:: RootR ::  Hosting Order Map Login   Secure Inter-Network Operations  
 
git-blame(1) - phpMan

Command: man perldoc info search(apropos)  


GIT-BLAME(1)                                Git Manual                               GIT-BLAME(1)



NAME
       git-blame - Show what revision and author last modified each line of a file

SYNOPSIS
       git blame [-c] [-b] [-l] [--root] [-t] [-f] [-n] [-s] [-e] [-p] [-w] [--incremental]
                   [-L <range>] [-S <revs-file>] [-M] [-C] [-C] [-C] [--since=<date>]
                   [--abbrev=<n>] [<rev> | --contents <file> | --reverse <rev>] [--] <file>


DESCRIPTION
       Annotates each line in the given file with information from the revision which last
       modified the line. Optionally, start annotating from the given revision.

       When specified one or more times, -L restricts annotation to the requested lines.

       The origin of lines is automatically followed across whole-file renames (currently there
       is no option to turn the rename-following off). To follow lines moved from one file to
       another, or to follow lines that were copied and pasted from another file, etc., see the
       -C and -M options.

       The report does not tell you anything about lines which have been deleted or replaced; you
       need to use a tool such as git diff or the "pickaxe" interface briefly mentioned in the
       following paragraph.

       Apart from supporting file annotation, Git also supports searching the development history
       for when a code snippet occurred in a change. This makes it possible to track when a code
       snippet was added to a file, moved or copied between files, and eventually deleted or
       replaced. It works by searching for a text string in the diff. A small example of the
       pickaxe interface that searches for blame_usage:

           $ git log --pretty=oneline -S'blame_usage'
           5040f17eba15504bad66b14a645bddd9b015ebb7 blame -S <ancestry-file>
           ea4c7f9bf69e781dd0cd88d2bccb2bf5cc15c9a7 git-blame: Make the output


OPTIONS
       -b
           Show blank SHA-1 for boundary commits. This can also be controlled via the
           blame.blankboundary config option.

       --root
           Do not treat root commits as boundaries. This can also be controlled via the
           blame.showroot config option.

       --show-stats
           Include additional statistics at the end of blame output.

       -L <start>,<end>, -L :<regex>
           Annotate only the given line range. May be specified multiple times. Overlapping
           ranges are allowed.

           <start> and <end> are optional. “-L <start>” or “-L <start>,” spans from <start> to
           end of file. “-L ,<end>” spans from start of file to <end>.

           <start> and <end> can take one of these forms:

           ·   number

               If <start> or <end> is a number, it specifies an absolute line number (lines count
               from 1).

           ·   /regex/

               This form will use the first line matching the given POSIX regex. If <start> is a
               regex, it will search from the end of the previous -L range, if any, otherwise
               from the start of file. If <start> is “^/regex/”, it will search from the start of
               file. If <end> is a regex, it will search starting at the line given by <start>.

           ·   +offset or -offset

               This is only valid for <end> and will specify a number of lines before or after
               the line given by <start>.

           If “:<regex>” is given in place of <start> and <end>, it denotes the range from the
           first funcname line that matches <regex>, up to the next funcname line. “:<regex>”
           searches from the end of the previous -L range, if any, otherwise from the start of
           file. “^:<regex>” searches from the start of file.

       -l
           Show long rev (Default: off).

       -t
           Show raw timestamp (Default: off).

       -S <revs-file>
           Use revisions from revs-file instead of calling git-rev-list(1).

       --reverse
           Walk history forward instead of backward. Instead of showing the revision in which a
           line appeared, this shows the last revision in which a line has existed. This requires
           a range of revision like START..END where the path to blame exists in START.

       -p, --porcelain
           Show in a format designed for machine consumption.

       --line-porcelain
           Show the porcelain format, but output commit information for each line, not just the
           first time a commit is referenced. Implies --porcelain.

       --incremental
           Show the result incrementally in a format designed for machine consumption.

       --encoding=<encoding>
           Specifies the encoding used to output author names and commit summaries. Setting it to
           none makes blame output unconverted data. For more information see the discussion
           about encoding in the git-log(1) manual page.

       --contents <file>
           When <rev> is not specified, the command annotates the changes starting backwards from
           the working tree copy. This flag makes the command pretend as if the working tree copy
           has the contents of the named file (specify - to make the command read from the
           standard input).

