rootr.net : rootr.net : qemu-system-ppc64(1)

:: RootR ::

Secure Inter-Network Operations

qemu-system-ppc64(1) - phpMan

QEMU(1) QEMU(1)

NAME
qemu-doc - QEMU Emulator User Documentation

SYNOPSIS
usage: qemu-system-i386 [options] [disk_image]

DESCRIPTION
The QEMU PC System emulator simulates the following peripherals:

- i440FX host PCI bridge and PIIX3 PCI to ISA bridge

- Cirrus CLGD 5446 PCI VGA card or dummy VGA card with Bochs VESA extensions (hardware
level, including all non standard modes).

- PS/2 mouse and keyboard

- 2 PCI IDE interfaces with hard disk and CD-ROM support

- Floppy disk

- PCI and ISA network adapters

- Serial ports

- Creative SoundBlaster 16 sound card

- ENSONIQ AudioPCI ES1370 sound card

- Intel 82801AA AC97 Audio compatible sound card

- Intel HD Audio Controller and HDA codec

- Adlib (OPL2) - Yamaha YM3812 compatible chip

- Gravis Ultrasound GF1 sound card

- CS4231A compatible sound card

- PCI UHCI USB controller and a virtual USB hub.

SMP is supported with up to 255 CPUs.

QEMU uses the PC BIOS from the Seabios project and the Plex86/Bochs LGPL VGA BIOS.

QEMU uses YM3812 emulation by Tatsuyuki Satoh.

QEMU uses GUS emulation (GUSEMU32 <http://www.deinmeister.de/gusemu/>) by Tibor "TS"
Schütz.

Note that, by default, GUS shares IRQ(7) with parallel ports and so QEMU must be told to
not have parallel ports to have working GUS.

qemu-system-i386 dos.img -soundhw gus -parallel none

Alternatively:

qemu-system-i386 dos.img -device gus,irq=5

Or some other unclaimed IRQ.

CS4231A is the chip used in Windows Sound System and GUSMAX products

OPTIONS
disk_image is a raw hard disk image for IDE hard disk 0. Some targets do not need a disk
image.

Standard options:

-h Display help and exit

-version
Display version information and exit

-machine [type=]name[,prop=value[,...]]
Select the emulated machine by name. Use "-machine help" to list available machines.
Supported machine properties are:

accel=accels1[:accels2[:...]]
This is used to enable an accelerator. Depending on the target architecture, kvm,
xen, or tcg can be available. By default, tcg is used. If there is more than one
accelerator specified, the next one is used if the previous one fails to
initialize.

kernel_irqchip=on|off
Enables in-kernel irqchip support for the chosen accelerator when available.

kvm_shadow_mem=size
Defines the size of the KVM shadow MMU.

dump-guest-core=on|off
Include guest memory in a core dump. The default is on.

mem-merge=on|off
Enables or disables memory merge support. This feature, when supported by the
host, de-duplicates identical memory pages among VMs instances (enabled by
default).

-cpu model
Select CPU model ("-cpu help" for list and additional feature selection)

-smp [cpus=]n[,cores=cores][,threads=threads][,sockets=sockets][,maxcpus=maxcpus]
Simulate an SMP system with n CPUs. On the PC target, up to 255 CPUs are supported. On
Sparc32 target, Linux limits the number of usable CPUs to 4. For the PC target, the
number of cores per socket, the number of threads per cores and the total number of
sockets can be specified. Missing values will be computed. If any on the three values
is given, the total number of CPUs n can be omitted. maxcpus specifies the maximum
number of hotpluggable CPUs.

-numa node[,mem=size][,cpus=cpu[-cpu]][,nodeid=node]
-numa node[,memdev=id][,cpus=cpu[-cpu]][,nodeid=node]
Simulate a multi node NUMA system. If mem, memdev and cpus are omitted, resources are
split equally. Also, note that the -numa option doesn't allocate any of the specified
resources. That is, it just assigns existing resources to NUMA nodes. This means that
one still has to use the -m, -smp options to allocate RAM and VCPUs respectively, and
possibly -object to specify the memory backend for the memdev suboption.

mem and memdev are mutually exclusive. Furthermore, if one node uses memdev, all of
them have to use it.

-add-fd fd=fd,set=set[,opaque=opaque]
Add a file descriptor to an fd set. Valid options are:

fd=fd
This option defines the file descriptor of which a duplicate is added to fd set.
The file descriptor cannot be stdin, stdout, or stderr.

set=set
This option defines the ID of the fd set to add the file descriptor to.

opaque=opaque
This option defines a free-form string that can be used to describe fd.

You can open an image using pre-opened file descriptors from an fd set:

qemu-system-i386
-add-fd fd=3,set=2,opaque="rdwr:/path/to/file"
-add-fd fd=4,set=2,opaque="rdonly:/path/to/file"
-drive file=/dev/fdset/2,index=0,media=disk

-set group.id.arg=value
Set parameter arg for item id of type group "

-global driver.prop=value
Set default value of driver's property prop to value, e.g.:

qemu-system-i386 -global ide-drive.physical_block_size=4096 -drive file=file,if=ide,index=0,media=disk

In particular, you can use this to set driver properties for devices which are created
automatically by the machine model. To create a device which is not created
automatically and set properties on it, use -device.

-boot
[order=drives][,once=drives][,menu=on|off][,splash=sp_name][,splash-time=sp_time][,reboot-timeout=rb_timeout][,strict=on|off]
Specify boot order drives as a string of drive letters. Valid drive letters depend on
the target achitecture. The x86 PC uses: a, b (floppy 1 and 2), c (first hard disk), d
(first CD-ROM), n-p (Etherboot from network adapter 1-4), hard disk boot is the
default. To apply a particular boot order only on the first startup, specify it via
once.

Interactive boot menus/prompts can be enabled via menu=on as far as firmware/BIOS
supports them. The default is non-interactive boot.

A splash picture could be passed to bios, enabling user to show it as logo, when
option splash=sp_name is given and menu=on, If firmware/BIOS supports them. Currently
Seabios for X86 system support it. limitation: The splash file could be a jpeg file
or a BMP file in 24 BPP format(true color). The resolution should be supported by the
SVGA mode, so the recommended is 320x240, 640x480, 800x640.

A timeout could be passed to bios, guest will pause for rb_timeout ms when boot
failed, then reboot. If rb_timeout is '-1', guest will not reboot, qemu passes '-1' to
bios by default. Currently Seabios for X86 system support it.

Do strict boot via strict=on as far as firmware/BIOS supports it. This only effects
when boot priority is changed by bootindex options. The default is non-strict boot.

# try to boot from network first, then from hard disk
qemu-system-i386 -boot order=nc
# boot from CD-ROM first, switch back to default order after reboot
qemu-system-i386 -boot once=d
# boot with a splash picture for 5 seconds.
qemu-system-i386 -boot menu=on,splash=/root/boot.bmp,splash-time=5000

Note: The legacy format '-boot drives' is still supported but its use is discouraged
as it may be removed from future versions.

-m [size=]megs
Set virtual RAM size to megs megabytes. Default is 128 MiB. Optionally, a suffix of
"M" or "G" can be used to signify a value in megabytes or gigabytes respectively.
Optional pair slots, maxmem could be used to set amount of hotluggable memory slots
and possible maximum amount of memory.

-mem-path path
Allocate guest RAM from a temporarily created file in path.

-mem-prealloc
Preallocate memory when using -mem-path.

-k language
Use keyboard layout language (for example "fr" for French). This option is only needed
where it is not easy to get raw PC keycodes (e.g. on Macs, with some X11 servers or
with a VNC display). You don't normally need to use it on PC/Linux or PC/Windows
hosts.

The available layouts are:

ar de-ch es fo fr-ca hu ja mk no pt-br sv
da en-gb et fr fr-ch is lt nl pl ru th
de en-us fi fr-be hr it lv nl-be pt sl tr

The default is "en-us".

-audio-help
Will show the audio subsystem help: list of drivers, tunable parameters.

-soundhw card1[,card2,...] or -soundhw all
Enable audio and selected sound hardware. Use 'help' to print all available sound
hardware.

qemu-system-i386 -soundhw sb16,adlib disk.img
qemu-system-i386 -soundhw es1370 disk.img
qemu-system-i386 -soundhw ac97 disk.img
qemu-system-i386 -soundhw hda disk.img
qemu-system-i386 -soundhw all disk.img
qemu-system-i386 -soundhw help

Note that Linux's i810_audio OSS kernel (for AC97) module might require manually
specifying clocking.

modprobe i810_audio clocking=48000

-balloon none
Disable balloon device.

-balloon virtio[,addr=addr]
Enable virtio balloon device (default), optionally with PCI address addr.

-device driver[,prop[=value][,...]]
Add device driver. prop=value sets driver properties. Valid properties depend on the
driver. To get help on possible drivers and properties, use "-device help" and
"-device driver,help".

-name name
Sets the name of the guest. This name will be displayed in the SDL window caption.
The name will also be used for the VNC server. Also optionally set the top visible
process name in Linux. Naming of individual threads can also be enabled on Linux to
aid debugging.

-uuid uuid
Set system UUID.

Block device options:

-fda file
-fdb file
Use file as floppy disk 0/1 image. You can use the host floppy by using /dev/fd0 as
filename.

-hda file
-hdb file
-hdc file
-hdd file
Use file as hard disk 0, 1, 2 or 3 image.

-cdrom file
Use file as CD-ROM image (you cannot use -hdc and -cdrom at the same time). You can
use the host CD-ROM by using /dev/cdrom as filename.

-drive option[,option[,option[,...]]]
Define a new drive. Valid options are:

file=file
This option defines which disk image to use with this drive. If the filename
contains comma, you must double it (for instance, "file=my,,file" to use file
"my,file").

