:: RootR ::  Hosting Order Map Login   Secure Inter-Network Operations  
 
threads(3perl) - phpMan

Command: man perldoc info search(apropos)  


threads(3perl)                   Perl Programmers Reference Guide                  threads(3perl)



NAME
       threads - Perl interpreter-based threads

VERSION
       This document describes threads version 1.92

WARNING
       The "interpreter-based threads" provided by Perl are not the fast, lightweight system for
       multitasking that one might expect or hope for.  Threads are implemented in a way that
       make them easy to misuse.  Few people know how to use them correctly or will be able to
       provide help.

       The use of interpreter-based threads in perl is officially discouraged.

SYNOPSIS
           use threads ('yield',
                        'stack_size' => 64*4096,
                        'exit' => 'threads_only',
                        'stringify');

           sub start_thread {
               my @args = @_;
               print('Thread started: ', join(' ', @args), "\n");
           }
           my $thr = threads->create('start_thread', 'argument');
           $thr->join();

           threads->create(sub { print("I am a thread\n"); })->join();

           my $thr2 = async { foreach (@files) { ... } };
           $thr2->join();
           if (my $err = $thr2->error()) {
               warn("Thread error: $err\n");
           }

           # Invoke thread in list context (implicit) so it can return a list
           my ($thr) = threads->create(sub { return (qw/a b c/); });
           # or specify list context explicitly
           my $thr = threads->create({'context' => 'list'},
                                     sub { return (qw/a b c/); });
           my @results = $thr->join();

           $thr->detach();

           # Get a thread's object
           $thr = threads->self();
           $thr = threads->object($tid);

           # Get a thread's ID
           $tid = threads->tid();
           $tid = $thr->tid();
           $tid = "$thr";

           # Give other threads a chance to run
           threads->yield();
           yield();

           # Lists of non-detached threads
           my @threads = threads->list();
           my $thread_count = threads->list();

           my @running = threads->list(threads::running);
           my @joinable = threads->list(threads::joinable);

           # Test thread objects
           if ($thr1 == $thr2) {
               ...
           }

           # Manage thread stack size
           $stack_size = threads->get_stack_size();
           $old_size = threads->set_stack_size(32*4096);

           # Create a thread with a specific context and stack size
           my $thr = threads->create({ 'context'    => 'list',
                                       'stack_size' => 32*4096,
                                       'exit'       => 'thread_only' },
                                     \&foo);

           # Get thread's context
           my $wantarray = $thr->wantarray();

           # Check thread's state
           if ($thr->is_running()) {
               sleep(1);
           }
           if ($thr->is_joinable()) {
               $thr->join();
           }

           # Send a signal to a thread
           $thr->kill('SIGUSR1');

           # Exit a thread
           threads->exit();

DESCRIPTION
       Since Perl 5.8, thread programming has been available using a model called interpreter
       threads which provides a new Perl interpreter for each thread, and, by default, results in
       no data or state information being shared between threads.

       (Prior to Perl 5.8, 5005threads was available through the "Thread.pm" API.  This threading
       model has been deprecated, and was removed as of Perl 5.10.0.)

       As just mentioned, all variables are, by default, thread local.  To use shared variables,
       you need to also load threads::shared:

           use threads;
           use threads::shared;

       When loading threads::shared, you must "use threads" before you "use threads::shared".
       ("threads" will emit a warning if you do it the other way around.)

       It is strongly recommended that you enable threads via "use threads" as early as possible
       in your script.

       If needed, scripts can be written so as to run on both threaded and non-threaded Perls:

           my $can_use_threads = eval 'use threads; 1';
           if ($can_use_threads) {
               # Do processing using threads
               ...
           } else {
               # Do it without using threads
               ...
           }

       $thr = threads->create(FUNCTION, ARGS)
           This will create a new thread that will begin execution with the specified entry point
           function, and give it the ARGS list as parameters.  It will return the corresponding
           threads object, or "undef" if thread creation failed.

           FUNCTION may either be the name of a function, an anonymous subroutine, or a code ref.

               my $thr = threads->create('func_name', ...);
                   # or
               my $thr = threads->create(sub { ... }, ...);
                   # or
               my $thr = threads->create(\&func, ...);

           The "->new()" method is an alias for "->create()".

