the same fashion as
       elements of an ORDER BY Clause, except that the expressions are always taken as simple
       expressions and never the name or number of an output column.

       The optional frame_clause defines the window frame for window functions that depend on the
       frame (not all do). The window frame is a set of related rows for each row of the query
       (called the current row). The frame_clause can be one of

           { RANGE | ROWS | GROUPS } frame_start [ frame_exclusion ]
           { RANGE | ROWS | GROUPS } BETWEEN frame_start AND frame_end [ frame_exclusion ]

       where frame_start and frame_end can be one of

           UNBOUNDED PRECEDING
           offset PRECEDING
           CURRENT ROW
           offset FOLLOWING
           UNBOUNDED FOLLOWING

       and frame_exclusion can be one of

           EXCLUDE CURRENT ROW
           EXCLUDE GROUP
           EXCLUDE TIES
           EXCLUDE NO OTHERS

       If frame_end is omitted it defaults to CURRENT ROW. Restrictions are that frame_start
       cannot be UNBOUNDED FOLLOWING, frame_end cannot be UNBOUNDED PRECEDING, and the frame_end
       choice cannot appear earlier in the above list of frame_start and frame_end options than
       the frame_start choice does — for example RANGE BETWEEN CURRENT ROW AND offset PRECEDING
       is not allowed.

       The default framing option is RANGE UNBOUNDED PRECEDING, which is the same as RANGE
       BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW; it sets the frame to be all rows from the
       partition start up through the current row's last peer (a row that the window's ORDER BY
       clause considers equivalent to the current row; all rows are peers if there is no ORDER
       BY). In general, UNBOUNDED PRECEDING means that the frame starts with the first row of the
       partition, and similarly UNBOUNDED FOLLOWING means that the frame ends with the last row
       of the partition, regardless of RANGE, ROWS or GROUPS mode. In ROWS mode, CURRENT ROW
       means that the frame starts or ends with the current row; but in RANGE or GROUPS mode it
       means that the frame starts or ends with the current row's first or last peer in the ORDER
       BY ordering. The offsetPRECEDING and offsetFOLLOWING options vary in meaning depending on
       the frame mode. In ROWS mode, the offset is an integer indicating that the frame starts or
       ends that many rows before or after the current row. In GROUPS mode, the offset is an
       integer indicating that the frame starts or ends that many peer groups before or after the
       current row's peer group, where a peer group is a group of rows that are equivalent
       according to the window's ORDER BY clause. In RANGE mode, use of an offset option requires
       that there be exactly one ORDER BY column in the window definition. Then the frame
       contains those rows whose ordering column value is no more than offset less than (for
       PRECEDING) or more than (for FOLLOWING) the current row's ordering column value. In these
       cases the data type of the offset expression depends on the data type of the ordering
       column. For numeric ordering columns it is typically of the same type as the ordering
       column, but for datetime ordering columns it is an interval. In all these cases, the value
       of the offset must be non-null and non-negative. Also, while the offset does not have to
       be a simple constant, it cannot contain variables, aggregate functions, or window
       functions.

       The frame_exclusion option allows rows around the current row to be excluded from the
       frame, even if they would be included according to the frame start and frame end options.
       EXCLUDE CURRENT ROW excludes the current row from the frame.  EXCLUDE GROUP excludes the
       current row and its ordering peers from the frame.  EXCLUDE TIES excludes any peers of the
       current row from the frame, but not the current row itself.  EXCLUDE NO OTHERS simply
       specifies explicitly the default behavior of not excluding the current row or its peers.

       Beware that the ROWS mode can produce unpredictable results if the ORDER BY ordering does
       not order the rows uniquely. The RANGE and GROUPS modes are designed to ensure that rows
       that are peers in the ORDER BY ordering are treated alike: all rows of a given peer group
       will be in the frame or excluded from it.

       The purpose of a WINDOW clause is to specify the behavior of window functions appearing in
       the query's SELECT List or ORDER BY Clause. These functions can reference the WINDOW
       clause entries by name in their OVER clauses. A WINDOW clause entry does not have to be
       referenced anywhere, however; if it is not used in the query it is simply ignored. It is
       possible to use window functions without any WINDOW clause at all, since a window function
       call can specify its window definition directly in its OVER clause. However, the WINDOW
       clause saves typing when the same window definition is needed for more than one window
       function.