Special files such as iSCSI devices can be specified using protocol specific URLs.
See the section for "Device URL Syntax" for more information.

if=interface
This option defines on which type on interface the drive is connected. Available
types are: ide, scsi, sd, mtd, floppy, pflash, virtio.

bus=bus,unit=unit
These options define where is connected the drive by defining the bus number and
the unit id.

index=index
This option defines where is connected the drive by using an index in the list of
available connectors of a given interface type.

media=media
This option defines the type of the media: disk or cdrom.

cyls=c,heads=h,secs=s[,trans=t]
These options have the same definition as they have in -hdachs.

snapshot=snapshot
snapshot is "on" or "off" and controls snapshot mode for the given drive (see
-snapshot).

cache=cache
cache is "none", "writeback", "unsafe", "directsync" or "writethrough" and
controls how the host cache is used to access block data.

aio=aio
aio is "threads", or "native" and selects between pthread based disk I/O and
native Linux AIO.

discard=discard
discard is one of "ignore" (or "off") or "unmap" (or "on") and controls whether
discard (also known as trim or unmap) requests are ignored or passed to the
filesystem. Some machine types may not support discard requests.

format=format
Specify which disk format will be used rather than detecting the format. Can be
used to specifiy format=raw to avoid interpreting an untrusted format header.

serial=serial
This option specifies the serial number to assign to the device.

addr=addr
Specify the controller's PCI address (if=virtio only).

werror=action,rerror=action
Specify which action to take on write and read errors. Valid actions are: "ignore"
(ignore the error and try to continue), "stop" (pause QEMU), "report" (report the
error to the guest), "enospc" (pause QEMU only if the host disk is full; report
the error to the guest otherwise). The default setting is werror=enospc and
rerror=report.

readonly
Open drive file as read-only. Guest write attempts will fail.

copy-on-read=copy-on-read
copy-on-read is "on" or "off" and enables whether to copy read backing file
sectors into the image file.

detect-zeroes=detect-zeroes
detect-zeroes is "off", "on" or "unmap" and enables the automatic conversion of
plain zero writes by the OS to driver specific optimized zero write commands. You
may even choose "unmap" if discard is set to "unmap" to allow a zero write to be
converted to an UNMAP operation.

By default, the cache=writeback mode is used. It will report data writes as completed
as soon as the data is present in the host page cache. This is safe as long as your
guest OS makes sure to correctly flush disk caches where needed. If your guest OS does
not handle volatile disk write caches correctly and your host crashes or loses power,
then the guest may experience data corruption.

For such guests, you should consider using cache=writethrough. This means that the
host page cache will be used to read and write data, but write notification will be
sent to the guest only after QEMU has made sure to flush each write to the disk. Be
aware that this has a major impact on performance.

The host page cache can be avoided entirely with cache=none. This will attempt to do
disk IO directly to the guest's memory. QEMU may still perform an internal copy of
the data. Note that this is considered a writeback mode and the guest OS must handle
the disk write cache correctly in order to avoid data corruption on host crashes.

The host page cache can be avoided while only sending write notifications to the guest
when the data has been flushed to the disk using cache=directsync.

In case you don't care about data integrity over host failures, use cache=unsafe. This
option tells QEMU that it never needs to write any data to the disk but can instead
keep things in cache. If anything goes wrong, like your host losing power, the disk
storage getting disconnected accidentally, etc. your image will most probably be
rendered unusable. When using the -snapshot option, unsafe caching is always used.

Copy-on-read avoids accessing the same backing file sectors repeatedly and is useful
when the backing file is over a slow network. By default copy-on-read is off.

Instead of -cdrom you can use:

qemu-system-i386 -drive file=file,index=2,media=cdrom

Instead of -hda, -hdb, -hdc, -hdd, you can use:

qemu-system-i386 -drive file=file,index=0,media=disk
qemu-system-i386 -drive file=file,index=1,media=disk
qemu-system-i386 -drive file=file,index=2,media=disk
qemu-system-i386 -drive file=file,index=3,media=disk

You can open an image using pre-opened file descriptors from an fd set:

qemu-system-i386
-add-fd fd=3,set=2,opaque="rdwr:/path/to/file"
-add-fd fd=4,set=2,opaque="rdonly:/path/to/file"
-drive file=/dev/fdset/2,index=0,media=disk

You can connect a CDROM to the slave of ide0:

qemu-system-i386 -drive file=file,if=ide,index=1,media=cdrom

If you don't specify the "file=" argument, you define an empty drive:

qemu-system-i386 -drive if=ide,index=1,media=cdrom

You can connect a SCSI disk with unit ID 6 on the bus #0:

qemu-system-i386 -drive file=file,if=scsi,bus=0,unit=6

Instead of -fda, -fdb, you can use:

qemu-system-i386 -drive file=file,index=0,if=floppy
qemu-system-i386 -drive file=file,index=1,if=floppy

By default, interface is "ide" and index is automatically incremented:

qemu-system-i386 -drive file=a -drive file=b"

is interpreted like:

qemu-system-i386 -hda a -hdb b

-mtdblock file
Use file as on-board Flash memory image.

-sd file
Use file as SecureDigital card image.

-pflash file
Use file as a parallel flash image.

-snapshot
Write to temporary files instead of disk image files. In this case, the raw disk image
you use is not written back. You can however force the write back by pressing C-a s.

-hdachs c,h,s,[,t]
Force hard disk 0 physical geometry (1 <= c <= 16383, 1 <= h <= 16, 1 <= s <= 63) and
optionally force the BIOS translation mode (t=none, lba or auto). Usually QEMU can
guess all those parameters. This option is useful for old MS-DOS disk images.

-fsdev
fsdriver,id=id,path=path,[security_model=security_model][,writeout=writeout][,readonly][,socket=socket|sock_fd=sock_fd]
Define a new file system device. Valid options are:

fsdriver
This option specifies the fs driver backend to use. Currently "local", "handle"
and "proxy" file system drivers are supported.

id=id
Specifies identifier for this device

path=path
Specifies the export path for the file system device. Files under this path will
be available to the 9p client on the guest.

security_model=security_model
Specifies the security model to be used for this export path. Supported security
models are "passthrough", "mapped-xattr", "mapped-file" and "none". In
"passthrough" security model, files are stored using the same credentials as they
are created on the guest. This requires QEMU to run as root. In "mapped-xattr"
security model, some of the file attributes like uid, gid, mode bits and link
target are stored as file attributes. For "mapped-file" these attributes are
stored in the hidden .virtfs_metadata directory. Directories exported by this
security model cannot interact with other unix tools. "none" security model is
same as passthrough except the sever won't report failures if it fails to set file
attributes like ownership. Security model is mandatory only for local fsdriver.
Other fsdrivers (like handle, proxy) don't take security model as a parameter.

writeout=writeout
This is an optional argument. The only supported value is "immediate". This means
that host page cache will be used to read and write data but write notification
will be sent to the guest only when the data has been reported as written by the
storage subsystem.

readonly
Enables exporting 9p share as a readonly mount for guests. By default read-write
access is given.

socket=socket
Enables proxy filesystem driver to use passed socket file for communicating with
virtfs-proxy-helper

sock_fd=sock_fd
Enables proxy filesystem driver to use passed socket descriptor for communicating
with virtfs-proxy-helper. Usually a helper like libvirt will create socketpair and
pass one of the fds as sock_fd

-fsdev option is used along with -device driver "virtio-9p-pci".

-device virtio-9p-pci,fsdev=id,mount_tag=mount_tag
Options for virtio-9p-pci driver are:

fsdev=id
Specifies the id value specified along with -fsdev option

mount_tag=mount_tag
Specifies the tag name to be used by the guest to mount this export point

-virtfs
fsdriver[,path=path],mount_tag=mount_tag[,security_model=security_model][,writeout=writeout][,readonly][,socket=socket|sock_fd=sock_fd]
The general form of a Virtual File system pass-through options are:

fsdriver
This option specifies the fs driver backend to use. Currently "local", "handle"
and "proxy" file system drivers are supported.

id=id
Specifies identifier for this device

path=path
Specifies the export path for the file system device. Files under this path will
be available to the 9p client on the guest.

readonly
Enables exporting 9p share as a readonly mount for guests. By default read-write
access is given.

socket=socket
Enables proxy filesystem driver to use passed socket file for communicating with
virtfs-proxy-helper. Usually a helper like libvirt will create socketpair and pass
one of the fds as sock_fd

sock_fd
Enables proxy filesystem driver to use passed 'sock_fd' as the socket descriptor
for interfacing with virtfs-proxy-helper

-virtfs_synth
Create synthetic file system image

USB options:

-usb
Enable the USB driver (will be the default soon)

-usbdevice devname
Add the USB device devname.

mouse
Virtual Mouse. This will override the PS/2 mouse emulation when activated.

tablet
Pointer device that uses absolute coordinates (like a touchscreen). This means
QEMU is able to report the mouse position without having to grab the mouse. Also
overrides the PS/2 mouse emulation when activated.

disk:[format=format]:file
Mass storage device based on file. The optional format argument will be used
rather than detecting the format. Can be used to specifiy "format=raw" to avoid
interpreting an untrusted format header.

host:bus.addr
Pass through the host device identified by bus.addr (Linux only).

host:vendor_id:product_id
Pass through the host device identified by vendor_id:product_id (Linux only).

serial:[vendorid=vendor_id][,productid=product_id]:dev
Serial converter to host character device dev, see "-serial" for the available
devices.

braille
Braille device. This will use BrlAPI to display the braille output on a real or
fake device.

net:options
Network adapter that supports CDC ethernet and RNDIS protocols.