       $thr->join()
           This will wait for the corresponding thread to complete its execution.  When the
           thread finishes, "->join()" will return the return value(s) of the entry point
           function.

           The context (void, scalar or list) for the return value(s) for "->join()" is
           determined at the time of thread creation.

               # Create thread in list context (implicit)
               my ($thr1) = threads->create(sub {
                                               my @results = qw(a b c);
                                               return (@results);
                                            });
               #   or (explicit)
               my $thr1 = threads->create({'context' => 'list'},
                                          sub {
                                               my @results = qw(a b c);
                                               return (@results);
                                          });
               # Retrieve list results from thread
               my @res1 = $thr1->join();

               # Create thread in scalar context (implicit)
               my $thr2 = threads->create(sub {
                                               my $result = 42;
                                               return ($result);
                                            });
               # Retrieve scalar result from thread
               my $res2 = $thr2->join();

               # Create a thread in void context (explicit)
               my $thr3 = threads->create({'void' => 1},
                                          sub { print("Hello, world\n"); });
               # Join the thread in void context (i.e., no return value)
               $thr3->join();

           See "THREAD CONTEXT" for more details.

           If the program exits without all threads having either been joined or detached, then a
           warning will be issued.

           Calling "->join()" or "->detach()" on an already joined thread will cause an error to
           be thrown.

       $thr->detach()
           Makes the thread unjoinable, and causes any eventual return value to be discarded.
           When the program exits, any detached threads that are still running are silently
           terminated.

           If the program exits without all threads having either been joined or detached, then a
           warning will be issued.

           Calling "->join()" or "->detach()" on an already detached thread will cause an error
           to be thrown.

       threads->detach()
           Class method that allows a thread to detach itself.

       threads->self()
           Class method that allows a thread to obtain its own threads object.

       $thr->tid()
           Returns the ID of the thread.  Thread IDs are unique integers with the main thread in
           a program being 0, and incrementing by 1 for every thread created.

       threads->tid()
           Class method that allows a thread to obtain its own ID.

       "$thr"
           If you add the "stringify" import option to your "use threads" declaration, then using
           a threads object in a string or a string context (e.g., as a hash key) will cause its
           ID to be used as the value:

               use threads qw(stringify);

               my $thr = threads->create(...);
               print("Thread $thr started...\n");  # Prints out: Thread 1 started...

       threads->object($tid)
           This will return the threads object for the active thread associated with the
           specified thread ID.  If $tid is the value for the current thread, then this call
           works the same as "->self()".  Otherwise, returns "undef" if there is no thread
           associated with the TID, if the thread is joined or detached, if no TID is specified
           or if the specified TID is undef.

       threads->yield()
           This is a suggestion to the OS to let this thread yield CPU time to other threads.
           What actually happens is highly dependent upon the underlying thread implementation.

           You may do "use threads qw(yield)", and then just use "yield()" in your code.

       threads->list()
       threads->list(threads::all)
       threads->list(threads::running)
       threads->list(threads::joinable)
           With no arguments (or using "threads::all") and in a list context, returns a list of
           all non-joined, non-detached threads objects.  In a scalar context, returns a count of
           the same.

           With a true argument (using "threads::running"), returns a list of all non-joined,
           non-detached threads objects that are still running.

           With a false argument (using "threads::joinable"), returns a list of all non-joined,
           non-detached threads objects that have finished running (i.e., for which "->join()"
           will not block).

       $thr1->equal($thr2)
           Tests if two threads objects are the same thread or not.  This is overloaded to the
           more natural forms:

               if ($thr1 == $thr2) {
                   print("Threads are the same\n");
               }
               # or
               if ($thr1 != $thr2) {
                   print("Threads differ\n");
               }

           (Thread comparison is based on thread IDs.)

       async BLOCK;
           "async" creates a thread to execute the block immediately following it.  This block is
           treated as an anonymous subroutine, and so must have a semicolon after the closing
           brace.  Like "threads->create()", "async" returns a threads object.

