wget (1)             - The non-interactive network downloader.
__audit_getname (9)  - add a name to the list
__audit_mq_getsetattr (9) - record audit data for a POSIX MQ get/set attribute
__dev_get_by_flags (9) - find any device with given flags
__dev_get_by_index (9) - find a device by its ifindex
__dev_get_by_name (9) - find a device by its name
__get_pfnblock_flags_mask (9) - Return the requested group of flags for the p...
__get_request (9)    - get a free request
__hrtimer_get_remaining (9) - get remaining time for the timer
__lock_page (9)      - get a lock on the page, assuming we need to sleep to g...
__scsi_device_lookup_by_target (9) - find a device given the target (UNLOCKED)
__starget_for_each_device (9) - helper to walk all devices of a target (UNLOC...
acpi_get_dma_attr (9) - Check the supported DMA attr for the specified device.
addmntent (3)        - get filesystem descriptor file entry
agetty (8)           - alternative Linux getty
aica_rtc_gettimeofday (9) - Get the time from the AICA RTC
aio_error (3)        - get error status of asynchronous I/O operation
aio_return (3)       - get return status of asynchronous I/O operation
apt-get (8)          - APT package handling utility - - command-line interface
ata_get_identity (9) - Handler for HDIO_GET_IDENTITY ioctl
ata_get_xlat_func (9) - check if SCSI to ATA translation is possible
ata_scsi_rbuf_get (9) - Map response buffer.
attributes (3perl)   - get/set subroutine or variable attributes
auditsc_get_stamp (9) - get local copies of audit_context values
autopoint (1)        - copies standard gettext infrastructure
avc_get_initial_context (3) - obtain and manipulate SELinux security ID's
avc_get_initial_sid (3) - obtain and manipulate SELinux security ID's
axfr-get (8)         - a DNS zone-transfer client.
bdev_direct_access (9) - Get the address for directly-accessibly memory
bdget_disk (9)       - do bdget by gendisk and partition number
bind9-config (1)     - Get information about the installed version of ISC BIND
BIO_ctrl_get_read_request (3ssl) - BIO pair BIO
BIO_ctrl_get_write_guarantee (3ssl) - BIO pair BIO
BIO_get_accept_port (3ssl) - accept BIO
BIO_get_bind_mode (3ssl) - accept BIO
BIO_get_callback (3ssl) - BIO callback functions
BIO_get_callback_arg (3ssl) - BIO callback functions
BIO_get_cipher_ctx (3ssl) - cipher BIO filter
BIO_get_cipher_status (3ssl) - cipher BIO filter
BIO_get_close (3ssl) - BIO control operations
BIO_get_conn_hostname (3ssl) - connect BIO
BIO_get_conn_int_port (3ssl) - connect BIO
BIO_get_conn_ip (3ssl) - connect BIO
BIO_get_conn_port (3ssl) - connect BIO
BIO_get_fd (3ssl)    - file descriptor BIO
BIO_get_fp (3ssl)    - FILE bio
BIO_get_info_callback (3ssl) - BIO control operations
BIO_get_md (3ssl)    - message digest BIO filter
BIO_get_md_ctx (3ssl) - message digest BIO filter
BIO_get_mem_data (3ssl) - memory BIO
BIO_get_mem_ptr (3ssl) - memory BIO
BIO_get_num_renegotiates (3ssl) - SSL BIO
BIO_get_read_request (3ssl) - BIO pair BIO
BIO_get_retry_BIO (3ssl) - BIO retry functions
BIO_get_retry_reason (3ssl) - BIO retry functions
BIO_get_ssl (3ssl)   - SSL BIO
BIO_get_write_buf_size (3ssl) - BIO pair BIO
BIO_get_write_guarantee (3ssl) - BIO pair BIO
BIO_gets (3ssl)      - BIO I/O functions
blk_get_backing_dev_info (9) - get the address of a queue's backing_dev_info
blkdev_get (9)       - open a block device
blkdev_get_by_dev (9) - open a block device by device number
blkdev_get_by_path (9) - open a block device by name
BN_BLINDING_get_flags (3ssl) - blinding related BIGNUM functions.