Display options:

-display type
Select type of display to use. This option is a replacement for the old style
-sdl/-curses/... options. Valid values for type are

sdl Display video output via SDL (usually in a separate graphics window; see the SDL
documentation for other possibilities).

curses
Display video output via curses. For graphics device models which support a text
mode, QEMU can display this output using a curses/ncurses interface. Nothing is
displayed when the graphics device is in graphical mode or if the graphics device
does not support a text mode. Generally only the VGA device models support text
mode.

none
Do not display video output. The guest will still see an emulated graphics card,
but its output will not be displayed to the QEMU user. This option differs from
the -nographic option in that it only affects what is done with video output;
-nographic also changes the destination of the serial and parallel port data.

gtk Display video output in a GTK window. This interface provides drop-down menus and
other UI elements to configure and control the VM during runtime.

vnc Start a VNC server on display <arg>

-nographic
Normally, QEMU uses SDL to display the VGA output. With this option, you can totally
disable graphical output so that QEMU is a simple command line application. The
emulated serial port is redirected on the console and muxed with the monitor (unless
redirected elsewhere explicitly). Therefore, you can still use QEMU to debug a Linux
kernel with a serial console. Use C-a h for help on switching between the console and
monitor.

-curses
Normally, QEMU uses SDL to display the VGA output. With this option, QEMU can display
the VGA output when in text mode using a curses/ncurses interface. Nothing is
displayed in graphical mode.

-no-frame
Do not use decorations for SDL windows and start them using the whole available screen
space. This makes the using QEMU in a dedicated desktop workspace more convenient.

-alt-grab
Use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt). Note that this also affects
the special keys (for fullscreen, monitor-mode switching, etc).

-ctrl-grab
Use Right-Ctrl to grab mouse (instead of Ctrl-Alt). Note that this also affects the
special keys (for fullscreen, monitor-mode switching, etc).

-no-quit
Disable SDL window close capability.

-sdl
Enable SDL.

-spice option[,option[,...]]
Enable the spice remote desktop protocol. Valid options are

port=<nr>
Set the TCP port spice is listening on for plaintext channels.

addr=<addr>
Set the IP address spice is listening on. Default is any address.

ipv4
ipv6
Force using the specified IP version.

password=<secret>
Set the password you need to authenticate.

sasl
Require that the client use SASL to authenticate with the spice. The exact choice
of authentication method used is controlled from the system / user's SASL
configuration file for the 'qemu' service. This is typically found in
/etc/sasl2/qemu.conf. If running QEMU as an unprivileged user, an environment
variable SASL_CONF_PATH can be used to make it search alternate locations for the
service config. While some SASL auth methods can also provide data encryption (eg
GSSAPI), it is recommended that SASL always be combined with the 'tls' and 'x509'
settings to enable use of SSL and server certificates. This ensures a data
encryption preventing compromise of authentication credentials.

disable-ticketing
Allow client connects without authentication.

disable-copy-paste
Disable copy paste between the client and the guest.

disable-agent-file-xfer
Disable spice-vdagent based file-xfer between the client and the guest.

tls-port=<nr>
Set the TCP port spice is listening on for encrypted channels.

x509-dir=<dir>
Set the x509 file directory. Expects same filenames as -vnc $display,x509=$dir

x509-key-file=<file>
x509-key-password=<file>
x509-cert-file=<file>
x509-cacert-file=<file>
x509-dh-key-file=<file>
The x509 file names can also be configured individually.

tls-ciphers=<list>
Specify which ciphers to use.

jpeg-wan-compression=[auto|never|always]
zlib-glz-wan-compression=[auto|never|always]
Configure wan image compression (lossy for slow links). Default is auto.

streaming-video=[off|all|filter]
Configure video stream detection. Default is filter.

agent-mouse=[on|off]
Enable/disable passing mouse events via vdagent. Default is on.

playback-compression=[on|off]
Enable/disable audio stream compression (using celt 0.5.1). Default is on.

seamless-migration=[on|off]
Enable/disable spice seamless migration. Default is off.

-portrait
Rotate graphical output 90 deg left (only PXA LCD).

-rotate deg
Rotate graphical output some deg left (only PXA LCD).

-vga type
Select type of VGA card to emulate. Valid values for type are

cirrus
Cirrus Logic GD5446 Video card. All Windows versions starting from Windows 95
should recognize and use this graphic card. For optimal performances, use 16 bit
color depth in the guest and the host OS. (This one is the default)

std Standard VGA card with Bochs VBE extensions. If your guest OS supports the VESA
2.0 VBE extensions (e.g. Windows XP) and if you want to use high resolution modes
(>= 1280x1024x16) then you should use this option.

vmware
VMWare SVGA-II compatible adapter. Use it if you have sufficiently recent
XFree86/XOrg server or Windows guest with a driver for this card.

qxl QXL paravirtual graphic card. It is VGA compatible (including VESA 2.0 VBE
support). Works best with qxl guest drivers installed though. Recommended choice
when using the spice protocol.

tcx (sun4m only) Sun TCX framebuffer. This is the default framebuffer for sun4m
machines and offers both 8-bit and 24-bit colour depths at a fixed resolution of
1024x768.

cg3 (sun4m only) Sun cgthree framebuffer. This is a simple 8-bit framebuffer for sun4m
machines available in both 1024x768 (OpenBIOS) and 1152x900 (OBP) resolutions
aimed at people wishing to run older Solaris versions.

none
Disable VGA card.

-full-screen
Start in full screen.

-g widthxheight[xdepth]
Set the initial graphical resolution and depth (PPC, SPARC only).

-vnc display[,option[,option[,...]]]
Normally, QEMU uses SDL to display the VGA output. With this option, you can have
QEMU listen on VNC display display and redirect the VGA display over the VNC session.
It is very useful to enable the usb tablet device when using this option (option
-usbdevice tablet). When using the VNC display, you must use the -k parameter to set
the keyboard layout if you are not using en-us. Valid syntax for the display is

host:d
TCP connections will only be allowed from host on display d. By convention the
TCP port is 5900+d. Optionally, host can be omitted in which case the server will
accept connections from any host.

unix:path
Connections will be allowed over UNIX domain sockets where path is the location of
a unix socket to listen for connections on.

none
VNC is initialized but not started. The monitor "change" command can be used to
later start the VNC server.

Following the display value there may be one or more option flags separated by commas.
Valid options are

reverse
Connect to a listening VNC client via a "reverse" connection. The client is
specified by the display. For reverse network connections (host:d,"reverse"), the
d argument is a TCP port number, not a display number.

websocket
Opens an additional TCP listening port dedicated to VNC Websocket connections. By
definition the Websocket port is 5700+display. If host is specified connections
will only be allowed from this host. As an alternative the Websocket port could
be specified by using "websocket"=port. TLS encryption for the Websocket
connection is supported if the required certificates are specified with the VNC
option x509.

password
Require that password based authentication is used for client connections.

The password must be set separately using the "set_password" command in the
pcsys_monitor. The syntax to change your password is: "set_password <protocol>
<password>" where <protocol> could be either "vnc" or "spice".

If you would like to change <protocol> password expiration, you should use
"expire_password <protocol> <expiration-time>" where expiration time could be one
of the following options: now, never, +seconds or UNIX time of expiration, e.g.
+60 to make password expire in 60 seconds, or 1335196800 to make password expire
on "Mon Apr 23 12:00:00 EDT 2012" (UNIX time for this date and time).

You can also use keywords "now" or "never" for the expiration time to allow
<protocol> password to expire immediately or never expire.

tls Require that client use TLS when communicating with the VNC server. This uses
anonymous TLS credentials so is susceptible to a man-in-the-middle attack. It is
recommended that this option be combined with either the x509 or x509verify
options.

x509=/path/to/certificate/dir
Valid if tls is specified. Require that x509 credentials are used for negotiating
the TLS session. The server will send its x509 certificate to the client. It is
recommended that a password be set on the VNC server to provide authentication of
the client when this is used. The path following this option specifies where the
x509 certificates are to be loaded from. See the vnc_security section for details
on generating certificates.

x509verify=/path/to/certificate/dir
Valid if tls is specified. Require that x509 credentials are used for negotiating
the TLS session. The server will send its x509 certificate to the client, and
request that the client send its own x509 certificate. The server will validate
the client's certificate against the CA certificate, and reject clients when
validation fails. If the certificate authority is trusted, this is a sufficient
authentication mechanism. You may still wish to set a password on the VNC server
as a second authentication layer. The path following this option specifies where
the x509 certificates are to be loaded from. See the vnc_security section for
details on generating certificates.

sasl
Require that the client use SASL to authenticate with the VNC server. The exact
choice of authentication method used is controlled from the system / user's SASL
configuration file for the 'qemu' service. This is typically found in
/etc/sasl2/qemu.conf. If running QEMU as an unprivileged user, an environment
variable SASL_CONF_PATH can be used to make it search alternate locations for the
service config. While some SASL auth methods can also provide data encryption (eg
GSSAPI), it is recommended that SASL always be combined with the 'tls' and 'x509'
settings to enable use of SSL and server certificates. This ensures a data
encryption preventing compromise of authentication credentials. See the
vnc_security section for details on using SASL authentication.

acl Turn on access control lists for checking of the x509 client certificate and SASL
party. For x509 certs, the ACL check is made against the certificate's
distinguished name. This is something that looks like
"C=GB,O=ACME,L=Boston,CN=bob". For SASL party, the ACL check is made against the
username, which depending on the SASL plugin, may include a realm component, eg
"bob" or "bob AT EXAMPLE.COM". When the acl flag is set, the initial access list
will be empty, with a "deny" policy. Thus no one will be allowed to use the VNC
server until the ACLs have been loaded. This can be achieved using the "acl"
monitor command.

lossy
Enable lossy compression methods (gradient, JPEG, ...). If this option is set, VNC
client may receive lossy framebuffer updates depending on its encoding settings.
Enabling this option can save a lot of bandwidth at the expense of quality.

non-adaptive
Disable adaptive encodings. Adaptive encodings are enabled by default. An
adaptive encoding will try to detect frequently updated screen regions, and send
updates in these regions using a lossy encoding (like JPEG). This can be really
helpful to save bandwidth when playing videos. Disabling adaptive encodings
restores the original static behavior of encodings like Tight.

share=[allow-exclusive|force-shared|ignore]
Set display sharing policy. 'allow-exclusive' allows clients to ask for exclusive
access. As suggested by the rfb spec this is implemented by dropping other
connections. Connecting multiple clients in parallel requires all clients asking
for a shared session (vncviewer: -shared switch). This is the default.
'force-shared' disables exclusive client access. Useful for shared desktop
sessions, where you don't want someone forgetting specify -shared disconnect
everybody else. 'ignore' completely ignores the shared flag and allows everybody
connect unconditionally. Doesn't conform to the rfb spec but is traditional QEMU
behavior.

i386 target only:

-win2k-hack
Use it when installing Windows 2000 to avoid a disk full bug. After Windows 2000 is
installed, you no longer need this option (this option slows down the IDE transfers).