       Currently, FOR NO KEY UPDATE, FOR UPDATE, FOR SHARE and FOR KEY SHARE cannot be specified
       with WINDOW.

       Window functions are described in detail in Section 3.5, Section 4.2.8, and Section 7.2.5.

   SELECT List
       The SELECT list (between the key words SELECT and FROM) specifies expressions that form
       the output rows of the SELECT statement. The expressions can (and usually do) refer to
       columns computed in the FROM clause.

       Just as in a table, every output column of a SELECT has a name. In a simple SELECT this
       name is just used to label the column for display, but when the SELECT is a sub-query of a
       larger query, the name is seen by the larger query as the column name of the virtual table
       produced by the sub-query. To specify the name to use for an output column, write
       ASoutput_name after the column's expression. (You can omit AS, but only if the desired
       output name does not match any PostgreSQL keyword (see Appendix C). For protection against
       possible future keyword additions, it is recommended that you always either write AS or
       double-quote the output name.) If you do not specify a column name, a name is chosen
       automatically by PostgreSQL. If the column's expression is a simple column reference then
       the chosen name is the same as that column's name. In more complex cases a function or
       type name may be used, or the system may fall back on a generated name such as ?column?.

       An output column's name can be used to refer to the column's value in ORDER BY and GROUP
       BY clauses, but not in the WHERE or HAVING clauses; there you must write out the
       expression instead.

       Instead of an expression, * can be written in the output list as a shorthand for all the
       columns of the selected rows. Also, you can write table_name.*  as a shorthand for the
       columns coming from just that table. In these cases it is not possible to specify new
       names with AS; the output column names will be the same as the table columns' names.

       According to the SQL standard, the expressions in the output list should be computed
       before applying DISTINCT, ORDER BY, or LIMIT. This is obviously necessary when using
       DISTINCT, since otherwise it's not clear what values are being made distinct. However, in
       many cases it is convenient if output expressions are computed after ORDER BY and LIMIT;
       particularly if the output list contains any volatile or expensive functions. With that
       behavior, the order of function evaluations is more intuitive and there will not be
       evaluations corresponding to rows that never appear in the output.  PostgreSQL will
       effectively evaluate output expressions after sorting and limiting, so long as those
       expressions are not referenced in DISTINCT, ORDER BY or GROUP BY. (As a counterexample,
       SELECT f(x) FROM tab ORDER BY 1 clearly must evaluate f(x) before sorting.) Output
       expressions that contain set-returning functions are effectively evaluated after sorting
       and before limiting, so that LIMIT will act to cut off the output from a set-returning
       function.

           Note
           PostgreSQL versions before 9.6 did not provide any guarantees about the timing of
           evaluation of output expressions versus sorting and limiting; it depended on the form
           of the chosen query plan.

   DISTINCT Clause
       If SELECT DISTINCT is specified, all duplicate rows are removed from the result set (one
       row is kept from each group of duplicates).  SELECT ALL specifies the opposite: all rows
       are kept; that is the default.

       SELECT DISTINCT ON ( expression [, ...] ) keeps only the first row of each set of rows
       where the given expressions evaluate to equal. The DISTINCT ON expressions are interpreted
       using the same rules as for ORDER BY (see above). Note that the “first row” of each set is
       unpredictable unless ORDER BY is used to ensure that the desired row appears first. For
       example:

           SELECT DISTINCT ON (location) location, time, report
               FROM weather_reports
               ORDER BY location, time DESC;

       retrieves the most recent weather report for each location. But if we had not used ORDER
       BY to force descending order of time values for each location, we'd have gotten a report
       from an unpredictable time for each location.

       The DISTINCT ON expression(s) must match the leftmost ORDER BY expression(s). The ORDER BY
       clause will normally contain additional expression(s) that determine the desired
       precedence of rows within each DISTINCT ON group.

