| |
rmid(1) - phpMan
rmid(1) General Commands Manual rmid(1)
Name
rmid - The Java RMI Activation System Daemon
rmid starts the activation system daemon that allows objects to be registered and acti‐
vated in a virtual machine (VM).
SYNOPSIS
rmid [options]
DESCRIPTION
The rmid tool starts the activation system daemon. The activation system daemon must be
started before activatable objects can be either registered with the activation system or
activated in a VM. See the Java RMI Specification @
http://docs.oracle.com/javase/7/docs/platform/rmi/spec/rmiTOC.html and Activation tutori‐
als @
http://docs.oracle.com/javase/7/docs/technotes/guides/rmi/activation/overview.html for
details on how to write programs that use activatable remote objects.
The daemon can be started by executing the rmid command, and specifying a security policy
file, as follows:
rmid -J-Djava.security.policy=rmid.policy
Note: When running Sun's implementation of rmid, by default you will need to specify a
security policy file so that rmid can verify whether or not the information in each Acti‐
vationGroupDesc is allowed to be used to launch a VM for an activation group. Specifi‐
cally, the command and options specified by the CommandEnvironment and any Properties
passed to an ActivationGroupDesc's constructor must now be explicitly allowed in the secu‐
rity policy file for rmid. The value of the sun.rmi.activation.execPolicy property dic‐
tates the policy that rmid uses to determine whether or not the information in an Activa‐
tionGroupDesc may be used to launch a VM for an activation group.
Executing rmid by default
o starts the Activator and an internal registry on the default port, 1098, and
o binds an ActivationSystem to the name java.rmi.activation.ActivationSystem in this
internal registry.
To specify an alternate port for the registry, you must specify the -port option when
starting up rmid. For example,
rmid -J-Djava.security.policy=rmid.policy -port 1099
starts the activation system daemon and a registry on the registry's default port, 1099.
Starting rmid from inetd/xinetd
An alternative to starting rmid from the command line is to configure inetd (Solaris) or
xinetd (Linux) to start rmid on demand.
When rmid starts up, it attempts to obtain an inherited channel (inherited from
inetd/xinetd) by invoking the System.inheritedChannel method. If the inherited channel is
null or not an instance of java.nio.channels.ServerSocketChannel, then rmid assumes that
it was not started by inetd/xinetd, and it starts up as described above.
If the inherited channel is a ServerSocketChannel instance, then rmid uses the
java.net.ServerSocket obtained from the ServerSocketChannel as the server socket that
accepts requests for the remote objects it exports, namely the registry in which the
java.rmi.activation.ActivationSystem is bound and the java.rmi.activation.Activator remote
object. In this mode, rmid behaves the same as when it is started from the command line,
except:
o Output printed to System.err is redirected to a file. This file is located in the
directory specified by the java.io.tmpdir system property (typically /var/tmp or
/tmp) with the prefix "rmid-err" and the suffix "tmp".
o The -port option is disallowed. If this option is specified, rmid will exit with an
error message.
o The -log option is required. If this option is not specified, rmid will exit with an
error message.
See the man pages for inetd (Solaris) or xinetd (Linux) for details on how to configure
services to be started on demand.
OPTIONS
-C<someCommandLineOption>
Specifies an option that is passed as a command-line argument to each child process
(activation group) of rmid when that process is created. For example, you could pass
a property to each virtual machine spawned by the activation system daemon:
rmid -C-Dsome.property=value
This ability to pass command-line arguments to child processes can be useful for
debugging. For example, the following command:
rmid -C-Djava.rmi.server.logCalls=true
will enable server-call logging in all child VMs.
-J<someCommandLineOption>
Specifies an option that is passed to the java interpreter running rmid. For exam‐
ple, to specify that rmid use a policy file named rmid.policy, the -J option can be
used to define the java.security.policy property on rmid's command line, for exam‐
ple:
rmid -J-Djava.security.policy=rmid.policy
-J-Dsun.rmi.activation.execPolicy=<policy>
Specifies the policy that rmid employs to check commands and command-line options
used to launch the VM in which an activation group runs. Please note that this
option exists only in Sun's implementation of the Java RMI activation daemon. If
this property is not specified on the command line, the result is the same as if
-J-Dsun.rmi.activation.execPolicy=default were specified. The possible values of
<policy> can be default, <policyClassName>, or none:
o default (or if this property is unspecified)
The default execPolicy allows rmid to execute commands with specific command-line
options only if rmid has been granted permission to execute those commands and
options in the security policy file that rmid uses. Only the default activation
group implementation can be used with the default execution policy.
rmid launches a VM for an activation group using the information in the group's reg‐
istered activation group descriptor, an ActivationGroupDesc. The group descriptor
specifies an optional ActivationGroupDesc.CommandEnvironment which includes the com‐
mand to execute to start the activation group as well as any command line options to
be added to the command line. By default, rmid uses the java command found in
java.home. The group descriptor also contains properties overrides that are added to
the command line as options defined as:
-D<property>=<value>
The permission com.sun.rmi.rmid.ExecPermission is used to grant rmid permission to
execute a command, specified in the group descriptor's CommandEnvironment to launch
an activation group. The permission com.sun.rmi.rmid.ExecOptionPermission is used to
allow rmid to use command-line options, specified as properties overrides in the
group descriptor or as options in the CommandEnvironment, when launching the activa‐
tion group.