BN_BLINDING_get_thread_id (3ssl) - blinding related BIGNUM functions.
BN_CTX_get (3ssl)    - use temporary BIGNUM variables
BN_get_word (3ssl)   - BIGNUM assignment operations
BN_num_bits (3ssl)   - get BIGNUM size
BN_num_bits_word (3ssl) - get BIGNUM size
BN_num_bytes (3ssl)  - get BIGNUM size
btrfs-property (8)   - get/set/list properties for given btrfs object.
capget (2)           - set/get capabilities of thread(s)
capset (2)           - set/get capabilities of thread(s)
catgets (3)          - get message from a message catalog
ccw_device_get_chp_desc (9) - return newly allocated channel-path descriptor
ccw_device_get_ciw (9) - Search for CIW command in extended sense data.
ccw_device_get_id (9) - obtain a ccw device id
ccw_device_get_mdc (9) - accumulate max data count
ccw_device_get_path_mask (9) - get currently available paths
ccw_device_get_schid (9) - obtain a subchannel id
cfgetispeed (3)      - get and set terminal attributes, line control, get and...
cfgetospeed (3)      - get and set terminal attributes, line control, get and...
cfmakeraw (3)        - get and set terminal attributes, line control, get and...
cfsetispeed (3)      - get and set terminal attributes, line control, get and...
cfsetospeed (3)      - get and set terminal attributes, line control, get and...
cfsetspeed (3)       - get and set terminal attributes, line control, get and...
cgget (1)            - print parameter(s) of given group(s)
cimag (3)            - get imaginary part of a complex number
cimagf (3)           - get imaginary part of a complex number
cimagl (3)           - get imaginary part of a complex number
Class::Container (3pm) - Glues object frameworks together transparently
Class::Inspector (3pm) - Get information about a class and its structure
Class::Inspector::Functions (3pm) - Get information about a class and its str...
clk_get (9)          - lookup and obtain a reference to a clock producer.
clk_get_accuracy (9) - obtain the clock accuracy in ppb (parts per billion) f...
clk_get_parent (9)   - get the parent clock source for this clock
clk_get_phase (9)    - return the phase shift of a clock signal
clk_get_rate (9)     - obtain the current clock rate (in Hz) for a clock sour...
clk_get_sys (9)      - get a clock based upon the device name
clnt_geterr (3)      - library routines for remote procedure calls
clock_getcpuclockid (3) - obtain ID of a process CPU-time clock
clock_getres (2)     - clock and time functions
clock_getres (3)     - clock and time functions
clock_gettime (2)    - clock and time functions
clock_gettime (3)    - clock and time functions
CMS_get0_content (3ssl) - get and set CMS content types and content
CMS_get0_eContentType (3ssl) - get and set CMS content types and content
CMS_get0_RecipientInfos (3ssl) - CMS envelopedData RecipientInfo routines
CMS_get0_SignerInfos (3ssl) - CMS signedData signer functions.
CMS_get0_type (3ssl) - get and set CMS content types and content
CMS_get1_certs (3ssl) - CMS certificate and CRL utility functions
CMS_get1_crls (3ssl) - CMS certificate and CRL utility functions
CMS_get1_ReceiptRequest (3ssl) - CMS signed receipt request functions.
CMS_ReceiptRequest_get0_values (3ssl) - CMS signed receipt request functions.
CMS_RecipientInfo_kekri_get0_id (3ssl) - CMS envelopedData RecipientInfo rout...
CMS_RecipientInfo_ktri_get0_signer_id (3ssl) - CMS envelopedData RecipientInf...