       Currently, FOR NO KEY UPDATE, FOR UPDATE, FOR SHARE and FOR KEY SHARE cannot be specified
       with DISTINCT.

   UNION Clause
       The UNION clause has this general form:

           select_statement UNION [ ALL | DISTINCT ] select_statement

       select_statement is any SELECT statement without an ORDER BY, LIMIT, FOR NO KEY UPDATE,
       FOR UPDATE, FOR SHARE, or FOR KEY SHARE clause. (ORDER BY and LIMIT can be attached to a
       subexpression if it is enclosed in parentheses. Without parentheses, these clauses will be
       taken to apply to the result of the UNION, not to its right-hand input expression.)

       The UNION operator computes the set union of the rows returned by the involved SELECT
       statements. A row is in the set union of two result sets if it appears in at least one of
       the result sets. The two SELECT statements that represent the direct operands of the UNION
       must produce the same number of columns, and corresponding columns must be of compatible
       data types.

       The result of UNION does not contain any duplicate rows unless the ALL option is
       specified.  ALL prevents elimination of duplicates. (Therefore, UNION ALL is usually
       significantly quicker than UNION; use ALL when you can.)  DISTINCT can be written to
       explicitly specify the default behavior of eliminating duplicate rows.

       Multiple UNION operators in the same SELECT statement are evaluated left to right, unless
       otherwise indicated by parentheses.

       Currently, FOR NO KEY UPDATE, FOR UPDATE, FOR SHARE and FOR KEY SHARE cannot be specified
       either for a UNION result or for any input of a UNION.

   INTERSECT Clause
       The INTERSECT clause has this general form:

           select_statement INTERSECT [ ALL | DISTINCT ] select_statement

       select_statement is any SELECT statement without an ORDER BY, LIMIT, FOR NO KEY UPDATE,
       FOR UPDATE, FOR SHARE, or FOR KEY SHARE clause.

       The INTERSECT operator computes the set intersection of the rows returned by the involved
       SELECT statements. A row is in the intersection of two result sets if it appears in both
       result sets.

       The result of INTERSECT does not contain any duplicate rows unless the ALL option is
       specified. With ALL, a row that has m duplicates in the left table and n duplicates in the
       right table will appear min(m,n) times in the result set.  DISTINCT can be written to
       explicitly specify the default behavior of eliminating duplicate rows.

       Multiple INTERSECT operators in the same SELECT statement are evaluated left to right,
       unless parentheses dictate otherwise.  INTERSECT binds more tightly than UNION. That is, A
       UNION B INTERSECT C will be read as A UNION (B INTERSECT C).

       Currently, FOR NO KEY UPDATE, FOR UPDATE, FOR SHARE and FOR KEY SHARE cannot be specified
       either for an INTERSECT result or for any input of an INTERSECT.

   EXCEPT Clause
       The EXCEPT clause has this general form:

           select_statement EXCEPT [ ALL | DISTINCT ] select_statement

       select_statement is any SELECT statement without an ORDER BY, LIMIT, FOR NO KEY UPDATE,
       FOR UPDATE, FOR SHARE, or FOR KEY SHARE clause.

       The EXCEPT operator computes the set of rows that are in the result of the left SELECT
       statement but not in the result of the right one.

       The result of EXCEPT does not contain any duplicate rows unless the ALL option is
       specified. With ALL, a row that has m duplicates in the left table and n duplicates in the
       right table will appear max(m-n,0) times in the result set.  DISTINCT can be written to
       explicitly specify the default behavior of eliminating duplicate rows.

       Multiple EXCEPT operators in the same SELECT statement are evaluated left to right, unless
       parentheses dictate otherwise.  EXCEPT binds at the same level as UNION.

       Currently, FOR NO KEY UPDATE, FOR UPDATE, FOR SHARE and FOR KEY SHARE cannot be specified
       either for an EXCEPT result or for any input of an EXCEPT.

   ORDER BY Clause
       The optional ORDER BY clause has this general form:

           ORDER BY expression [ ASC | DESC | USING operator ] [ NULLS { FIRST | LAST } ] [, ...]

