:: RootR ::  Hosting Order Map Login   Secure Inter-Network Operations  
 
www-browser(1) - phpMan

Command: man perldoc info search(apropos)  


LINKS2(1)                            General Commands Manual                            LINKS2(1)



NAME
       links - lynx-like alternative character mode WWW browser

SYNOPSIS
       links2 [options] URL

DESCRIPTION
       links2 is a text mode WWW browser with ncurses interface, supporting colors, correct table
       rendering, background downloading, menu driven configuration interface and slim code.

       Frames are supported. You can have different file formats associated with  external  view‐
       ers. mailto: and telnet: are supported via external clients.

       links2 can handle local (file://) or remote (http:// or ftp://) URLs.

OPTIONS
       Most  options  can be set in the user interface or config file, so usually you do not need
       to care about them.


       -help  Print a help screen


       -version
              Prints the links version number and exit.


       -lookup <hostname>
              Does name lookup, like command "host".


       -g     Run Links2 in graphics mode. If not given, Links2 will run in text  mode.   Running
              in  graphics mode means that Links2 will probe all compiled‐in graphics devices and
              run on the first found. If none found, links2 will not run in graphics  mode.  This
              option works only if ‐‐enable‐graphics was given to ./configure.


       -no-g  Run in text mode (overrides previous -g).


       -driver <driver name>
              Graphics  driver  to  use.  Drivers are: x, svgalib, fb, directfb, pmshell, atheos.
              List of drivers will be shown if you give it an unknown driver.  Available  drivers
              depend on your operating system and available libraries.


       -mode <parameter>
              Pass  a  parameter  to the graphics driver. On SVGAlib, this is widthxheightxdepth,
              (where depth is 16, 256, 32K, 64K, 16M or 16M32) and defines the graphics mode,  on
              X the format is WIDTHxHEIGHT and defines the window size.


       -display <x-display>
              Set Xwindow display.


       -force-html
              Treat  files  with unknown type as html rather than text.  (can be toggled with '\'
              key)


       -source <url>
              Write unformatted data stream to stdout.


       -dump <url>
              Write formatted document to stdout.


       -width <number>
              For dump, document will be formatted to this screen width (but it can still  exceed
              it if lines can't be broken).


       -codepage <codepage>
              For dump, convert output to specified character set -- for example iso-8859-2, win‐
              dows-1250.


       -anonymous
              Restrict links so that it can run on an anonymous account.  No local file browsing.
              No downloads. Executing of viewers is allowed, but user can't add or modify entries
              in association table.


       -no-connect
              Runs links2 as a separate instance - instead of connecting to existing instance.


       -download-dir <path>
              Default download directory.  (default: actual dir)


       -language <language>
              Set user interface language.


       -max-connections <max>
              Maximum number of concurrent connections.  (default: 10)


       -max-connections-to-host <max>
              Maximum number of concurrent connection to a given host.  (default: 2)


       -retries <retry>
              Number of retries.  (default: 3)


       -receive-timeout <sec>
              Timeout on receive.  (default: 120)


       -unrestartable-receive-timeout <sec>
              Timeout on non restartable connections.  (default: 600)


       -bind-address <ip address>
              Use a specific local IP address.


       -bind-address-ipv6 <ipv6 address>
              Use a specific local IPv6 address.


       -async-dns <0>/<1>
              Asynchronous DNS resolver on(1)/off(0).


       -download-utime <0>/<1>
              Set time of downloaded files to last modification time reported by server.


       -format-cache-size <num>
              Number of formatted document pages cached.  (default: 5)


       -memory-cache-size <bytes>
              Cache memory in bytes.  (default: 1048576)


       -image-cache-size <bytes>
              Cache memory in bytes.  (default: 1048576)


       -font-cache-size <bytes>
              Cache memory in bytes.  (default: 2097152)


       -aggressive-cache <0>/<1>
              Always cache  everything  regardless  of  server's  caching  recomendations.   Many
              servers  deny  caching  even if their content is not changing just to get more hits
              and more money from ads.


       -address-preference <0>/<1>/<2>/<3>/<4>
              (default 0) 0 - use system default.  1 - prefer IPv4.  2 - prefer IPv6.   3  -  use
              only IPv4.  4 - use only IPv6.


       -http-proxy <host:port>
              Host and port number of the HTTP proxy, or blank.  (default: blank)


       -ftp-proxy <host:port>
              Host and port number of the FTP proxy, or blank.  (default: blank)


       -https-proxy <host:port>
              Host and port number of the HTTPS proxy, or blank.  (default: blank)


       -socks-proxy <user@host:port>
              Userid, host and port of Socks4a, or blank.  (default: blank)


       -append-text-to-dns-lookups <text>
              Append  text  to  dns  lookups.  It  is  useful for specifying fixed tor exit node.
              (default: blank)


       -only-proxies <0>/<1>
              "1" causes that Links won't initiate any non-proxy connection.  It  is  useful  for
              anonymization with tor or similar networks.