       $thr->error()
           Threads are executed in an "eval" context.  This method will return "undef" if the
           thread terminates normally.  Otherwise, it returns the value of $@ associated with the
           thread's execution status in its "eval" context.

       $thr->_handle()
           This private method returns a pointer (i.e., the memory location expressed as an
           unsigned integer) to the internal thread structure associated with a threads object.
           For Win32, this is a pointer to the "HANDLE" value returned by "CreateThread" (i.e.,
           "HANDLE *"); for other platforms, it is a pointer to the "pthread_t" structure used in
           the "pthread_create" call (i.e., "pthread_t *").

           This method is of no use for general Perl threads programming.  Its intent is to
           provide other (XS-based) thread modules with the capability to access, and possibly
           manipulate, the underlying thread structure associated with a Perl thread.

       threads->_handle()
           Class method that allows a thread to obtain its own handle.

EXITING A THREAD
       The usual method for terminating a thread is to return() from the entry point function
       with the appropriate return value(s).

       threads->exit()
           If needed, a thread can be exited at any time by calling "threads->exit()".  This will
           cause the thread to return "undef" in a scalar context, or the empty list in a list
           context.

           When called from the main thread, this behaves the same as exit(0).

       threads->exit(status)
           When called from a thread, this behaves like "threads->exit()" (i.e., the exit status
           code is ignored).

           When called from the main thread, this behaves the same as "exit(status)".

       die()
           Calling "die()" in a thread indicates an abnormal exit for the thread.  Any
           $SIG{__DIE__} handler in the thread will be called first, and then the thread will
           exit with a warning message that will contain any arguments passed in the "die()"
           call.

       exit(status)
           Calling exit() inside a thread causes the whole application to terminate.  Because of
           this, the use of "exit()" inside threaded code, or in modules that might be used in
           threaded applications, is strongly discouraged.

           If "exit()" really is needed, then consider using the following:

               threads->exit() if threads->can('exit');   # Thread friendly
               exit(status);

       use threads 'exit' => 'threads_only'
           This globally overrides the default behavior of calling "exit()" inside a thread, and
           effectively causes such calls to behave the same as "threads->exit()".  In other
           words, with this setting, calling "exit()" causes only the thread to terminate.

           Because of its global effect, this setting should not be used inside modules or the
           like.

           The main thread is unaffected by this setting.

       threads->create({'exit' => 'thread_only'}, ...)
           This overrides the default behavior of "exit()" inside the newly created thread only.

       $thr->set_thread_exit_only(boolean)
           This can be used to change the exit thread only behavior for a thread after it has
           been created.  With a true argument, "exit()" will cause only the thread to exit.
           With a false argument, "exit()" will terminate the application.

           The main thread is unaffected by this call.

       threads->set_thread_exit_only(boolean)
           Class method for use inside a thread to change its own behavior for "exit()".

           The main thread is unaffected by this call.

THREAD STATE
       The following boolean methods are useful in determining the state of a thread.

       $thr->is_running()
           Returns true if a thread is still running (i.e., if its entry point function has not
           yet finished or exited).

       $thr->is_joinable()
           Returns true if the thread has finished running, is not detached and has not yet been
           joined.  In other words, the thread is ready to be joined, and a call to
           "$thr->join()" will not block.

       $thr->is_detached()
           Returns true if the thread has been detached.

       threads->is_detached()
           Class method that allows a thread to determine whether or not it is detached.

THREAD CONTEXT
       As with subroutines, the type of value returned from a thread's entry point function may
       be determined by the thread's context:  list, scalar or void.  The thread's context is
       determined at thread creation.  This is necessary so that the context is available to the
       entry point function via wantarray().  The thread may then specify a value of the
       appropriate type to be returned from "->join()".

   Explicit context
       Because thread creation and thread joining may occur in different contexts, it may be
       desirable to state the context explicitly to the thread's entry point function.  This may
       be done by calling "->create()" with a hash reference as the first argument:

           my $thr = threads->create({'context' => 'list'}, \&foo);
           ...
           my @results = $thr->join();

       In the above, the threads object is returned to the parent thread in scalar context, and
       the thread's entry point function "foo" will be called in list (array) context such that
       the parent thread can receive a list (array) from the "->join()" call.  ('array' is
       synonymous with 'list'.)