       The ORDER BY clause causes the result rows to be sorted according to the specified
       expression(s). If two rows are equal according to the leftmost expression, they are
       compared according to the next expression and so on. If they are equal according to all
       specified expressions, they are returned in an implementation-dependent order.

       Each expression can be the name or ordinal number of an output column (SELECT list item),
       or it can be an arbitrary expression formed from input-column values.

       The ordinal number refers to the ordinal (left-to-right) position of the output column.
       This feature makes it possible to define an ordering on the basis of a column that does
       not have a unique name. This is never absolutely necessary because it is always possible
       to assign a name to an output column using the AS clause.

       It is also possible to use arbitrary expressions in the ORDER BY clause, including columns
       that do not appear in the SELECT output list. Thus the following statement is valid:

           SELECT name FROM distributors ORDER BY code;

       A limitation of this feature is that an ORDER BY clause applying to the result of a UNION,
       INTERSECT, or EXCEPT clause can only specify an output column name or number, not an
       expression.

       If an ORDER BY expression is a simple name that matches both an output column name and an
       input column name, ORDER BY will interpret it as the output column name. This is the
       opposite of the choice that GROUP BY will make in the same situation. This inconsistency
       is made to be compatible with the SQL standard.

       Optionally one can add the key word ASC (ascending) or DESC (descending) after any
       expression in the ORDER BY clause. If not specified, ASC is assumed by default.
       Alternatively, a specific ordering operator name can be specified in the USING clause. An
       ordering operator must be a less-than or greater-than member of some B-tree operator
       family.  ASC is usually equivalent to USING < and DESC is usually equivalent to USING >.
       (But the creator of a user-defined data type can define exactly what the default sort
       ordering is, and it might correspond to operators with other names.)

       If NULLS LAST is specified, null values sort after all non-null values; if NULLS FIRST is
       specified, null values sort before all non-null values. If neither is specified, the
       default behavior is NULLS LAST when ASC is specified or implied, and NULLS FIRST when DESC
       is specified (thus, the default is to act as though nulls are larger than non-nulls). When
       USING is specified, the default nulls ordering depends on whether the operator is a
       less-than or greater-than operator.

       Note that ordering options apply only to the expression they follow; for example ORDER BY
       x, y DESC does not mean the same thing as ORDER BY x DESC, y DESC.

       Character-string data is sorted according to the collation that applies to the column
       being sorted. That can be overridden at need by including a COLLATE clause in the
       expression, for example ORDER BY mycolumn COLLATE "en_US". For more information see
       Section 4.2.10 and Section 23.2.

   LIMIT Clause
       The LIMIT clause consists of two independent sub-clauses:

           LIMIT { count | ALL }
           OFFSET start

       count specifies the maximum number of rows to return, while start specifies the number of
       rows to skip before starting to return rows. When both are specified, start rows are
       skipped before starting to count the count rows to be returned.

       If the count expression evaluates to NULL, it is treated as LIMIT ALL, i.e., no limit. If
       start evaluates to NULL, it is treated the same as OFFSET 0.

       SQL:2008 introduced a different syntax to achieve the same result, which PostgreSQL also
       supports. It is:

           OFFSET start { ROW | ROWS }
           FETCH { FIRST | NEXT } [ count ] { ROW | ROWS } ONLY

       In this syntax, the start or count value is required by the standard to be a literal
       constant, a parameter, or a variable name; as a PostgreSQL extension, other expressions
       are allowed, but will generally need to be enclosed in parentheses to avoid ambiguity. If
       count is omitted in a FETCH clause, it defaults to 1.  ROW and ROWS as well as FIRST and
       NEXT are noise words that don't influence the effects of these clauses. According to the
       standard, the OFFSET clause must come before the FETCH clause if both are present; but
       PostgreSQL is laxer and allows either order.

       When using LIMIT, it is a good idea to use an ORDER BY clause that constrains the result
       rows into a unique order. Otherwise you will get an unpredictable subset of the query's
       rows — you might be asking for the tenth through twentieth rows, but tenth through
       twentieth in what ordering? You don't know what ordering unless you specify ORDER BY.