       -http-bugs.http10 <0>/<1>
              (default 0) "1" forces using only HTTP/1.0 protocol. (useful for buggy servers that
              claim to be HTTP/1.1 compliant but are not) "0" enables  using  both  HTTP/1.0  and
              HTTP/1.1.


       -http-bugs.allow-blacklist <0>/<1>
              (default  1)  "1"  defaults to using list of servers that have broken HTTP/1.1 sup‐
              port.  When links2 finds such server, it will retry the request with HTTP/1.0.


       -http-bugs.bug-302-redirect <0>/<1>
              (default 1) Process 302 redirect in a way that is  incompatible  with  RFC1945  and
              RFC2068, but the same as Netscape and MSIE. Many pages depend on it.


       -http-bugs.bug-post-no-keepalive <0>/<1>
              (default 0) No keepalive connection after post requests. For some buggy servers.


       -http-bugs.bug-no-accept-charset <0>/<1>
              (default 0) Do not send Accept-Charset field of HTTP header. Because it is too long
              some servers will deny the request. Other servers will  convert  content  to  plain
              ascii when Accept-Charset is missing.


       -http-bugs.no-compression <0>/<1>
              (default  0) "1" causes that links won't advertise HTTP compression support (but it
              will still accept compressed data). Use it when you communicate  with  server  that
              has broken compression support.


       -http-bugs.retry-internal-errors <0>/<1>
              (default 0) Retry on internal server errors (50x).


       -http.do-not-track <0>/<1>
              (default 0) Send do not track request in the HTTP header.


       -http.referer <0>/<1>/<2>/<3>/<4>
              (default  0)  0 - do not send referer.  1 - send the requested URL as referer.  2 -
              send fake referer.  3 - send real referer.  4 - send real referer only to the  same
              server.


       -http.fake-referer <string>
              Fake referer value.


       -http.fake-user-agent <string>
              Fake user agent value.


       -http.extra-header <string>
              Extra string added to HTTP header.


       -ftp.anonymous-password <string>
              Password for anonymous ftp access.


       -ftp.use-passive <0>/<1>
              Use ftp PASV command to bypass firewalls.


       -ftp.use-erpt-epsv <0>/<1>
              Use EPRT and EPSV commands instead of PORT and PASV.


       -ftp.fast <0>/<1>
              Send  more  ftp commands simultaneously. Faster response when browsing ftp directo‐
              ries, but it is incompatible with RFC and some servers don't like it.


       -ftp.set-iptos <0>/<1>
              Set IP Type-of-service to high throughput on ftp connections.


       -smb.allow-hyperlinks-to-smb <0>/<1>
              Allow hyperlinks to SMB protocol.  Disabling this improves security, because inter‐
              net sites cannot exploit possible bugs in the SMB client.


       -menu-font-size <size>
              Size of font in menu.


       -menu-background-color 0xRRGGBB
              Set menu background color in graphics mode. RRGGBB are hex.


       -menu-foreground-color 0xRRGGBB
              Set menu foreground color in graphics mode. RRGGBB are hex.


       -scroll-bar-area-color 0xRRGGBB
              Set color of scroll bar area. RRGGBB are hex.


       -scroll-bar-bar-color 0xRRGGBB
              Set color of scroll bar. RRGGBB are hex.


       -scroll-bar-frame-color 0xRRGGBB
              Set color of scroll bar frame. RRGGBB are hex.


       -bookmarks-file <file>
              File to store bookmarks.


       -bookmarks-codepage <codepage>
              Character set of bookmarks file.


       -save-url-history <0>/<1>
              Save URL history on exit.


       -display-red-gamma <fp-value>
              Red gamma of display. (default 2.2)


       -display-green-gamma <fp-value>
              Green gamma of display. (default 2.2)


       -display-blue-gamma <fp-value>
              Blue gamma of display. (default 2.2)


       -user-gamma <fp-value>
              Additional gamma. (default 1)


       -bfu-aspect <fp-value>
              Display aspect ration.


       -aspect-on <0>/<1>
              Enable aspect ratio correction.


       -dither-letters <0>/<1>
              Do letter dithering.


       -dither-images <0>/<1>
              Do image dithering.


       -display-optimize <0>/<1>/<2>
              Optimize for CRT (0), LCD RGB (1), LCD BGR (2).


       -gamma-correction <0>/<1>/<2>
              Type  of  gamma  correction: (default 2) 0 - 8-bit (fast).  1 - 16-bit (slow).  2 -
              automatically detect according to speed of FPU.


       -overwrite-instead-of-scroll <0>/<1>
              Overwrite the screen instead of scrolling it (valid for svgalib  and  framebuffer).
              Overwriting may or may not be faster, depending on hardware.


       -html-assume-codepage <codepage>
              Use the given codepage when the webpage did not specify its codepage. (default: ISO
              8859-1)


       -html-hard-assume <0>/<1>
              Use always character set from "-html-assume-codepage" no matter what server sent.


       -html-tables <0>/<1>
              Render tables. (0) causes tables being rendered like in lynx.