       Similarly, if you need the threads object, but your thread will not be returning a value
       (i.e., void context), you would do the following:

           my $thr = threads->create({'context' => 'void'}, \&foo);
           ...
           $thr->join();

       The context type may also be used as the key in the hash reference followed by a true
       value:

           threads->create({'scalar' => 1}, \&foo);
           ...
           my ($thr) = threads->list();
           my $result = $thr->join();

   Implicit context
       If not explicitly stated, the thread's context is implied from the context of the
       "->create()" call:

           # Create thread in list context
           my ($thr) = threads->create(...);

           # Create thread in scalar context
           my $thr = threads->create(...);

           # Create thread in void context
           threads->create(...);

   $thr->wantarray()
       This returns the thread's context in the same manner as wantarray().

   threads->wantarray()
       Class method to return the current thread's context.  This returns the same value as
       running wantarray() inside the current thread's entry point function.

THREAD STACK SIZE
       The default per-thread stack size for different platforms varies significantly, and is
       almost always far more than is needed for most applications.  On Win32, Perl's makefile
       explicitly sets the default stack to 16 MB; on most other platforms, the system default is
       used, which again may be much larger than is needed.

       By tuning the stack size to more accurately reflect your application's needs, you may
       significantly reduce your application's memory usage, and increase the number of
       simultaneously running threads.

       Note that on Windows, address space allocation granularity is 64 KB, therefore, setting
       the stack smaller than that on Win32 Perl will not save any more memory.

       threads->get_stack_size();
           Returns the current default per-thread stack size.  The default is zero, which means
           the system default stack size is currently in use.

       $size = $thr->get_stack_size();
           Returns the stack size for a particular thread.  A return value of zero indicates the
           system default stack size was used for the thread.

       $old_size = threads->set_stack_size($new_size);
           Sets a new default per-thread stack size, and returns the previous setting.

           Some platforms have a minimum thread stack size.  Trying to set the stack size below
           this value will result in a warning, and the minimum stack size will be used.

           Some Linux platforms have a maximum stack size.  Setting too large of a stack size
           will cause thread creation to fail.

           If needed, $new_size will be rounded up to the next multiple of the memory page size
           (usually 4096 or 8192).

           Threads created after the stack size is set will then either call
           "pthread_attr_setstacksize()" (for pthreads platforms), or supply the stack size to
           "CreateThread()" (for Win32 Perl).

           (Obviously, this call does not affect any currently extant threads.)

       use threads ('stack_size' => VALUE);
           This sets the default per-thread stack size at the start of the application.

       $ENV{'PERL5_ITHREADS_STACK_SIZE'}
           The default per-thread stack size may be set at the start of the application through
           the use of the environment variable "PERL5_ITHREADS_STACK_SIZE":

               PERL5_ITHREADS_STACK_SIZE=1048576
               export PERL5_ITHREADS_STACK_SIZE
               perl -e'use threads; print(threads->get_stack_size(), "\n")'

           This value overrides any "stack_size" parameter given to "use threads".  Its primary
           purpose is to permit setting the per-thread stack size for legacy threaded
           applications.

       threads->create({'stack_size' => VALUE}, FUNCTION, ARGS)
           To specify a particular stack size for any individual thread, call "->create()" with a
           hash reference as the first argument:

               my $thr = threads->create({'stack_size' => 32*4096}, \&foo, @args);

       $thr2 = $thr1->create(FUNCTION, ARGS)
           This creates a new thread ($thr2) that inherits the stack size from an existing thread
           ($thr1).  This is shorthand for the following:

               my $stack_size = $thr1->get_stack_size();
               my $thr2 = threads->create({'stack_size' => $stack_size}, FUNCTION, ARGS);

THREAD SIGNALLING
       When safe signals is in effect (the default behavior - see "Unsafe signals" for more
       details), then signals may be sent and acted upon by individual threads.