-no-fd-bootchk
Disable boot signature checking for floppy disks in BIOS. May be needed to boot from
old floppy disks.

-no-acpi
Disable ACPI (Advanced Configuration and Power Interface) support. Use it if your
guest OS complains about ACPI problems (PC target machine only).

-no-hpet
Disable HPET support.

-acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n]
[,asl_compiler_id=str][,asl_compiler_rev=n][,data=file1[:file2]...]
Add ACPI table with specified header fields and context from specified files. For
file=, take whole ACPI table from the specified files, including all ACPI headers
(possible overridden by other options). For data=, only data portion of the table is
used, all header information is specified in the command line. If a SLIC table is
supplied to qemu, then the oem_id from the SLIC table will be copied into the RSDT
table (this is a Debian addition).

-smbios file=binary
Load SMBIOS entry from binary file.

-smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d][,uefi=on|off]
Specify SMBIOS type 0 fields

-smbios type=1[,manufacturer=str][,product=str]
[,version=str][,serial=str][,uuid=uuid][,sku=str] [,family=str]
Specify SMBIOS type 1 fields

Network options:

-net nic[,vlan=n][,macaddr=mac][,model=type] [,name=name][,addr=addr][,vectors=v]
Create a new Network Interface Card and connect it to VLAN n (n = 0 is the default).
The NIC is an e1000 by default on the PC target. Optionally, the MAC address can be
changed to mac, the device address set to addr (PCI cards only), and a name can be
assigned for use in monitor commands. Optionally, for PCI cards, you can specify the
number v of MSI-X vectors that the card should have; this option currently only
affects virtio cards; set v = 0 to disable MSI-X. If no -net option is specified, a
single NIC is created. QEMU can emulate several different models of network card.
Valid values for type are "virtio", "i82551", "i82557b", "i82559er", "ne2k_pci",
"ne2k_isa", "pcnet", "rtl8139", "e1000", "smc91c111", "lance" and "mcf_fec". Not all
devices are supported on all targets. Use "-net nic,model=help" for a list of
available devices for your target.

-netdev user,id=id[,option][,option][,...]
-net user[,option][,option][,...]
Use the user mode network stack which requires no administrator privilege to run.
Valid options are:

vlan=n
Connect user mode stack to VLAN n (n = 0 is the default).

id=id
name=name
Assign symbolic name for use in monitor commands.

net=addr[/mask]
Set IP network address the guest will see. Optionally specify the netmask, either
in the form a.b.c.d or as number of valid top-most bits. Default is 10.0.2.0/24.

host=addr
Specify the guest-visible address of the host. Default is the 2nd IP in the guest
network, i.e. x.x.x.2.

restrict=on|off
If this option is enabled, the guest will be isolated, i.e. it will not be able to
contact the host and no guest IP packets will be routed over the host to the
outside. This option does not affect any explicitly set forwarding rules.

hostname=name
Specifies the client hostname reported by the built-in DHCP server.

dhcpstart=addr
Specify the first of the 16 IPs the built-in DHCP server can assign. Default is
the 15th to 31st IP in the guest network, i.e. x.x.x.15 to x.x.x.31.

dns=addr
Specify the guest-visible address of the virtual nameserver. The address must be
different from the host address. Default is the 3rd IP in the guest network, i.e.
x.x.x.3.

dnssearch=domain
Provides an entry for the domain-search list sent by the built-in DHCP server.
More than one domain suffix can be transmitted by specifying this option multiple
times. If supported, this will cause the guest to automatically try to append the
given domain suffix(es) in case a domain name can not be resolved.

Example:

qemu -net user,dnssearch=mgmt.example.org,dnssearch=example.org [...]

tftp=dir
When using the user mode network stack, activate a built-in TFTP server. The files
in dir will be exposed as the root of a TFTP server. The TFTP client on the guest
must be configured in binary mode (use the command "bin" of the Unix TFTP client).

bootfile=file
When using the user mode network stack, broadcast file as the BOOTP filename. In
conjunction with tftp, this can be used to network boot a guest from a local
directory.

Example (using pxelinux):

qemu-system-i386 -hda linux.img -boot n -net user,tftp=/path/to/tftp/files,bootfile=/pxelinux.0

smb=dir[,smbserver=addr]
When using the user mode network stack, activate a built-in SMB server so that
Windows OSes can access to the host files in dir transparently. The IP address of
the SMB server can be set to addr. By default the 4th IP in the guest network is
used, i.e. x.x.x.4.

In the guest Windows OS, the line:

10.0.2.4 smbserver

must be added in the file C:\WINDOWS\LMHOSTS (for windows 9x/Me) or
C:\WINNT\SYSTEM32\DRIVERS\ETC\LMHOSTS (Windows NT/2000).

Then dir can be accessed in \smbserver\qemu.

Note that a SAMBA server must be installed on the host OS. QEMU was tested
successfully with smbd versions from Red Hat 9, Fedora Core 3 and OpenSUSE 11.x.

hostfwd=[tcp|udp]:[hostaddr]:hostport-[guestaddr]:guestport
Redirect incoming TCP or UDP connections to the host port hostport to the guest IP
address guestaddr on guest port guestport. If guestaddr is not specified, its
value is x.x.x.15 (default first address given by the built-in DHCP server). By
specifying hostaddr, the rule can be bound to a specific host interface. If no
connection type is set, TCP is used. This option can be given multiple times.

For example, to redirect host X11 connection from screen 1 to guest screen 0, use
the following:

# on the host
qemu-system-i386 -net user,hostfwd=tcp:127.0.0.1:6001-:6000 [...]
# this host xterm should open in the guest X11 server
xterm -display :1

To redirect telnet connections from host port 5555 to telnet port on the guest,
use the following:

# on the host
qemu-system-i386 -net user,hostfwd=tcp::5555-:23 [...]
telnet localhost 5555

Then when you use on the host "telnet localhost 5555", you connect to the guest
telnet server.

guestfwd=[tcp]:server:port-dev
guestfwd=[tcp]:server:port-cmd:command
Forward guest TCP connections to the IP address server on port port to the
character device dev or to a program executed by cmd:command which gets spawned
for each connection. This option can be given multiple times.

You can either use a chardev directly and have that one used throughout QEMU's
lifetime, like in the following example:

# open 10.10.1.1:4321 on bootup, connect 10.0.2.100:1234 to it whenever
# the guest accesses it
qemu -net user,guestfwd=tcp:10.0.2.100:1234-tcp:10.10.1.1:4321 [...]

Or you can execute a command on every TCP connection established by the guest, so
that QEMU behaves similar to an inetd process for that virtual server:

# call "netcat 10.10.1.1 4321" on every TCP connection to 10.0.2.100:1234
# and connect the TCP stream to its stdin/stdout
qemu -net 'user,guestfwd=tcp:10.0.2.100:1234-cmd:netcat 10.10.1.1 4321'

Note: Legacy stand-alone options -tftp, -bootp, -smb and -redir are still processed
and applied to -net user. Mixing them with the new configuration syntax gives
undefined results. Their use for new applications is discouraged as they will be
removed from future versions.

-netdev tap,id=id[,fd=h][,ifname=name][,script=file][,downscript=dfile][,helper=helper]
-net
tap[,vlan=n][,name=name][,fd=h][,ifname=name][,script=file][,downscript=dfile][,helper=helper]
Connect the host TAP network interface name to VLAN n.

Use the network script file to configure it and the network script dfile to
deconfigure it. If name is not provided, the OS automatically provides one. The
default network configure script is /etc/qemu-ifup and the default network deconfigure
script is /etc/qemu-ifdown. Use script=no or downscript=no to disable script
execution.

If running QEMU as an unprivileged user, use the network helper helper to configure
the TAP interface. The default network helper executable is
/path/to/qemu-bridge-helper.

fd=h can be used to specify the handle of an already opened host TAP interface.

Examples:

#launch a QEMU instance with the default network script
qemu-system-i386 linux.img -net nic -net tap

#launch a QEMU instance with two NICs, each one connected
#to a TAP device
qemu-system-i386 linux.img \
-net nic,vlan=0 -net tap,vlan=0,ifname=tap0 \
-net nic,vlan=1 -net tap,vlan=1,ifname=tap1

#launch a QEMU instance with the default network helper to
#connect a TAP device to bridge br0
qemu-system-i386 linux.img \
-net nic -net tap,"helper=/path/to/qemu-bridge-helper"

-netdev bridge,id=id[,br=bridge][,helper=helper]
-net bridge[,vlan=n][,name=name][,br=bridge][,helper=helper]
Connect a host TAP network interface to a host bridge device.