       -html-frames <0>/<1>
              Render frames. (0) causes frames  rendered like in lynx.


       -html-images <0>/<1>
              Display links to unnamed images as [IMG]


       -html-image-names <0>/<1>
              Display filename of an image instead of [IMG].


       -html-display-images <0>/<1>
              Display images in graphics mode.


       -html-image-scale <percent>
              Scale images in graphics mode.


       -html-bare-image-autoscale <0>/<1>
              Autoscale images displayed in full screen.


       -html-numbered-links <0>/<1>
              Number links in text mode. Allow quick link selection by  typing  link  number  and
              enter.


       -html-table-order <0>/<1>
              In text mode, walk through table by rows (0) or columns (1).


       -html-auto-refresh <0>/<1>
              Process refresh to other page (1), or display link to that page (0).


       -html-target-in-new-window <0>/<1>
              Allow opening new windows from html.


       -html-margin <number of spaces>
              Margin in text mode.


       -html-user-font-size <size>
              Size of font on pages in graphics mode.


       -html-t-text-color <0>-<15>
              Text color in text mode.


       -html-t-link-color <0>-<15>
              Link color in text mode.


       -html-t-background-color <0>-<7>
              Background color in text mode.


       -html-t-ignore-document-color <0>/<1>
              Ignore colors specified in html document in text mode.


       -html-g-text-color 0xRRGGBB
              Text color in graphics mode.


       -html-g-link-color 0xRRGGBB
              Link color in graphics mode.


       -html-g-background-color 0xRRGGBB
              Background color in graphics mode.


       -html-g-ignore-document-color <0>/<1>
              Ignore colors specified in html document in graphics mode.


       More options can be seen with links2 -h


NAVIGATION KEYS
       The keys you may use while navigating are

       ESC    menu/escape

       F9     menu

       F10    file menu

       TAB    next frame

       PGDN   page down

       Space  page down

       PGUP   page up

       b      page up

       CursorDOWN
              next link/down

       CursorUP
              prev link/up

       INS    scroll up

       ^P     scroll up

       DEL    scroll down

       ^N     scroll down

       [      scroll left

       ]      scroll right

       HOME   home

       END    end of page

       CursorRIGHT
              enter link/press button

       ENTER  enter link/press button

       CursorLEFT
              go back

       d      download link

       /      search in the page

       ?      search back in the page

       n      find next match

       N      find next match backwards

       f      zoom actual frame

       ^R     reload page

       g      go to URL

       G      edit the current URL and goto the result

       ^G     edit the current link and goto the result

       s      bookmark manager

       q      quit, close window if more windows are open

       Q      quit without asking

       =      document information

       \      toggle HTML source/rendered view


EDITING KEYS
       The following keys can be used while editing a line/jumping to a URL:

       CursorRIGHT
              move right

       CursorLEFT
              move left

       HOME   jump at the beginning

       ^A     jump at the beginning

       END    jump at the end

       ^E     jump at the end

       ^X     cut to clipboard (text mode only)

       ^B     copy to clipboard

       ^INS   copy to clipboard

       ^V     paste from clipboard (text mode only)

       ENTER  enter line

       BACKSPACE
              delete back character

       ^H     delete back character

       DEL    delete character

       ^D     delete character

       ^U     delete from beginning of the line

       ^K     delete to the end of the line

       ^W     auto complete line






FILES
       ~/.links2/links.cfg
              Per‐user configfile, automatically created by links2.

PLATFORMS
       links2  is known to work on Linux, FreeBSD, Solaris, IRIX, HPUX, Digital Unix, AIX,
       OS/2, BeOS and Win32.

BUGS
       Can't connect to some FTP servers (Novell, NT). Connection stays in "Request  sent"
       state.

       Frames  don't  work  if  there's  more frames with same name. Turn them off in such
       case.

       You can't upload large files; it takes _lots_ of memory.

       You shouldn't press '^Z' when you are in a viewer

       Please report any other  bugs  you  find  to  Mikulas  Patocka  <mikulas AT artax.kar‐
       lin.mff.cuni.cz>


LICENSE
       links2  is  free software; you can redistribute it and/or modify it under the terms
       of the GNU General Public License as published by  the  Free  Software  Foundation;
       either version 2 of the License, or (at your option) any later version.


AUTHOR
       links2 was written by Mikulas Patocka, Karel 'Clock' Kulhavy, Petr 'Brain' Kulhavy,
       and Martin 'PerM' Pergel.  See file AUTHORS for a list of  people  contributing  to
       this project.

       The homepage of links2 can be found at http://atrey.karlin.mff.cuni.cz/~clock/twib‐
       right/links

       This manual page was written by Peter Gervai <grin AT tolna.net>, using excerpts  from
       a  (yet?)  unknown  links2  fan for the Debian GNU/Linux system (but may be used by
       others). Updated by Karel Kulhavy.


SEE ALSO
       lynx(1), w3m(1)



                                            Aug, 2006                                   LINKS2(1)


/man
rootr.net - man pages