       $thr->kill('SIG...');
           Sends the specified signal to the thread.  Signal names and (positive) signal numbers
           are the same as those supported by kill().  For example, 'SIGTERM', 'TERM' and
           (depending on the OS) 15 are all valid arguments to "->kill()".

           Returns the thread object to allow for method chaining:

               $thr->kill('SIG...')->join();

       Signal handlers need to be set up in the threads for the signals they are expected to act
       upon.  Here's an example for cancelling a thread:

           use threads;

           sub thr_func
           {
               # Thread 'cancellation' signal handler
               $SIG{'KILL'} = sub { threads->exit(); };

               ...
           }

           # Create a thread
           my $thr = threads->create('thr_func');

           ...

           # Signal the thread to terminate, and then detach
           # it so that it will get cleaned up automatically
           $thr->kill('KILL')->detach();

       Here's another simplistic example that illustrates the use of thread signalling in
       conjunction with a semaphore to provide rudimentary suspend and resume capabilities:

           use threads;
           use Thread::Semaphore;

           sub thr_func
           {
               my $sema = shift;

               # Thread 'suspend/resume' signal handler
               $SIG{'STOP'} = sub {
                   $sema->down();      # Thread suspended
                   $sema->up();        # Thread resumes
               };

               ...
           }

           # Create a semaphore and pass it to a thread
           my $sema = Thread::Semaphore->new();
           my $thr = threads->create('thr_func', $sema);

           # Suspend the thread
           $sema->down();
           $thr->kill('STOP');

           ...

           # Allow the thread to continue
           $sema->up();

       CAVEAT:  The thread signalling capability provided by this module does not actually send
       signals via the OS.  It emulates signals at the Perl-level such that signal handlers are
       called in the appropriate thread.  For example, sending "$thr->kill('STOP')" does not
       actually suspend a thread (or the whole process), but does cause a $SIG{'STOP'} handler to
       be called in that thread (as illustrated above).

       As such, signals that would normally not be appropriate to use in the "kill()" command
       (e.g., "kill('KILL', $$)") are okay to use with the "->kill()" method (again, as
       illustrated above).

       Correspondingly, sending a signal to a thread does not disrupt the operation the thread is
       currently working on:  The signal will be acted upon after the current operation has
       completed.  For instance, if the thread is stuck on an I/O call, sending it a signal will
       not cause the I/O call to be interrupted such that the signal is acted up immediately.

       Sending a signal to a terminated/finished thread is ignored.

WARNINGS
       Perl exited with active threads:
           If the program exits without all threads having either been joined or detached, then
           this warning will be issued.

           NOTE:  If the main thread exits, then this warning cannot be suppressed using "no
           warnings 'threads';" as suggested below.

       Thread creation failed: pthread_create returned #
           See the appropriate man page for "pthread_create" to determine the actual cause for
           the failure.

       Thread # terminated abnormally: ...
           A thread terminated in some manner other than just returning from its entry point
           function, or by using "threads->exit()".  For example, the thread may have terminated
           because of an error, or by using "die".

       Using minimum thread stack size of #
           Some platforms have a minimum thread stack size.  Trying to set the stack size below
           this value will result in the above warning, and the stack size will be set to the
           minimum.

       Thread creation failed: pthread_attr_setstacksize(SIZE) returned 22
           The specified SIZE exceeds the system's maximum stack size.  Use a smaller value for
           the stack size.

       If needed, thread warnings can be suppressed by using:

           no warnings 'threads';

       in the appropriate scope.

ERRORS
       This Perl not built to support threads
           The particular copy of Perl that you're trying to use was not built using the
           "useithreads" configuration option.

           Having threads support requires all of Perl and all of the XS modules in the Perl
           installation to be rebuilt; it is not just a question of adding the threads module
           (i.e., threaded and non-threaded Perls are binary incompatible).

       Cannot change stack size of an existing thread
           The stack size of currently extant threads cannot be changed, therefore, the following
           results in the above error:

               $thr->set_stack_size($size);

       Cannot signal threads without safe signals
           Safe signals must be in effect to use the "->kill()" signalling method.  See "Unsafe
           signals" for more details.