Use the network helper helper to configure the TAP interface and attach it to the
bridge. The default network helper executable is /path/to/qemu-bridge-helper and the
default bridge device is br0.

Examples:

#launch a QEMU instance with the default network helper to
#connect a TAP device to bridge br0
qemu-system-i386 linux.img -net bridge -net nic,model=virtio

#launch a QEMU instance with the default network helper to
#connect a TAP device to bridge qemubr0
qemu-system-i386 linux.img -net bridge,br=qemubr0 -net nic,model=virtio

-netdev socket,id=id[,fd=h][,listen=[host]:port][,connect=host:port]
-net socket[,vlan=n][,name=name][,fd=h] [,listen=[host]:port][,connect=host:port]
Connect the VLAN n to a remote VLAN in another QEMU virtual machine using a TCP socket
connection. If listen is specified, QEMU waits for incoming connections on port (host
is optional). connect is used to connect to another QEMU instance using the listen
option. fd=h specifies an already opened TCP socket.

Example:

# launch a first QEMU instance
qemu-system-i386 linux.img \
-net nic,macaddr=52:54:00:12:34:56 \
-net socket,listen=:1234
# connect the VLAN 0 of this instance to the VLAN 0
# of the first instance
qemu-system-i386 linux.img \
-net nic,macaddr=52:54:00:12:34:57 \
-net socket,connect=127.0.0.1:1234

-netdev socket,id=id[,fd=h][,mcast=maddr:port[,localaddr=addr]]
-net socket[,vlan=n][,name=name][,fd=h][,mcast=maddr:port[,localaddr=addr]]
Create a VLAN n shared with another QEMU virtual machines using a UDP multicast
socket, effectively making a bus for every QEMU with same multicast address maddr and
port. NOTES:

1. Several QEMU can be running on different hosts and share same bus (assuming
correct multicast setup for these hosts).

2. mcast support is compatible with User Mode Linux (argument ethN=mcast), see
<http://user-mode-linux.sf.net>.

3. Use fd=h to specify an already opened UDP multicast socket.

Example:

# launch one QEMU instance
qemu-system-i386 linux.img \
-net nic,macaddr=52:54:00:12:34:56 \
-net socket,mcast=230.0.0.1:1234
# launch another QEMU instance on same "bus"
qemu-system-i386 linux.img \
-net nic,macaddr=52:54:00:12:34:57 \
-net socket,mcast=230.0.0.1:1234
# launch yet another QEMU instance on same "bus"
qemu-system-i386 linux.img \
-net nic,macaddr=52:54:00:12:34:58 \
-net socket,mcast=230.0.0.1:1234

Example (User Mode Linux compat.):

# launch QEMU instance (note mcast address selected
# is UML's default)
qemu-system-i386 linux.img \
-net nic,macaddr=52:54:00:12:34:56 \
-net socket,mcast=239.192.168.1:1102
# launch UML
/path/to/linux ubd0=/path/to/root_fs eth0=mcast

Example (send packets from host's 1.2.3.4):

qemu-system-i386 linux.img \
-net nic,macaddr=52:54:00:12:34:56 \
-net socket,mcast=239.192.168.1:1102,localaddr=1.2.3.4

-netdev
l2tpv3,id=id,src=srcaddr,dst=dstaddr[,srcport=srcport][,dstport=dstport],txsession=txsession[,rxsession=rxsession][,ipv6][,udp][,cookie64][,counter][,pincounter][,txcookie=txcookie][,rxcookie=rxcookie][,offset=offset]
-net
l2tpv3[,vlan=n][,name=name],src=srcaddr,dst=dstaddr[,srcport=srcport][,dstport=dstport],txsession=txsession[,rxsession=rxsession][,ipv6][,udp][,cookie64][,counter][,pincounter][,txcookie=txcookie][,rxcookie=rxcookie][,offset=offset]
Connect VLAN n to L2TPv3 pseudowire. L2TPv3 (RFC3391) is a popular protocol to
transport Ethernet (and other Layer 2) data frames between two systems. It is present
in routers, firewalls and the Linux kernel (from version 3.3 onwards).

This transport allows a VM to communicate to another VM, router or firewall directly.

src=srcaddr
source address (mandatory)

dst=dstaddr
destination address (mandatory)

udp select udp encapsulation (default is ip).

srcport=srcport
source udp port.

dstport=dstport
destination udp port.

ipv6
force v6, otherwise defaults to v4.

rxcookie=rxcookie
txcookie=txcookie
Cookies are a weak form of security in the l2tpv3 specification. Their function is
mostly to prevent misconfiguration. By default they are 32 bit.

cookie64
Set cookie size to 64 bit instead of the default 32

counter=off
Force a 'cut-down' L2TPv3 with no counter as in
draft-mkonstan-l2tpext-keyed-ipv6-tunnel-00

pincounter=on
Work around broken counter handling in peer. This may also help on networks which have
packet reorder.

offset=offset
Add an extra offset between header and data

For example, to attach a VM running on host 4.3.2.1 via L2TPv3 to the bridge br-lan on
the remote Linux host 1.2.3.4:

# Setup tunnel on linux host using raw ip as encapsulation
# on 1.2.3.4
ip l2tp add tunnel remote 4.3.2.1 local 1.2.3.4 tunnel_id 1 peer_tunnel_id 1 \
encap udp udp_sport 16384 udp_dport 16384
ip l2tp add session tunnel_id 1 name vmtunnel0 session_id \
0xFFFFFFFF peer_session_id 0xFFFFFFFF
ifconfig vmtunnel0 mtu 1500
ifconfig vmtunnel0 up
brctl addif br-lan vmtunnel0

# on 4.3.2.1
# launch QEMU instance - if your network has reorder or is very lossy add ,pincounter

qemu-system-i386 linux.img -net nic -net l2tpv3,src=4.2.3.1,dst=1.2.3.4,udp,srcport=16384,dstport=16384,rxsession=0xffffffff,txsession=0xffffffff,counter

-netdev vde,id=id[,sock=socketpath][,port=n][,group=groupname][,mode=octalmode]
-net vde[,vlan=n][,name=name][,sock=socketpath]
[,port=n][,group=groupname][,mode=octalmode]
Connect VLAN n to PORT n of a vde switch running on host and listening for incoming
connections on socketpath. Use GROUP groupname and MODE octalmode to change default
ownership and permissions for communication port. This option is only available if
QEMU has been compiled with vde support enabled.

Example:

# launch vde switch
vde_switch -F -sock /tmp/myswitch
# launch QEMU instance
qemu-system-i386 linux.img -net nic -net vde,sock=/tmp/myswitch

-netdev hubport,id=id,hubid=hubid
Create a hub port on QEMU "vlan" hubid.

The hubport netdev lets you connect a NIC to a QEMU "vlan" instead of a single netdev.
"-net" and "-device" with parameter vlan create the required hub automatically.

-netdev vhost-user,chardev=id[,vhostforce=on|off]
Establish a vhost-user netdev, backed by a chardev id. The chardev should be a unix
domain socket backed one. The vhost-user uses a specifically defined protocol to pass
vhost ioctl replacement messages to an application on the other end of the socket. On
non-MSIX guests, the feature can be forced with vhostforce.

Example:

qemu -m 512 -object memory-backend-file,id=mem,size=512M,mem-path=/hugetlbfs,share=on \
-numa node,memdev=mem \
-chardev socket,path=/path/to/socket \
-netdev type=vhost-user,id=net0,chardev=chr0 \
-device virtio-net-pci,netdev=net0

-net dump[,vlan=n][,file=file][,len=len]
Dump network traffic on VLAN n to file file (qemu-vlan0.pcap by default). At most len
bytes (64k by default) per packet are stored. The file format is libpcap, so it can be
analyzed with tools such as tcpdump or Wireshark.

-net none
Indicate that no network devices should be configured. It is used to override the
default configuration (-net nic -net user) which is activated if no -net options are
provided.

Character device options:

The general form of a character device option is:

-chardev backend ,id=id [,mux=on|off] [,options]
Backend is one of: null, socket, udp, msmouse, vc, ringbuf, file, pipe, console,
serial, pty, stdio, braille, tty, parallel, parport, spicevmc. spiceport. The
specific backend will determine the applicable options.

All devices must have an id, which can be any string up to 127 characters long. It is
used to uniquely identify this device in other command line directives.

A character device may be used in multiplexing mode by multiple front-ends. The key
sequence of Control-a and c will rotate the input focus between attached front-ends.
Specify mux=on to enable this mode.

Options to each backend are described below.

-chardev null ,id=id
A void device. This device will not emit any data, and will drop any data it receives.
The null backend does not take any options.

-chardev socket ,id=id [TCP options or unix options] [,server] [,nowait] [,telnet]
Create a two-way stream socket, which can be either a TCP or a unix socket. A unix
socket will be created if path is specified. Behaviour is undefined if TCP options are
specified for a unix socket.

server specifies that the socket shall be a listening socket.

nowait specifies that QEMU should not block waiting for a client to connect to a
listening socket.

telnet specifies that traffic on the socket should interpret telnet escape sequences.

TCP and unix socket options are given below:

TCP options: port=port [,host=host] [,to=to] [,ipv4] [,ipv6] [,nodelay]
host for a listening socket specifies the local address to be bound. For a
connecting socket species the remote host to connect to. host is optional for
listening sockets. If not specified it defaults to 0.0.0.0.

port for a listening socket specifies the local port to be bound. For a connecting
socket specifies the port on the remote host to connect to. port can be given as
either a port number or a service name. port is required.

to is only relevant to listening sockets. If it is specified, and port cannot be
bound, QEMU will attempt to bind to subsequent ports up to and including to until
it succeeds. to must be specified as a port number.

ipv4 and ipv6 specify that either IPv4 or IPv6 must be used. If neither is
specified the socket may use either protocol.

nodelay disables the Nagle algorithm.

unix options: path=path
path specifies the local path of the unix socket. path is required.