CMS_set1_eContentType (3ssl) - get and set CMS content types and content
CMS_SignerInfo_get0_signer_id (3ssl) - CMS signedData signer functions.
config_ep_by_speed (9) - configures the given endpoint according to gadget sp...
confstr (3)          - get configuration dependent string variables
context_range_get (3) - Routines to manipulate SELinux security contexts
context_role_get (3) - Routines to manipulate SELinux security contexts
context_type_get (3) - Routines to manipulate SELinux security contexts
context_user_get (3) - Routines to manipulate SELinux security contexts
CPAN::Mirrors (3perl) - Get CPAN mirror information and select a fast one
creal (3)            - get real part of a complex number
crealf (3)           - get real part of a complex number
creall (3)           - get real part of a complex number
crypto_akcipher_maxsize (9) - Get len for output buffer
crypto_blkcipher_get_iv (9) - obtain IV from cipher
CRYPTO_get_ex_data (3ssl) - internal application specific data functions
CRYPTO_get_new_dynlockid (3ssl) - OpenSSL thread support
crypto_rng_generate (9) - get random number
crypto_rng_get_bytes (9) - get random number
CRYPTO_THREADID_get_callback (3ssl) - OpenSSL thread support
ctermid (3)          - get controlling terminal name
cuserid (3)          - get username
Cwd (3perl)          - get pathname of current working directory
d_backing_dentry (9) - Get upper or lower dentry we should be using
d_backing_inode (9)  - Get upper or lower inode we should be using
d_inode (9)          - Get the actual inode of this dentry
d_inode_rcu (9)      - Get the actual inode of this dentry with ACCESS_ONCE
DBI::Const::GetInfo::ANSI (3pm) - ISO/IEC SQL/CLI Constants for GetInfo
DBI::Const::GetInfo::ODBC (3pm) - ODBC Constants for GetInfo
DBI::Const::GetInfoReturn (3pm) - Data and functions for describing GetInfo r...
DBI::Const::GetInfoType (3pm) - Data describing GetInfo type codes
dblink_error_message (3) - gets last error message on the named connection
dblink_get_connections (3) - returns the names of all open named dblink conne...
dblink_get_notify (3) - retrieve async notifications on a connection
dblink_get_pkey (3)  - returns the positions and field names of a relation's ...
dblink_get_result (3) - gets an async query result
dcgettext (3)        - translate message
dcngettext (3)       - translate message and choose plural form
debconf-gettextize (1) - extract translations of debconf templates into PO files
dev_get_by_index (9) - find a device by its ifindex
dev_get_by_index_rcu (9) - find a device by its ifindex
dev_get_by_name (9)  - find a device by its name
dev_get_by_name_rcu (9) - find a device by its name
dev_get_flags (9)    - get flags reported to userspace
dev_get_iflink (9)   - get 'iflink' value of a interface
dev_get_phys_port_id (9) - Get device physical port ID
dev_get_phys_port_name (9) - Get device physical port name
dev_get_stats (9)    - get network device statistics
dev_getbyhwaddr_rcu (9) - find a device by its hardware address
dev_hold (9)         - get reference to device
devm_clk_get (9)     - lookup and obtain a managed reference to a clock produ...