       Unrecognized signal name: ...
           The particular copy of Perl that you're trying to use does not support the specified
           signal being used in a "->kill()" call.

BUGS AND LIMITATIONS
       Before you consider posting a bug report, please consult, and possibly post a message to
       the discussion forum to see if what you've encountered is a known problem.

       Thread-safe modules
           See "Making your module threadsafe" in perlmod when creating modules that may be used
           in threaded applications, especially if those modules use non-Perl data, or XS code.

       Using non-thread-safe modules
           Unfortunately, you may encounter Perl modules that are not thread-safe.  For example,
           they may crash the Perl interpreter during execution, or may dump core on termination.
           Depending on the module and the requirements of your application, it may be possible
           to work around such difficulties.

           If the module will only be used inside a thread, you can try loading the module from
           inside the thread entry point function using "require" (and "import" if needed):

               sub thr_func
               {
                   require Unsafe::Module
                   # Unsafe::Module->import(...);

                   ....
               }

           If the module is needed inside the main thread, try modifying your application so that
           the module is loaded (again using "require" and "->import()") after any threads are
           started, and in such a way that no other threads are started afterwards.

           If the above does not work, or is not adequate for your application, then file a bug
           report on <http://rt.cpan.org/Public/> against the problematic module.

       Memory consumption
           On most systems, frequent and continual creation and destruction of threads can lead
           to ever-increasing growth in the memory footprint of the Perl interpreter.  While it
           is simple to just launch threads and then "->join()" or "->detach()" them, for long-
           lived applications, it is better to maintain a pool of threads, and to reuse them for
           the work needed, using queues to notify threads of pending work.  The CPAN
           distribution of this module contains a simple example (examples/pool_reuse.pl)
           illustrating the creation, use and monitoring of a pool of reusable threads.

       Current working directory
           On all platforms except MSWin32, the setting for the current working directory is
           shared among all threads such that changing it in one thread (e.g., using "chdir()")
           will affect all the threads in the application.

           On MSWin32, each thread maintains its own the current working directory setting.

       Environment variables
           Currently, on all platforms except MSWin32, all system calls (e.g., using "system()"
           or back-ticks) made from threads use the environment variable settings from the main
           thread.  In other words, changes made to %ENV in a thread will not be visible in
           system calls made by that thread.

           To work around this, set environment variables as part of the system call.  For
           example:

               my $msg = 'hello';
               system("FOO=$msg; echo \$FOO");   # Outputs 'hello' to STDOUT

           On MSWin32, each thread maintains its own set of environment variables.

       Catching signals
           Signals are caught by the main thread (thread ID = 0) of a script.  Therefore, setting
           up signal handlers in threads for purposes other than "THREAD SIGNALLING" as
           documented above will not accomplish what is intended.

           This is especially true if trying to catch "SIGALRM" in a thread.  To handle alarms in
           threads, set up a signal handler in the main thread, and then use "THREAD SIGNALLING"
           to relay the signal to the thread:

             # Create thread with a task that may time out
             my $thr = threads->create(sub {
                 threads->yield();
                 eval {
                     $SIG{ALRM} = sub { die("Timeout\n"); };
                     alarm(10);
                     ...  # Do work here
                     alarm(0);
                 };
                 if ($@ =~ /Timeout/) {
                     warn("Task in thread timed out\n");
                 }
             };

             # Set signal handler to relay SIGALRM to thread
             $SIG{ALRM} = sub { $thr->kill('ALRM') };

             ... # Main thread continues working

       Parent-child threads
           On some platforms, it might not be possible to destroy parent threads while there are
           still existing child threads.

       Creating threads inside special blocks
           Creating threads inside "BEGIN", "CHECK" or "INIT" blocks should not be relied upon.
           Depending on the Perl version and the application code, results may range from
           success, to (apparently harmless) warnings of leaked scalar, or all the way up to
           crashing of the Perl interpreter.

       Unsafe signals
           Since Perl 5.8.0, signals have been made safer in Perl by postponing their handling
           until the interpreter is in a safe state.  See "Safe Signals" in perl58delta and
           "Deferred Signals (Safe Signals)" in perlipc for more details.