-chardev udp ,id=id [,host=host] ,port=port [,localaddr=localaddr] [,localport=localport]
[,ipv4] [,ipv6]
Sends all traffic from the guest to a remote host over UDP.

host specifies the remote host to connect to. If not specified it defaults to
"localhost".

port specifies the port on the remote host to connect to. port is required.

localaddr specifies the local address to bind to. If not specified it defaults to
0.0.0.0.

localport specifies the local port to bind to. If not specified any available local
port will be used.

ipv4 and ipv6 specify that either IPv4 or IPv6 must be used. If neither is specified
the device may use either protocol.

-chardev msmouse ,id=id
Forward QEMU's emulated msmouse events to the guest. msmouse does not take any
options.

-chardev vc ,id=id [[,width=width] [,height=height]] [[,cols=cols] [,rows=rows]]
Connect to a QEMU text console. vc may optionally be given a specific size.

width and height specify the width and height respectively of the console, in pixels.

cols and rows specify that the console be sized to fit a text console with the given
dimensions.

-chardev ringbuf ,id=id [,size=size]
Create a ring buffer with fixed size size. size must be a power of two, and defaults
to "64K").

-chardev file ,id=id ,path=path
Log all traffic received from the guest to a file.

path specifies the path of the file to be opened. This file will be created if it does
not already exist, and overwritten if it does. path is required.

-chardev pipe ,id=id ,path=path
Create a two-way connection to the guest. The behaviour differs slightly between
Windows hosts and other hosts:

On Windows, a single duplex pipe will be created at \.pipe\path.

On other hosts, 2 pipes will be created called path.in and path.out. Data written to
path.in will be received by the guest. Data written by the guest can be read from
path.out. QEMU will not create these fifos, and requires them to be present.

path forms part of the pipe path as described above. path is required.

-chardev console ,id=id
Send traffic from the guest to QEMU's standard output. console does not take any
options.

console is only available on Windows hosts.

-chardev serial ,id=id ,path=path
Send traffic from the guest to a serial device on the host.

On Unix hosts serial will actually accept any tty device, not only serial lines.

path specifies the name of the serial device to open.

-chardev pty ,id=id
Create a new pseudo-terminal on the host and connect to it. pty does not take any
options.

pty is not available on Windows hosts.

-chardev stdio ,id=id [,signal=on|off]
Connect to standard input and standard output of the QEMU process.

signal controls if signals are enabled on the terminal, that includes exiting QEMU
with the key sequence Control-c. This option is enabled by default, use signal=off to
disable it.

stdio is not available on Windows hosts.

-chardev braille ,id=id
Connect to a local BrlAPI server. braille does not take any options.

-chardev tty ,id=id ,path=path
tty is only available on Linux, Sun, FreeBSD, NetBSD, OpenBSD and DragonFlyBSD hosts.
It is an alias for serial.

path specifies the path to the tty. path is required.

-chardev parallel ,id=id ,path=path
-chardev parport ,id=id ,path=path
parallel is only available on Linux, FreeBSD and DragonFlyBSD hosts.

Connect to a local parallel port.

path specifies the path to the parallel port device. path is required.

-chardev spicevmc ,id=id ,debug=debug, name=name
spicevmc is only available when spice support is built in.

debug debug level for spicevmc

name name of spice channel to connect to

Connect to a spice virtual machine channel, such as vdiport.

-chardev spiceport ,id=id ,debug=debug, name=name
spiceport is only available when spice support is built in.

debug debug level for spicevmc

name name of spice port to connect to

Connect to a spice port, allowing a Spice client to handle the traffic identified by a
name (preferably a fqdn).

Device URL Syntax:

In addition to using normal file images for the emulated storage devices, QEMU can also
use networked resources such as iSCSI devices. These are specified using a special URL
syntax.

iSCSI
iSCSI support allows QEMU to access iSCSI resources directly and use as images for the
guest storage. Both disk and cdrom images are supported.

Syntax for specifying iSCSI LUNs is "iscsi://<target-ip>[:<port>]/<target-iqn>/<lun>"

By default qemu will use the iSCSI initiator-name 'iqn.2008-11.org.linux-kvm[:<name>]'
but this can also be set from the command line or a configuration file.

Example (without authentication):

qemu-system-i386 -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \
-cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \
-drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1

Example (CHAP username/password via URL):

qemu-system-i386 -drive file=iscsi://user%password AT 192.1/iqn.2001-04.com.example/1

Example (CHAP username/password via environment variables):

LIBISCSI_CHAP_USERNAME="user" \
LIBISCSI_CHAP_PASSWORD="password" \
qemu-system-i386 -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1

iSCSI support is an optional feature of QEMU and only available when compiled and
linked against libiscsi.

iSCSI parameters such as username and password can also be specified via a
configuration file. See qemu-doc for more information and examples.

NBD QEMU supports NBD (Network Block Devices) both using TCP protocol as well as Unix
Domain Sockets.

Syntax for specifying a NBD device using TCP
"nbd:<server-ip>:<port>[:exportname=<export>]"

Syntax for specifying a NBD device using Unix Domain Sockets
"nbd:unix:<domain-socket>[:exportname=<export>]"

Example for TCP

qemu-system-i386 --drive file=nbd:192.0.2.1:30000

Example for Unix Domain Sockets

qemu-system-i386 --drive file=nbd:unix:/tmp/nbd-socket

SSH QEMU supports SSH (Secure Shell) access to remote disks.

Examples:

qemu-system-i386 -drive file=ssh://user@host/path/to/disk.img
qemu-system-i386 -drive file.driver=ssh,file.user=user,file.host=host,file.port=22,file.path=/path/to/disk.img

Currently authentication must be done using ssh-agent. Other authentication methods
may be supported in future.

Sheepdog
Sheepdog is a distributed storage system for QEMU. QEMU supports using either local
sheepdog devices or remote networked devices.

Syntax for specifying a sheepdog device

sheepdog[+tcp|+unix]://[host:port]/vdiname[?socket=path][#snapid|#tag]

Example

qemu-system-i386 --drive file=sheepdog://192.0.2.1:30000/MyVirtualMachine

See also <http://http://www.osrg.net/sheepdog/>.

GlusterFS
GlusterFS is an user space distributed file system. QEMU supports the use of
GlusterFS volumes for hosting VM disk images using TCP, Unix Domain Sockets and RDMA
transport protocols.

Syntax for specifying a VM disk image on GlusterFS volume is

gluster[+transport]://[server[:port]]/volname/image[?socket=...]

Example

qemu-system-x86_64 --drive file=gluster://192.0.2.1/testvol/a.img

See also <http://www.gluster.org>.

HTTP/HTTPS/FTP/FTPS/TFTP
QEMU supports read-only access to files accessed over http(s), ftp(s) and tftp.

Syntax using a single filename:

where:

protocol
'http', 'https', 'ftp', 'ftps', or 'tftp'.

username
Optional username for authentication to the remote server.

password
Optional password for authentication to the remote server.

host
Address of the remote server.

path
Path on the remote server, including any query string.

The following options are also supported:

url The full URL when passing options to the driver explicitly.

readahead
The amount of data to read ahead with each range request to the remote server.
This value may optionally have the suffix 'T', 'G', 'M', 'K', 'k' or 'b'. If it
does not have a suffix, it will be assumed to be in bytes. The value must be a
multiple of 512 bytes. It defaults to 256k.

sslverify
Whether to verify the remote server's certificate when connecting over SSL. It can
have the value 'on' or 'off'. It defaults to 'on'.

Note that when passing options to qemu explicitly, driver is the value of <protocol>.

Example: boot from a remote Fedora 20 live ISO image

qemu-system-x86_64 --drive media=cdrom,file=http://dl.fedoraproject.org/pub/fedora/linux/releases/20/Live/x86_64/Fedora-Live-Desktop-x86_64-20-1.iso,readonly

qemu-system-x86_64 --drive media=cdrom,file.driver=http,file.url=http://dl.fedoraproject.org/pub/fedora/linux/releases/20/Live/x86_64/Fedora-Live-Desktop-x86_64-20-1.iso,readonly

Example: boot from a remote Fedora 20 cloud image using a local overlay for writes,
copy-on-read, and a readahead of 64k

qemu-img create -f qcow2 -o backing_file='json:{"file.driver":"http",, "file.url":"https://dl.fedoraproject.org/pub/fedora/linux/releases/20/Images/x86_64/Fedora-x86_64-20-20131211.1-sda.qcow2",, "file.readahead":"64k"}' /tmp/Fedora-x86_64-20-20131211.1-sda.qcow2

qemu-system-x86_64 -drive file=/tmp/Fedora-x86_64-20-20131211.1-sda.qcow2,copy-on-read=on

Example: boot from an image stored on a VMware vSphere server with a self-signed
certificate using a local overlay for writes and a readahead of 64k

qemu-img create -f qcow2 -o backing_file='json:{"file.driver":"https",, "file.url":"https://user:password AT vsphere.com/folder/test/test-flat.vmdk?dcPath=Datacenter&dsName=datastore1",, "file.sslverify":"off",, "file.readahead":"64k"}' /tmp/test.qcow2

qemu-system-x86_64 -drive file=/tmp/test.qcow2

Bluetooth(R) options:

-bt hci[...]
Defines the function of the corresponding Bluetooth HCI. -bt options are matched with
the HCIs present in the chosen machine type. For example when emulating a machine
with only one HCI built into it, only the first "-bt hci[...]" option is valid and
defines the HCI's logic. The Transport Layer is decided by the machine type.
Currently the machines "n800" and "n810" have one HCI and all other machines have
none.