devm_get_free_pages (9) - Resource-managed __get_free_pages
devm_of_pwm_get (9)  - resource managed of_pwm_get
devm_pwm_get (9)     - resource managed pwm_get
devres_get (9)       - Find devres, if non-existent, add one atomically
dget_dlock (9)       - get a reference to a dentry
dgettext (3)         - translate message
DH_get_default_method (3ssl) - select DH method
DH_get_ex_data (3ssl) - add application specific data to DH structures
DH_get_ex_new_index (3ssl) - add application specific data to DH structures
DH_size (3ssl)       - get Diffie-Hellman prime size
dirfd (3)            - get directory stream file descriptor
disk_get_part (9)    - get partition
dma_buf_get (9)      - returns the dma_buf structure related to an fd
dma_pool_alloc (9)   - get a block of consistent memory
dmi_get_date (9)     - parse a DMI date
dmi_get_system_info (9) - return DMI data value
dmi_walk (9)         - Walk the DMI table and get called back for every record
dngettext (3)        - translate message and choose plural form
dpkg-repack (1)      - put an unpacked .deb file back together
Dpkg::Gettext (3)    - convenience wrapper around Locale::gettext
Dpkg::Vendor (3)     - get access to some vendor specific information
DSA_get_default_method (3ssl) - select DSA method
DSA_get_ex_data (3ssl) - add application specific data to DSA structures
DSA_get_ex_new_index (3ssl) - add application specific data to DSA structures
DSA_size (3ssl)      - get DSA signature size
dysize (3)           - get number of days for a given year
edd_get_pci_dev (9)  - finds pci_dev that matches edev
endgrent (3)         - get group file entry
endhostent (3)       - get network host entry
endmntent (3)        - get filesystem descriptor file entry
endnetent (3)        - get network entry
endprotoent (3)      - get protocol entry
endpwent (3)         - get password file entry
endrpcent (3)        - get RPC entry
endservent (3)       - get service entry
endspent (3)         - get shadow password file entry
endttyent (3)        - get ttys file entry
endusershell (3)     - get permitted user shells
envz_get (3)         - environment string support
ERR_get_error (3ssl) - obtain error code and data
ERR_get_error_line (3ssl) - obtain error code and data
ERR_get_error_line_data (3ssl) - obtain error code and data
ERR_GET_FUNC (3ssl)  - get library, function and reason code
ERR_GET_LIB (3ssl)   - get library, function and reason code
ERR_get_next_error_library (3ssl) - load arbitrary error strings
ERR_GET_REASON (3ssl) - get library, function and reason code
eth_get_headlen (9)  - determine the length of header for an ethernet frame
eventfd_ctx_fdget (9) - Acquires a reference to the internal eventfd context.
eventfd_ctx_fileget (9) - Acquires a reference to the internal eventfd context.
eventfd_ctx_get (9)  - Acquires a reference to the internal eventfd context.
eventfd_fget (9)     - Acquire a reference of an eventfd file descriptor.
EVP_CIPHER_CTX_get_app_data (3ssl) - EVP cipher routines
EVP_get_cipherbyname (3ssl) - EVP cipher routines
EVP_get_cipherbynid (3ssl) - EVP cipher routines
EVP_get_cipherbyobj (3ssl) - EVP cipher routines
EVP_get_digestbyname (3ssl) - EVP digest routines
EVP_get_digestbynid (3ssl) - EVP digest routines
EVP_get_digestbyobj (3ssl) - EVP digest routines
EVP_PKEY_CTX_get_app_data (3ssl) - key and parameter generation functions
EVP_PKEY_CTX_get_cb (3ssl) - key and parameter generation functions
EVP_PKEY_CTX_get_keygen_info (3ssl) - key and parameter generation functions
EVP_PKEY_get1_DH (3ssl) - EVP_PKEY assignment functions.
EVP_PKEY_get1_DSA (3ssl) - EVP_PKEY assignment functions.
EVP_PKEY_get1_EC_KEY (3ssl) - EVP_PKEY assignment functions.
EVP_PKEY_get1_RSA (3ssl) - EVP_PKEY assignment functions.
EVP_PKEY_get_default_digest (3ssl) - get default signature digest
EVP_PKEY_get_default_digest_nid (3ssl) - get default signature digest
fb_default_cmap (9)  - get default colormap
fc_get_event_number (9) - Obtain the next sequential FC event number
fcntl_getlease (9)   - Enquire what lease is currently active
fegetenv (3)         - floating-point rounding and exception handling
fegetexcept (3)      - floating-point rounding and exception handling
fegetexceptflag (3)  - floating-point rounding and exception handling
fegetround (3)       - floating-point rounding and exception handling
fence_default_wait (9) - default sleep until the fence gets signaled or until...
fence_get (9)        - increases refcount of the fence
fence_get_rcu (9)    - get a fence from a reservation_object_list with rcu re...
fence_wait (9)       - sleep until the fence gets signaled
fence_wait_any_timeout (9) - sleep until any fence gets signaled or until tim...
fence_wait_timeout (9) - sleep until the fence gets signaled or until timeout...