       --date <format>
           The value is one of the following alternatives:
           {relative,local,default,iso,rfc,short}. If --date is not provided, the value of the
           blame.date config variable is used. If the blame.date config variable is also not set,
           the iso format is used. For more information, See the discussion of the --date option
           at git-log(1).

       -M|<num>|
           Detect moved or copied lines within a file. When a commit moves or copies a block of
           lines (e.g. the original file has A and then B, and the commit changes it to B and
           then A), the traditional blame algorithm notices only half of the movement and
           typically blames the lines that were moved up (i.e. B) to the parent and assigns blame
           to the lines that were moved down (i.e. A) to the child commit. With this option, both
           groups of lines are blamed on the parent by running extra passes of inspection.

           <num> is optional but it is the lower bound on the number of alphanumeric characters
           that Git must detect as moving/copying within a file for it to associate those lines
           with the parent commit. The default value is 20.

       -C|<num>|
           In addition to -M, detect lines moved or copied from other files that were modified in
           the same commit. This is useful when you reorganize your program and move code around
           across files. When this option is given twice, the command additionally looks for
           copies from other files in the commit that creates the file. When this option is given
           three times, the command additionally looks for copies from other files in any commit.

           <num> is optional but it is the lower bound on the number of alphanumeric characters
           that Git must detect as moving/copying between files for it to associate those lines
           with the parent commit. And the default value is 40. If there are more than one -C
           options given, the <num> argument of the last -C will take effect.

       -h
           Show help message.

       -c
           Use the same output mode as git-annotate(1) (Default: off).

       --score-debug
           Include debugging information related to the movement of lines between files (see -C)
           and lines moved within a file (see -M). The first number listed is the score. This is
           the number of alphanumeric characters detected as having been moved between or within
           files. This must be above a certain threshold for git blame to consider those lines of
           code to have been moved.

       -f, --show-name
           Show the filename in the original commit. By default the filename is shown if there is
           any line that came from a file with a different name, due to rename detection.

       -n, --show-number
           Show the line number in the original commit (Default: off).

       -s
           Suppress the author name and timestamp from the output.

       -e, --show-email
           Show the author email instead of author name (Default: off).

       -w
           Ignore whitespace when comparing the parent’s version and the child’s to find where
           the lines came from.

       --abbrev=<n>
           Instead of using the default 7+1 hexadecimal digits as the abbreviated object name,
           use <n>+1 digits. Note that 1 column is used for a caret to mark the boundary commit.

THE PORCELAIN FORMAT
       In this format, each line is output after a header; the header at the minimum has the
       first line which has:

       ·   40-byte SHA-1 of the commit the line is attributed to;

       ·   the line number of the line in the original file;

       ·   the line number of the line in the final file;

       ·   on a line that starts a group of lines from a different commit than the previous one,
           the number of lines in this group. On subsequent lines this field is absent.

       This header line is followed by the following information at least once for each commit:

       ·   the author name ("author"), email ("author-mail"), time ("author-time"), and time zone
           ("author-tz"); similarly for committer.

       ·   the filename in the commit that the line is attributed to.

       ·   the first line of the commit log message ("summary").

       The contents of the actual line is output after the above header, prefixed by a TAB. This
       is to allow adding more header elements later.

       The porcelain format generally suppresses commit information that has already been seen.
       For example, two lines that are blamed to the same commit will both be shown, but the
       details for that commit will be shown only once. This is more efficient, but may require
       more state be kept by the reader. The --line-porcelain option can be used to output full
       commit information for each line, allowing simpler (but less efficient) usage like:

           # count the number of lines attributed to each author
           git blame --line-porcelain file |
           sed -n 's/^author //p' |
           sort | uniq -c | sort -rn

SPECIFYING RANGES
       Unlike git blame and git annotate in older versions of git, the extent of the annotation
       can be limited to both line ranges and revision ranges. The -L option, which limits
       annotation to a range of lines, may be specified multiple times.

       When you are interested in finding the origin for lines 40-60 for file foo, you can use
       the -L option like so (they mean the same thing — both ask for 21 lines starting at line
       40):

           git blame -L 40,60 foo
           git blame -L 40,+21 foo

       Also you can use a regular expression to specify the line range:

           git blame -L '/^sub hello {/,/^}$/' foo

       which limits the annotation to the body of the hello subroutine.