       The query planner takes LIMIT into account when generating a query plan, so you are very
       likely to get different plans (yielding different row orders) depending on what you use
       for LIMIT and OFFSET. Thus, using different LIMIT/OFFSET values to select different
       subsets of a query result will give inconsistent results unless you enforce a predictable
       result ordering with ORDER BY. This is not a bug; it is an inherent consequence of the
       fact that SQL does not promise to deliver the results of a query in any particular order
       unless ORDER BY is used to constrain the order.

       It is even possible for repeated executions of the same LIMIT query to return different
       subsets of the rows of a table, if there is not an ORDER BY to enforce selection of a
       deterministic subset. Again, this is not a bug; determinism of the results is simply not
       guaranteed in such a case.

   The Locking Clause
       FOR UPDATE, FOR NO KEY UPDATE, FOR SHARE and FOR KEY SHARE are locking clauses; they
       affect how SELECT locks rows as they are obtained from the table.

       The locking clause has the general form

           FOR lock_strength [ OF table_name [, ...] ] [ NOWAIT | SKIP LOCKED ]

       where lock_strength can be one of

           UPDATE
           NO KEY UPDATE
           SHARE
           KEY SHARE

       For more information on each row-level lock mode, refer to Section 13.3.2.

       To prevent the operation from waiting for other transactions to commit, use either the
       NOWAIT or SKIP LOCKED option. With NOWAIT, the statement reports an error, rather than
       waiting, if a selected row cannot be locked immediately. With SKIP LOCKED, any selected
       rows that cannot be immediately locked are skipped. Skipping locked rows provides an
       inconsistent view of the data, so this is not suitable for general purpose work, but can
       be used to avoid lock contention with multiple consumers accessing a queue-like table.
       Note that NOWAIT and SKIP LOCKED apply only to the row-level lock(s) — the required ROW
       SHARE table-level lock is still taken in the ordinary way (see Chapter 13). You can use
       LOCK(7) with the NOWAIT option first, if you need to acquire the table-level lock without
       waiting.

       If specific tables are named in a locking clause, then only rows coming from those tables
       are locked; any other tables used in the SELECT are simply read as usual. A locking clause
       without a table list affects all tables used in the statement. If a locking clause is
       applied to a view or sub-query, it affects all tables used in the view or sub-query.
       However, these clauses do not apply to WITH queries referenced by the primary query. If
       you want row locking to occur within a WITH query, specify a locking clause within the
       WITH query.

       Multiple locking clauses can be written if it is necessary to specify different locking
       behavior for different tables. If the same table is mentioned (or implicitly affected) by
       more than one locking clause, then it is processed as if it was only specified by the
       strongest one. Similarly, a table is processed as NOWAIT if that is specified in any of
       the clauses affecting it. Otherwise, it is processed as SKIP LOCKED if that is specified
       in any of the clauses affecting it.

       The locking clauses cannot be used in contexts where returned rows cannot be clearly
       identified with individual table rows; for example they cannot be used with aggregation.

       When a locking clause appears at the top level of a SELECT query, the rows that are locked
       are exactly those that are returned by the query; in the case of a join query, the rows
       locked are those that contribute to returned join rows. In addition, rows that satisfied
       the query conditions as of the query snapshot will be locked, although they will not be
       returned if they were updated after the snapshot and no longer satisfy the query
       conditions. If a LIMIT is used, locking stops once enough rows have been returned to
       satisfy the limit (but note that rows skipped over by OFFSET will get locked). Similarly,
       if a locking clause is used in a cursor's query, only rows actually fetched or stepped
       past by the cursor will be locked.

       When a locking clause appears in a sub-SELECT, the rows locked are those returned to the
       outer query by the sub-query. This might involve fewer rows than inspection of the
       sub-query alone would suggest, since conditions from the outer query might be used to
       optimize execution of the sub-query. For example,

           SELECT * FROM (SELECT * FROM mytable FOR UPDATE) ss WHERE col1 = 5;

       will lock only rows having col1 = 5, even though that condition is not textually within
       the sub-query.