The following three types are recognized:

-bt hci,null
(default) The corresponding Bluetooth HCI assumes no internal logic and will not
respond to any HCI commands or emit events.

-bt hci,host[:id]
("bluez" only) The corresponding HCI passes commands / events to / from the
physical HCI identified by the name id (default: "hci0") on the computer running
QEMU. Only available on "bluez" capable systems like Linux.

-bt hci[,vlan=n]
Add a virtual, standard HCI that will participate in the Bluetooth scatternet n
(default 0). Similarly to -net VLANs, devices inside a bluetooth network n can
only communicate with other devices in the same network (scatternet).

-bt vhci[,vlan=n]
(Linux-host only) Create a HCI in scatternet n (default 0) attached to the host
bluetooth stack instead of to the emulated target. This allows the host and target
machines to participate in a common scatternet and communicate. Requires the Linux
"vhci" driver installed. Can be used as following:

qemu-system-i386 [...OPTIONS...] -bt hci,vlan=5 -bt vhci,vlan=5

-bt device:dev[,vlan=n]
Emulate a bluetooth device dev and place it in network n (default 0). QEMU can only
emulate one type of bluetooth devices currently:

keyboard
Virtual wireless keyboard implementing the HIDP bluetooth profile.

TPM device options:

The general form of a TPM device option is:

-tpmdev backend ,id=id [,options]
Backend type must be: passthrough.

The specific backend type will determine the applicable options. The "-tpmdev" option
creates the TPM backend and requires a "-device" option that specifies the TPM
frontend interface model.

Options to each backend are described below.

Use 'help' to print all available TPM backend types.

qemu -tpmdev help

-tpmdev passthrough, id=id, path=path, cancel-path=cancel-path
(Linux-host only) Enable access to the host's TPM using the passthrough driver.

path specifies the path to the host's TPM device, i.e., on a Linux host this would be
"/dev/tpm0". path is optional and by default "/dev/tpm0" is used.

cancel-path specifies the path to the host TPM device's sysfs entry allowing for
cancellation of an ongoing TPM command. cancel-path is optional and by default QEMU
will search for the sysfs entry to use.

Some notes about using the host's TPM with the passthrough driver:

The TPM device accessed by the passthrough driver must not be used by any other
application on the host.

Since the host's firmware (BIOS/UEFI) has already initialized the TPM, the VM's
firmware (BIOS/UEFI) will not be able to initialize the TPM again and may therefore
not show a TPM-specific menu that would otherwise allow the user to configure the TPM,
e.g., allow the user to enable/disable or activate/deactivate the TPM. Further, if
TPM ownership is released from within a VM then the host's TPM will get disabled and
deactivated. To enable and activate the TPM again afterwards, the host has to be
rebooted and the user is required to enter the firmware's menu to enable and activate
the TPM. If the TPM is left disabled and/or deactivated most TPM commands will fail.

To create a passthrough TPM use the following two options:

-tpmdev passthrough,id=tpm0 -device tpm-tis,tpmdev=tpm0

Note that the "-tpmdev" id is "tpm0" and is referenced by "tpmdev=tpm0" in the device
option.

Linux/Multiboot boot specific:

When using these options, you can use a given Linux or Multiboot kernel without installing
it in the disk image. It can be useful for easier testing of various kernels.

-kernel bzImage
Use bzImage as kernel image. The kernel can be either a Linux kernel or in multiboot
format.

-append cmdline
Use cmdline as kernel command line

-initrd file
Use file as initial ram disk.

-initrd "file1 arg=foo,file2"
This syntax is only available with multiboot.

Use file1 and file2 as modules and pass arg=foo as parameter to the first module.

-dtb file
Use file as a device tree binary (dtb) image and pass it to the kernel on boot.

Debug/Expert options:

-serial dev
Redirect the virtual serial port to host character device dev. The default device is
"vc" in graphical mode and "stdio" in non graphical mode.

This option can be used several times to simulate up to 4 serial ports.

Use "-serial none" to disable all serial ports.

Available character devices are:

vc[:WxH]
Virtual console. Optionally, a width and height can be given in pixel with

vc:800x600

It is also possible to specify width or height in characters:

vc:80Cx24C

pty [Linux only] Pseudo TTY (a new PTY is automatically allocated)

none
No device is allocated.

null
void device

chardev:id
Use a named character device defined with the "-chardev" option.

/dev/XXX
[Linux only] Use host tty, e.g. /dev/ttyS0. The host serial port parameters are
set according to the emulated ones.

/dev/parportN
[Linux only, parallel port only] Use host parallel port N. Currently SPP and EPP
parallel port features can be used.

file:filename
Write output to filename. No character can be read.

stdio
[Unix only] standard input/output

pipe:filename
name pipe filename

COMn
[Windows only] Use host serial port n

udp:[remote_host]:remote_port[@[src_ip]:src_port]
This implements UDP Net Console. When remote_host or src_ip are not specified
they default to 0.0.0.0. When not using a specified src_port a random port is
automatically chosen.

If you just want a simple readonly console you can use "netcat" or "nc", by
starting QEMU with: "-serial udp::4555" and nc as: "nc -u -l -p 4555". Any time
QEMU writes something to that port it will appear in the netconsole session.

If you plan to send characters back via netconsole or you want to stop and start
QEMU a lot of times, you should have QEMU use the same source port each time by
using something like "-serial udp::4555@4556" to QEMU. Another approach is to use
a patched version of netcat which can listen to a TCP port and send and receive
characters via udp. If you have a patched version of netcat which activates
telnet remote echo and single char transfer, then you can use the following
options to step up a netcat redirector to allow telnet on port 5555 to access the
QEMU port.

"QEMU Options:"
-serial udp::4555@4556

"netcat options:"
-u -P 4555 -L 0.0.0.0:4556 -t -p 5555 -I -T

"telnet options:"
localhost 5555

tcp:[host]:port[,server][,nowait][,nodelay]
The TCP Net Console has two modes of operation. It can send the serial I/O to a
location or wait for a connection from a location. By default the TCP Net Console
is sent to host at the port. If you use the server option QEMU will wait for a
client socket application to connect to the port before continuing, unless the
"nowait" option was specified. The "nodelay" option disables the Nagle buffering
algorithm. If host is omitted, 0.0.0.0 is assumed. Only one TCP connection at a
time is accepted. You can use "telnet" to connect to the corresponding character
device.

"Example to send tcp console to 192.168.0.2 port 4444"
-serial tcp:192.168.0.2:4444

"Example to listen and wait on port 4444 for connection"
-serial tcp::4444,server

"Example to not wait and listen on ip 192.168.0.100 port 4444"
-serial tcp:192.168.0.100:4444,server,nowait

telnet:host:port[,server][,nowait][,nodelay]
The telnet protocol is used instead of raw tcp sockets. The options work the same
as if you had specified "-serial tcp". The difference is that the port acts like
a telnet server or client using telnet option negotiation. This will also allow
you to send the MAGIC_SYSRQ sequence if you use a telnet that supports sending the
break sequence. Typically in unix telnet you do it with Control-] and then type
"send break" followed by pressing the enter key.

unix:path[,server][,nowait]
A unix domain socket is used instead of a tcp socket. The option works the same
as if you had specified "-serial tcp" except the unix domain socket path is used
for connections.

mon:dev_string
This is a special option to allow the monitor to be multiplexed onto another
serial port. The monitor is accessed with key sequence of Control-a and then
pressing c. dev_string should be any one of the serial devices specified above.
An example to multiplex the monitor onto a telnet server listening on port 4444
would be:

"-serial mon:telnet::4444,server,nowait"

When the monitor is multiplexed to stdio in this way, Ctrl+C will not terminate
QEMU any more but will be passed to the guest instead.

braille
Braille device. This will use BrlAPI to display the braille output on a real or
fake device.

msmouse
Three button serial mouse. Configure the guest to use Microsoft protocol.

-parallel dev
Redirect the virtual parallel port to host device dev (same devices as the serial
port). On Linux hosts, /dev/parportN can be used to use hardware devices connected on
the corresponding host parallel port.

This option can be used several times to simulate up to 3 parallel ports.

Use "-parallel none" to disable all parallel ports.

-monitor dev
Redirect the monitor to host device dev (same devices as the serial port). The
default device is "vc" in graphical mode and "stdio" in non graphical mode. Use
"-monitor none" to disable the default monitor.

-qmp dev
Like -monitor but opens in 'control' mode.

-mon [chardev=]name[,mode=readline|control][,default]
Setup monitor on chardev name.

-debugcon dev
Redirect the debug console to host device dev (same devices as the serial port). The
debug console is an I/O port which is typically port 0xe9; writing to that I/O port
sends output to this device. The default device is "vc" in graphical mode and "stdio"
in non graphical mode.

-pidfile file
Store the QEMU process PID in file. It is useful if you launch QEMU from a script.

-singlestep
Run the emulation in single step mode.

-S Do not start CPU at startup (you must type 'c' in the monitor).

-realtime mlock=on|off
Run qemu with realtime features. mlocking qemu and guest memory can be enabled via
mlock=on (enabled by default).

-gdb dev
Wait for gdb connection on device dev. Typical connections will likely be TCP-based,
but also UDP, pseudo TTY, or even stdio are reasonable use case. The latter is
allowing to start QEMU from within gdb and establish the connection via a pipe:

(gdb) target remote | exec qemu-system-i386 -gdb stdio ...