       When you are not interested in changes older than version v2.6.18, or changes older than 3
       weeks, you can use revision range specifiers similar to git rev-list:

           git blame v2.6.18.. -- foo
           git blame --since=3.weeks -- foo

       When revision range specifiers are used to limit the annotation, lines that have not
       changed since the range boundary (either the commit v2.6.18 or the most recent commit that
       is more than 3 weeks old in the above example) are blamed for that range boundary commit.

       A particularly useful way is to see if an added file has lines created by copy-and-paste
       from existing files. Sometimes this indicates that the developer was being sloppy and did
       not refactor the code properly. You can first find the commit that introduced the file
       with:

           git log --diff-filter=A --pretty=short -- foo

       and then annotate the change between the commit and its parents, using commit^! notation:

           git blame -C -C -f $commit^! -- foo

INCREMENTAL OUTPUT
       When called with --incremental option, the command outputs the result as it is built. The
       output generally will talk about lines touched by more recent commits first (i.e. the
       lines will be annotated out of order) and is meant to be used by interactive viewers.

       The output format is similar to the Porcelain format, but it does not contain the actual
       lines from the file that is being annotated.

        1. Each blame entry always starts with a line of:

               <40-byte hex sha1> <sourceline> <resultline> <num_lines>

           Line numbers count from 1.

        2. The first time that a commit shows up in the stream, it has various other information
           about it printed out with a one-word tag at the beginning of each line describing the
           extra commit information (author, email, committer, dates, summary, etc.).

        3. Unlike the Porcelain format, the filename information is always given and terminates
           the entry:

               "filename" <whitespace-quoted-filename-goes-here>

           and thus it is really quite easy to parse for some line- and word-oriented parser
           (which should be quite natural for most scripting languages).

               Note
               For people who do parsing: to make it more robust, just ignore any lines between
               the first and last one ("<sha1>" and "filename" lines) where you do not recognize
               the tag words (or care about that particular one) at the beginning of the
               "extended information" lines. That way, if there is ever added information (like
               the commit encoding or extended commit commentary), a blame viewer will not care.

MAPPING AUTHORS
       If the file .mailmap exists at the toplevel of the repository, or at the location pointed
       to by the mailmap.file or mailmap.blob configuration options, it is used to map author and
       committer names and email addresses to canonical real names and email addresses.

       In the simple form, each line in the file consists of the canonical real name of an
       author, whitespace, and an email address used in the commit (enclosed by < and >) to map
       to the name. For example:

           Proper Name <commit AT email.xx>

       The more complex forms are:

           <proper AT email.xx> <commit AT email.xx>

       which allows mailmap to replace only the email part of a commit, and:

           Proper Name <proper AT email.xx> <commit AT email.xx>

       which allows mailmap to replace both the name and the email of a commit matching the
       specified commit email address, and:

           Proper Name <proper AT email.xx> Commit Name <commit AT email.xx>

       which allows mailmap to replace both the name and the email of a commit matching both the
       specified commit name and email address.

       Example 1: Your history contains commits by two authors, Jane and Joe, whose names appear
       in the repository under several forms:

           Joe Developer <joe AT example.com>
           Joe R. Developer <joe AT example.com>
           Jane Doe <jane AT example.com>
           Jane Doe <jane@laptop.(none)>
           Jane D. <jane@desktop.(none)>


       Now suppose that Joe wants his middle name initial used, and Jane prefers her family name
       fully spelled out. A proper .mailmap file would look like:

           Jane Doe         <jane@desktop.(none)>
           Joe R. Developer <joe AT example.com>


       Note how there is no need for an entry for <jane@laptop.(none)>, because the real name of
       that author is already correct.

       Example 2: Your repository contains commits from the following authors:

           nick1 <bugs AT company.xx>
           nick2 <bugs AT company.xx>
           nick2 <nick2 AT company.xx>
           santa <me AT company.xx>
           claus <me AT company.xx>
           CTO <cto AT coompany.xx>


       Then you might want a .mailmap file that looks like:

           <cto AT company.xx>                       <cto AT coompany.xx>
           Some Dude <some AT dude.xx>         nick1 <bugs AT company.xx>
           Other Author <other AT author.xx>   nick2 <bugs AT company.xx>
           Other Author <other AT author.xx>         <nick2 AT company.xx>
           Santa Claus <santa.claus AT northpole.xx> <me AT company.xx>


       Use hash # for comments that are either on their own line, or after the email address.

SEE ALSO
       git-annotate(1)

GIT
       Part of the git(1) suite



Git 2.1.4                                   05/28/2018                               GIT-BLAME(1)


/man
rootr.net - man pages