       Previous releases failed to preserve a lock which is upgraded by a later savepoint. For
       example, this code:

           BEGIN;
           SELECT * FROM mytable WHERE key = 1 FOR UPDATE;
           SAVEPOINT s;
           UPDATE mytable SET ... WHERE key = 1;
           ROLLBACK TO s;

       would fail to preserve the FOR UPDATE lock after the ROLLBACK TO. This has been fixed in
       release 9.3.

           Caution
           It is possible for a SELECT command running at the READ COMMITTED transaction
           isolation level and using ORDER BY and a locking clause to return rows out of order.
           This is because ORDER BY is applied first. The command sorts the result, but might
           then block trying to obtain a lock on one or more of the rows. Once the SELECT
           unblocks, some of the ordering column values might have been modified, leading to
           those rows appearing to be out of order (though they are in order in terms of the
           original column values). This can be worked around at need by placing the FOR
           UPDATE/SHARE clause in a sub-query, for example

               SELECT * FROM (SELECT * FROM mytable FOR UPDATE) ss ORDER BY column1;

           Note that this will result in locking all rows of mytable, whereas FOR UPDATE at the
           top level would lock only the actually returned rows. This can make for a significant
           performance difference, particularly if the ORDER BY is combined with LIMIT or other
           restrictions. So this technique is recommended only if concurrent updates of the
           ordering columns are expected and a strictly sorted result is required.

           At the REPEATABLE READ or SERIALIZABLE transaction isolation level this would cause a
           serialization failure (with a SQLSTATE of '40001'), so there is no possibility of
           receiving rows out of order under these isolation levels.

   TABLE Command
       The command

           TABLE name

       is equivalent to

           SELECT * FROM name

       It can be used as a top-level command or as a space-saving syntax variant in parts of
       complex queries. Only the WITH, UNION, INTERSECT, EXCEPT, ORDER BY, LIMIT, OFFSET, FETCH
       and FOR locking clauses can be used with TABLE; the WHERE clause and any form of
       aggregation cannot be used.

EXAMPLES
       To join the table films with the table distributors:

           SELECT f.title, f.did, d.name, f.date_prod, f.kind
               FROM distributors d, films f
               WHERE f.did = d.did

                  title       | did |     name     | date_prod  |   kind
           -------------------+-----+--------------+------------+----------
            The Third Man     | 101 | British Lion | 1949-12-23 | Drama
            The African Queen | 101 | British Lion | 1951-08-11 | Romantic
            ...

       To sum the column len of all films and group the results by kind:

           SELECT kind, sum(len) AS total FROM films GROUP BY kind;

              kind   | total
           ----------+-------
            Action   | 07:34
            Comedy   | 02:58
            Drama    | 14:28
            Musical  | 06:42
            Romantic | 04:38

       To sum the column len of all films, group the results by kind and show those group totals
       that are less than 5 hours:

           SELECT kind, sum(len) AS total
               FROM films
               GROUP BY kind
               HAVING sum(len) < interval '5 hours';

              kind   | total
           ----------+-------
            Comedy   | 02:58
            Romantic | 04:38

       The following two examples are identical ways of sorting the individual results according
       to the contents of the second column (name):

           SELECT * FROM distributors ORDER BY name;
           SELECT * FROM distributors ORDER BY 2;

            did |       name
           -----+------------------
            109 | 20th Century Fox
            110 | Bavaria Atelier
            101 | British Lion
            107 | Columbia
            102 | Jean Luc Godard
            113 | Luso films
            104 | Mosfilm
            103 | Paramount
            106 | Toho
            105 | United Artists
            111 | Walt Disney
            112 | Warner Bros.
            108 | Westward

       The next example shows how to obtain the union of the tables distributors and actors,
       restricting the results to those that begin with the letter W in each table. Only distinct
       rows are wanted, so the key word ALL is omitted.

           distributors:               actors:
            did |     name              id |     name
           -----+--------------        ----+----------------
            108 | Westward               1 | Woody Allen
            111 | Walt Disney            2 | Warren Beatty
            112 | Warner Bros.           3 | Walter Matthau
            ...                         ...