-s Shorthand for -gdb tcp::1234, i.e. open a gdbserver on TCP port 1234.

-d item1[,...]
Enable logging of specified items. Use '-d help' for a list of log items.

-D logfile
Output log in logfile instead of to stderr

-L path
Set the directory for the BIOS, VGA BIOS and keymaps.

-bios file
Set the filename for the BIOS.

-enable-kvm
Enable KVM full virtualization support. This option is only available if KVM support
is enabled when compiling.

-xen-domid id
Specify xen guest domain id (XEN only).

-xen-create
Create domain using xen hypercalls, bypassing xend. Warning: should not be used when
xend is in use (XEN only).

-xen-attach
Attach to existing xen domain. xend will use this when starting QEMU (XEN only).

-no-reboot
Exit instead of rebooting.

-no-shutdown
Don't exit QEMU on guest shutdown, but instead only stop the emulation. This allows
for instance switching to monitor to commit changes to the disk image.

-loadvm file
Start right away with a saved state ("loadvm" in monitor)

-daemonize
Daemonize the QEMU process after initialization. QEMU will not detach from standard
IO until it is ready to receive connections on any of its devices. This option is a
useful way for external programs to launch QEMU without having to cope with
initialization race conditions.

-option-rom file
Load the contents of file as an option ROM. This option is useful to load things like
EtherBoot.

-clock method
Force the use of the given methods for timer alarm. To see what timers are available
use "-clock help".

-rtc [base=utc|localtime|date][,clock=host|vm][,driftfix=none|slew]
Specify base as "utc" or "localtime" to let the RTC start at the current UTC or local
time, respectively. "localtime" is required for correct date in MS-DOS or Windows. To
start at a specific point in time, provide date in the format "2006-06-17T16:01:21" or
"2006-06-17". The default base is UTC.

By default the RTC is driven by the host system time. This allows using of the RTC as
accurate reference clock inside the guest, specifically if the host time is smoothly
following an accurate external reference clock, e.g. via NTP. If you want to isolate
the guest time from the host, you can set clock to "rt" instead. To even prevent it
from progressing during suspension, you can set it to "vm".

Enable driftfix (i386 targets only) if you experience time drift problems,
specifically with Windows' ACPI HAL. This option will try to figure out how many timer
interrupts were not processed by the Windows guest and will re-inject them.

-icount [N|auto]
Enable virtual instruction counter. The virtual cpu will execute one instruction
every 2^N ns of virtual time. If "auto" is specified then the virtual cpu speed will
be automatically adjusted to keep virtual time within a few seconds of real time.

Note that while this option can give deterministic behavior, it does not provide cycle
accurate emulation. Modern CPUs contain superscalar out of order cores with complex
cache hierarchies. The number of instructions executed often has little or no
correlation with actual performance.

-watchdog model
Create a virtual hardware watchdog device. Once enabled (by a guest action), the
watchdog must be periodically polled by an agent inside the guest or else the guest
will be restarted.

The model is the model of hardware watchdog to emulate. Choices for model are:
"ib700" (iBASE 700) which is a very simple ISA watchdog with a single timer, or
"i6300esb" (Intel 6300ESB I/O controller hub) which is a much more featureful PCI-
based dual-timer watchdog. Choose a model for which your guest has drivers.

Use "-watchdog help" to list available hardware models. Only one watchdog can be
enabled for a guest.

-watchdog-action action
The action controls what QEMU will do when the watchdog timer expires. The default is
"reset" (forcefully reset the guest). Other possible actions are: "shutdown" (attempt
to gracefully shutdown the guest), "poweroff" (forcefully poweroff the guest), "pause"
(pause the guest), "debug" (print a debug message and continue), or "none" (do
nothing).

Note that the "shutdown" action requires that the guest responds to ACPI signals,
which it may not be able to do in the sort of situations where the watchdog would have
expired, and thus "-watchdog-action shutdown" is not recommended for production use.

Examples:

"-watchdog i6300esb -watchdog-action pause"
"-watchdog ib700"
-echr numeric_ascii_value
Change the escape character used for switching to the monitor when using monitor and
serial sharing. The default is 0x01 when using the "-nographic" option. 0x01 is
equal to pressing "Control-a". You can select a different character from the ascii
control keys where 1 through 26 map to Control-a through Control-z. For instance you
could use the either of the following to change the escape character to Control-t.

"-echr 0x14"
"-echr 20"
-virtioconsole c
Set virtio console.

This option is maintained for backward compatibility.

Please use "-device virtconsole" for the new way of invocation.

-show-cursor
Show cursor.

-tb-size n
Set TB size.

-incoming port
Prepare for incoming migration, listen on port.

-nodefaults
Don't create default devices. Normally, QEMU sets the default devices like serial
port, parallel port, virtual console, monitor device, VGA adapter, floppy and CD-ROM
drive and others. The "-nodefaults" option will disable all those default devices.

-chroot dir
Immediately before starting guest execution, chroot to the specified directory.
Especially useful in combination with -runas.

-runas user
Immediately before starting guest execution, drop root privileges, switching to the
specified user.

-prom-env variable=value
Set OpenBIOS nvram variable to given value (PPC, SPARC only).

-semihosting
Semihosting mode (ARM, M68K, Xtensa only).

-old-param
Old param mode (ARM only).

-sandbox arg
Enable Seccomp mode 2 system call filter. 'on' will enable syscall filtering and 'off'
will disable it. The default is 'off'.

-readconfig file
Read device configuration from file. This approach is useful when you want to spawn
QEMU process with many command line options but you don't want to exceed the command
line character limit.

-writeconfig file
Write device configuration to file. The file can be either filename to save command
line and device configuration into file or dash "-") character to print the output to
stdout. This can be later used as input file for "-readconfig" option.

-nodefconfig
Normally QEMU loads configuration files from sysconfdir and datadir at startup. The
"-nodefconfig" option will prevent QEMU from loading any of those config files.

-no-user-config
The "-no-user-config" option makes QEMU not load any of the user-provided config files
on sysconfdir, but won't make it skip the QEMU-provided config files from datadir.

-trace [events=file][,file=file]
Specify tracing options.

events=file
Immediately enable events listed in file. The file must contain one event name
(as listed in the trace-events file) per line. This option is only available if
QEMU has been compiled with either simple or stderr tracing backend.

file=file
Log output traces to file.

This option is only available if QEMU has been compiled with the simple tracing
backend.

-enable-fips
Enable FIPS 140-2 compliance mode.

-object typename[,prop1=value1,...]
Create an new object of type typename setting properties in the order they are
specified. Note that the 'id' property must be set. These objects are placed in the
'/objects' path.

-msg timestamp[=on|off]
prepend a timestamp to each log message.(default:on)

-dump-vmstate file
Dump json-encoded vmstate information for current machine type to file in file

During the graphical emulation, you can use special key combinations to change modes. The
default key mappings are shown below, but if you use "-alt-grab" then the modifier is
Ctrl-Alt-Shift (instead of Ctrl-Alt) and if you use "-ctrl-grab" then the modifier is the
right Ctrl key (instead of Ctrl-Alt):

Ctrl-Alt-f
Toggle full screen

Ctrl-Alt-+
Enlarge the screen

Ctrl-Alt--
Shrink the screen

Ctrl-Alt-u
Restore the screen's un-scaled dimensions

Ctrl-Alt-n
Switch to virtual console 'n'. Standard console mappings are:

1 Target system display

2 Monitor

3 Serial port

Ctrl-Alt
Toggle mouse and keyboard grab.

In the virtual consoles, you can use Ctrl-Up, Ctrl-Down, Ctrl-PageUp and Ctrl-PageDown to
move in the back log.

During emulation, if you are using the -nographic option, use Ctrl-a h to get terminal
commands:

Ctrl-a h
Ctrl-a ?
Print this help

Ctrl-a x
Exit emulator

Ctrl-a s
Save disk data back to file (if -snapshot)

Ctrl-a t
Toggle console timestamps

Ctrl-a b
Send break (magic sysrq in Linux)

Ctrl-a c
Switch between console and monitor

Ctrl-a Ctrl-a
Send Ctrl-a

The following options are specific to the PowerPC emulation:

-g WxH[xDEPTH]
Set the initial VGA graphic mode. The default is 800x600x32.

-prom-env string
Set OpenBIOS variables in NVRAM, for example:

qemu-system-ppc -prom-env 'auto-boot?=false' \
-prom-env 'boot-device=hd:2,\yaboot' \
-prom-env 'boot-args=conf=hd:2,\yaboot.conf'

These variables are not used by Open Hack'Ware.

The following options are specific to the Sparc32 emulation:

-g WxHx[xDEPTH]
Set the initial graphics mode. For TCX, the default is 1024x768x8 with the option of
1024x768x24. For cgthree, the default is 1024x768x8 with the option of 1152x900x8 for
people who wish to use OBP.

-prom-env string
Set OpenBIOS variables in NVRAM, for example:

qemu-system-sparc -prom-env 'auto-boot?=false' \
-prom-env 'boot-device=sd(0,2,0):d' -prom-env 'boot-args=linux single'

-M [SS-4|SS-5|SS-10|SS-20|SS-600MP|LX|Voyager|SPARCClassic] [|SPARCbook]
Set the emulated machine type. Default is SS-5.

The following options are specific to the Sparc64 emulation:

-prom-env string
Set OpenBIOS variables in NVRAM, for example:

qemu-system-sparc64 -prom-env 'auto-boot?=false'

-M [sun4u|sun4v|Niagara]
Set the emulated machine type. The default is sun4u.

SEE ALSO
The HTML documentation of QEMU for more precise information and Linux user mode emulator
invocation.

AUTHOR
Fabrice Bellard

2016-05-08 QEMU(1)

/man
rootr.net - man pages