           Safe signals is the default behavior, and the old, immediate, unsafe signalling
           behavior is only in effect in the following situations:

           ·   Perl has been built with "PERL_OLD_SIGNALS" (see "perl -V").

           ·   The environment variable "PERL_SIGNALS" is set to "unsafe" (see "PERL_SIGNALS" in
               perlrun).

           ·   The module Perl::Unsafe::Signals is used.

           If unsafe signals is in effect, then signal handling is not thread-safe, and the
           "->kill()" signalling method cannot be used.

       Returning closures from threads
           Returning closures from threads should not be relied upon.  Depending on the Perl
           version and the application code, results may range from success, to (apparently
           harmless) warnings of leaked scalar, or all the way up to crashing of the Perl
           interpreter.

       Returning objects from threads
           Returning objects from threads does not work.  Depending on the classes involved, you
           may be able to work around this by returning a serialized version of the object (e.g.,
           using Data::Dumper or Storable), and then reconstituting it in the joining thread.  If
           you're using Perl 5.10.0 or later, and if the class supports shared objects, you can
           pass them via shared queues.

       END blocks in threads
           It is possible to add END blocks to threads by using require or eval with the
           appropriate code.  These "END" blocks will then be executed when the thread's
           interpreter is destroyed (i.e., either during a "->join()" call, or at program
           termination).

           However, calling any threads methods in such an "END" block will most likely fail
           (e.g., the application may hang, or generate an error) due to mutexes that are needed
           to control functionality within the threads module.

           For this reason, the use of "END" blocks in threads is strongly discouraged.

       Open directory handles
           In perl 5.14 and higher, on systems other than Windows that do not support the
           "fchdir" C function, directory handles (see opendir) will not be copied to new
           threads. You can use the "d_fchdir" variable in Config.pm to determine whether your
           system supports it.

           In prior perl versions, spawning threads with open directory handles would crash the
           interpreter.  [perl #75154] <http://rt.perl.org/rt3/Public/Bug/Display.html?id=75154>

       Perl Bugs and the CPAN Version of threads
           Support for threads extends beyond the code in this module (i.e., threads.pm and
           threads.xs), and into the Perl interpreter itself.  Older versions of Perl contain
           bugs that may manifest themselves despite using the latest version of threads from
           CPAN.  There is no workaround for this other than upgrading to the latest version of
           Perl.

           Even with the latest version of Perl, it is known that certain constructs with threads
           may result in warning messages concerning leaked scalars or unreferenced scalars.
           However, such warnings are harmless, and may safely be ignored.

           You can search for threads related bug reports at <http://rt.cpan.org/Public/>.  If
           needed submit any new bugs, problems, patches, etc. to:
           <http://rt.cpan.org/Public/Dist/Display.html?Name=threads>

REQUIREMENTS
       Perl 5.8.0 or later

SEE ALSO
       threads Discussion Forum on CPAN: <http://www.cpanforum.com/dist/threads>

       threads::shared, perlthrtut

       <http://www.perl.com/pub/a/2002/06/11/threads.html> and
       <http://www.perl.com/pub/a/2002/09/04/threads.html>

       Perl threads mailing list: <http://lists.perl.org/list/ithreads.html>

       Stack size discussion: <http://www.perlmonks.org/?node_id=532956>

AUTHOR
       Artur Bergman <sky AT crucially DOT net>

       CPAN version produced by Jerry D. Hedden <jdhedden AT cpan DOT org>

LICENSE
       threads is released under the same license as Perl.

ACKNOWLEDGEMENTS
       Richard Soderberg <perl AT crystalflame DOT net> - Helping me out tons, trying to find
       reasons for races and other weird bugs!

       Simon Cozens <simon AT brecon DOT co DOT uk> - Being there to answer zillions of annoying
       questions

       Rocco Caputo <troc AT netrus DOT net>

       Vipul Ved Prakash <mail AT vipul DOT net> - Helping with debugging

       Dean Arnold <darnold AT presicient DOT com> - Stack size API



perl v5.20.2                                2014-12-27                             threads(3perl)


/man
rootr.net - man pages