When granting rmid permission to execute various commands and options, the permis‐
sions ExecPermission and ExecOptionPermission need to be granted universally (i.e.,
granted to all code sources).
ExecPermission
The ExecPermission class represents permission for rmid to execute a specific
command to launch an activation group.
Syntax
The name of an ExecPermission is the path name of a command to grant rmid permis‐
sion to execute. A path name that ends in "/*" indicates all the files contained
in that directory (where "/" is the file-separator character, File.separator‐
Char). A path name that ends with "/-" indicates all files and subdirectories
contained in that directory (recursively). A path name consisting of the special
token "<<ALL FILES>>" matches any file.
Note: A path name consisting of a single "*" indicates all the files in the cur‐
rent directory, while a path name consisting of a single "-" indicates all the
files in the current directory and (recursively) all files and subdirectories
contained in the current directory.
ExecOptionPermission
The ExecOptionPermission class represents permission for rmid to use a spe‐
cific command-line option when launching an activation group. The name of an
ExecOptionPermission is the value of a command line option.
Syntax
Options support a limited wildcard scheme. An asterisk signifies a wildcard
match, and it may appear as the option name itself (i.e., it matches any option),
or an asterisk may appear at the end of the option name only if the asterisk fol‐
lows either a "." or "=".
For example: "*" or "-Dfoo.*" or "-Da.b.c=*" is valid, "*foo" or "-Da*b" or "ab*"
is not.
Policy file for rmid
When granting rmid permission to execute various commands and options, the
permissions ExecPermission and ExecOptionPermission need to be granted univer‐
sally (i.e., granted to all code sources). It is safe to grant these permis‐
sions universally because only rmid checks these permissions.
An example policy file that grants various execute permissions to rmid is:
grant {
permission com.sun.rmi.rmid.ExecPermission
"/files/apps/java/jdk1.7.0/solaris/bin/java";
permission com.sun.rmi.rmid.ExecPermission
"/files/apps/rmidcmds/*";
permission com.sun.rmi.rmid.ExecOptionPermission
"-Djava.security.policy=/files/policies/group.policy";
permission com.sun.rmi.rmid.ExecOptionPermission
"-Djava.security.debug=*";
permission com.sun.rmi.rmid.ExecOptionPermission
"-Dsun.rmi.*";
};
The first permission granted allow rmid to execute the 1.7.0 version of the java
command, specified by its explicit path name. Note that by default, the version
of the java command found in java.home is used (the same one that rmid uses), and
does not need to be specified in the policy file. The second permission allows
rmid to execute any command in the directory /files/apps/rmidcmds.
The third permission granted, an ExecOptionPermission, allows rmid to launch an
activation group that defines the security policy file to be /files/poli‐
cies/group.policy. The next permission allows the java.security.debug property to
be used by an activation group. The last permission allows any property in the
sun.rmi property name hierarchy to be used by activation groups.
To start rmid with a policy file, the java.security.policy property needs to be
specified on rmid's command line, for example:
rmid -J-Djava.security.policy=rmid.policy
o <policyClassName>
If the default behavior is not flexible enough, an administrator can provide, when
starting rmid, the name of a class whose checkExecCommand method is executed in
order to check commands to be executed by rmid.
The policyClassName specifies a public class with a public, no-argument constructor
and an implementation of the following checkExecCommand method:
public void checkExecCommand(ActivationGroupDesc desc,
String[] command)
throws SecurityException;
Before launching an activation group, rmid calls the policy's checkExecCommand
method, passing it the activation group descriptor and an array containing the com‐
plete command to launch the activation group. If the checkExecCommand throws a Secu‐
rityException, rmid will not launch the activation group and an ActivationException
will be thrown to the caller attempting to activate the object.
o none
If the sun.rmi.activation.execPolicy property value is "none", then rmid will not
perform any validation of commands to launch activation groups.
-log dir
Specifies the name of the directory the activation system daemon uses to write its
database and associated information. The log directory defaults to creating a direc‐
tory, log, in the directory in which the rmid command was executed.
-port port
Specifies the port rmid's registry uses. The activation system daemon binds the
ActivationSystem, with the name java.rmi.activation.ActivationSystem, in this reg‐
istry. Thus, the ActivationSystem on the local machine can be obtained using the
following Naming.lookup method call:
import java.rmi.*;
import java.rmi.activation.*;
ActivationSystem system; system = (ActivationSystem)
Naming.lookup("//:port/java.rmi.activation.ActivationSystem");
-stop
Stops the current invocation of rmid, for a port specified by the -port option. If
no port is specified, it will stop the rmid running on port 1098.
ENVIRONMENT VARIABLES
CLASSPATH
Used to provide the system a path to user-defined classes. Directories are separated
by colons. For example:
.:/usr/local/java/classes
SEE ALSO
rmic(1), CLASSPATH @
http://docs.oracle.com/javase/7/docs/technotes/tools/index.html#classpath, java(1)
16 Mar 2012 rmid(1)
|