           SELECT distributors.name
               FROM distributors
               WHERE distributors.name LIKE 'W%'
           UNION
           SELECT actors.name
               FROM actors
               WHERE actors.name LIKE 'W%';

                 name
           ----------------
            Walt Disney
            Walter Matthau
            Warner Bros.
            Warren Beatty
            Westward
            Woody Allen

       This example shows how to use a function in the FROM clause, both with and without a
       column definition list:

           CREATE FUNCTION distributors(int) RETURNS SETOF distributors AS $$
               SELECT * FROM distributors WHERE did = $1;
           $$ LANGUAGE SQL;

           SELECT * FROM distributors(111);
            did |    name
           -----+-------------
            111 | Walt Disney

           CREATE FUNCTION distributors_2(int) RETURNS SETOF record AS $$
               SELECT * FROM distributors WHERE did = $1;
           $$ LANGUAGE SQL;

           SELECT * FROM distributors_2(111) AS (f1 int, f2 text);
            f1  |     f2
           -----+-------------
            111 | Walt Disney

       Here is an example of a function with an ordinality column added:

           SELECT * FROM unnest(ARRAY['a','b','c','d','e','f']) WITH ORDINALITY;
            unnest | ordinality
           --------+----------
            a      |        1
            b      |        2
            c      |        3
            d      |        4
            e      |        5
            f      |        6
           (6 rows)

       This example shows how to use a simple WITH clause:

           WITH t AS (
               SELECT random() as x FROM generate_series(1, 3)
             )
           SELECT * FROM t
           UNION ALL
           SELECT * FROM t

                    x
           --------------------
             0.534150459803641
             0.520092216785997
            0.0735620250925422
             0.534150459803641
             0.520092216785997
            0.0735620250925422

       Notice that the WITH query was evaluated only once, so that we got two sets of the same
       three random values.

       This example uses WITH RECURSIVE to find all subordinates (direct or indirect) of the
       employee Mary, and their level of indirectness, from a table that shows only direct
       subordinates:

           WITH RECURSIVE employee_recursive(distance, employee_name, manager_name) AS (
               SELECT 1, employee_name, manager_name
               FROM employee
               WHERE manager_name = 'Mary'
             UNION ALL
               SELECT er.distance + 1, e.employee_name, e.manager_name
               FROM employee_recursive er, employee e
               WHERE er.employee_name = e.manager_name
             )
           SELECT distance, employee_name FROM employee_recursive;

       Notice the typical form of recursive queries: an initial condition, followed by UNION,
       followed by the recursive part of the query. Be sure that the recursive part of the query
       will eventually return no tuples, or else the query will loop indefinitely. (See
       Section 7.8 for more examples.)

       This example uses LATERAL to apply a set-returning function get_product_names() for each
       row of the manufacturers table:

           SELECT m.name AS mname, pname
           FROM manufacturers m, LATERAL get_product_names(m.id) pname;

       Manufacturers not currently having any products would not appear in the result, since it
       is an inner join. If we wished to include the names of such manufacturers in the result,
       we could do:

           SELECT m.name AS mname, pname
           FROM manufacturers m LEFT JOIN LATERAL get_product_names(m.id) pname ON true;

COMPATIBILITY
       Of course, the SELECT statement is compatible with the SQL standard. But there are some
       extensions and some missing features.

   Omitted FROM Clauses
       PostgreSQL allows one to omit the FROM clause. It has a straightforward use to compute the
       results of simple expressions:

           SELECT 2+2;

            ?column?
           ----------
                   4

       Some other SQL databases cannot do this except by introducing a dummy one-row table from
       which to do the SELECT.

       Note that if a FROM clause is not specified, the query cannot reference any database
       tables. For example, the following query is invalid:

           SELECT distributors.* WHERE distributors.name = 'Westward';

       PostgreSQL releases prior to 8.1 would accept queries of this form, and add an implicit
       entry to the query's FROM clause for each table referenced by the query. This is no longer
       allowed.

   Empty SELECT Lists
       The list of output expressions after SELECT can be empty, producing a zero-column result
       table. This is not valid syntax according to the SQL standard.  PostgreSQL allows it to be
       consistent with allowing zero-column tables. However, an empty list is not allowed when
       DISTINCT is used.

   Omitting the AS Key Word
       In the SQL standard, the optional key word AS can be omitted before an output column name
       whenever the new column name is a valid column name (that is, not the same as any reserved
       keyword).  PostgreSQL is slightly more restrictive: AS is required if the new column name
       matches any keyword at all, reserved or not. Recommended practice is to use AS or
       double-quote output column names, to prevent any possible conflict against future keyword
       additions.

       In FROM items, both the standard and PostgreSQL allow AS to be omitted before an alias
       that is an unreserved keyword. But this is impractical for output column names, because of
       syntactic ambiguities.

   ONLY and Inheritance
       The SQL standard requires parentheses around the table name when writing ONLY, for example
       SELECT * FROM ONLY (tab1), ONLY (tab2) WHERE ....  PostgreSQL considers these parentheses
       to be optional.

       PostgreSQL allows a trailing * to be written to explicitly specify the non-ONLY behavior
       of including child tables. The standard does not allow this.

       (These points apply equally to all SQL commands supporting the ONLY option.)

   TABLESAMPLE Clause Restrictions
       The TABLESAMPLE clause is currently accepted only on regular tables and materialized
       views. According to the SQL standard it should be possible to apply it to any FROM item.

   Function Calls in FROM
       PostgreSQL allows a function call to be written directly as a member of the FROM list. In
       the SQL standard it would be necessary to wrap such a function call in a sub-SELECT; that
       is, the syntax FROM func(...) alias is approximately equivalent to FROM LATERAL (SELECT
       func(...)) alias. Note that LATERAL is considered to be implicit; this is because the
       standard requires LATERAL semantics for an UNNEST() item in FROM.  PostgreSQL treats
       UNNEST() the same as other set-returning functions.

   Namespace Available to GROUP BY and ORDER BY
       In the SQL-92 standard, an ORDER BY clause can only use output column names or numbers,
       while a GROUP BY clause can only use expressions based on input column names.  PostgreSQL
       extends each of these clauses to allow the other choice as well (but it uses the
       standard's interpretation if there is ambiguity).  PostgreSQL also allows both clauses to
       specify arbitrary expressions. Note that names appearing in an expression will always be
       taken as input-column names, not as output-column names.

       SQL:1999 and later use a slightly different definition which is not entirely upward
       compatible with SQL-92. In most cases, however, PostgreSQL will interpret an ORDER BY or
       GROUP BY expression the same way SQL:1999 does.

   Functional Dependencies
       PostgreSQL recognizes functional dependency (allowing columns to be omitted from GROUP BY)
       only when a table's primary key is included in the GROUP BY list. The SQL standard
       specifies additional conditions that should be recognized.

   LIMIT and OFFSET
       The clauses LIMIT and OFFSET are PostgreSQL-specific syntax, also used by MySQL. The
       SQL:2008 standard has introduced the clauses OFFSET ... FETCH {FIRST|NEXT} ...  for the
       same functionality, as shown above in LIMIT Clause. This syntax is also used by IBM DB2.
       (Applications written for Oracle frequently use a workaround involving the automatically
       generated rownum column, which is not available in PostgreSQL, to implement the effects of
       these clauses.)

   FOR NO KEY UPDATE, FOR UPDATE, FOR SHARE, FOR KEY SHARE
       Although FOR UPDATE appears in the SQL standard, the standard allows it only as an option
       of DECLARE CURSOR.  PostgreSQL allows it in any SELECT query as well as in sub-SELECTs,
       but this is an extension. The FOR NO KEY UPDATE, FOR SHARE and FOR KEY SHARE variants, as
       well as the NOWAIT and SKIP LOCKED options, do not appear in the standard.

   Data-Modifying Statements in WITH
       PostgreSQL allows INSERT, UPDATE, and DELETE to be used as WITH queries. This is not found
       in the SQL standard.

   Nonstandard Clauses
       DISTINCT ON ( ... ) is an extension of the SQL standard.

       ROWS FROM( ... ) is an extension of the SQL standard.

       The MATERIALIZED and NOT MATERIALIZED options of WITH are extensions of the SQL standard.



PostgreSQL 12.3                                2020                                     SELECT(7)


/man
rootr.net - man pages