fgetc (3)            - input of characters and strings
fgetc_unlocked (3)   - nonlocking stdio functions
fgetfilecon (3)      - get SELinux security context of a file
fgetfilecon_raw (3)  - get SELinux security context of a file
fgetgrent (3)        - get group file entry
fgetgrent_r (3)      - get group file entry reentrantly
fgetpos (3)          - reposition a stream
fgetpwent (3)        - get password file entry
fgetpwent_r (3)      - get passwd file entry reentrantly
fgets (3)            - input of characters and strings
fgets_unlocked (3)   - nonlocking stdio functions
fgetspent (3)        - get shadow password file entry
fgetspent_r (3)      - get shadow password file entry
fgetwc (3)           - read a wide character from a FILE stream
fgetwc_unlocked (3)  - nonlocking stdio functions
fgetws (3)           - read a wide-character string from a FILE stream
fgetws_unlocked (3)  - nonlocking stdio functions
find_get_entries_tag (9) - find and return entries that match tag
find_get_entry (9)   - find and get a page cache entry
find_get_pages_contig (9) - gang contiguous pagecache lookup
find_get_pages_tag (9) - find and return pages that match tag
finger@ (1)          - gets user information from a remote host.
fpathconf (3)        - get configuration values for files
freecon (3)          - get SELinux security context of a process
freeconary (3)       - get SELinux security context of a process
freehostent (3)      - get network hostnames and addresses
freeifaddrs (3)      - get interface addresses
freq_reg_info (9)    - get regulatory information for the given frequency
fstat (2)            - get file status
fstat64 (2)          - get file status
fstatat (2)          - get file status
fstatat64 (2)        - get file status
fstatfs (2)          - get filesystem statistics
fstatfs64 (2)        - get filesystem statistics
fstatvfs (2)         - get filesystem statistics
fstatvfs (3)         - get filesystem statistics
gadget_is_altset_supported (9) - return true iff the hardware supports altset...
gadget_is_dualspeed (9) - return true iff the hardware handles high speed
gadget_is_otg (9)    - return true iff the hardware is OTG-ready
gadget_is_stall_supported (9) - return true iff the hardware supports stalling
gadget_is_superspeed (9) - return true if the hardware handles superspeed
gadget_is_superspeed_plus (9) - return true if the hardware handles superspee...
gadget_is_zlp_supported (9) - return true iff the hardware supports zlp
gai.conf (5)         - getaddrinfo(3) configuration file
generic_pipe_buf_get (9) - get a reference to a struct pipe_buffer
GET (1p)             - Simple command line user agent
get_ccwdev_by_busid (9) - obtain device from a bus id
get_ccwdev_by_dev_id (9) - obtain device from a ccw device id
getcwd (2)           - get current working directory
get_current_dir_name (3) - get current working directory
get_default_context (3) - determine SELinux context(s) for user sessions
get_default_context_with_level (3) - determine SELinux context(s) for user se...
get_default_context_with_role (3) - determine SELinux context(s) for user ses...
get_default_context_with_rolelevel (3) - determine SELinux context(s) for use...
query_user_context (3) - determine SELinux context(s) for user sessions
get_default_type (3) - determine SELinux context(s) for user sessions
get_device (9)       - increment reference count for device.
get_dma_buf (9)      - convenience wrapper for get_file.
get_futex_key (9)    - Get parameters which are the keys for a futex
get_gendisk (9)      - get partitioning information for a given device
get_kernel_syms (2)  - retrieve exported kernel and module symbols
get_mempolicy (2)    - retrieve NUMA memory policy for a process
get_myaddress (3)    - library routines for remote procedure calls
get_nprocs (3)       - get number of processors
get_nprocs_conf (3)  - get number of processors
get_option (9)       - Parse integer from an option string
get_options (9)      - Parse a string into a list of integers
get_ordered_context_list (3) - determine SELinux context(s) for user sessions
get_ordered_context_list_with_level (3) - determine SELinux context(s) for us...
getpcaps (1)         - List Process Capabilities
get_pfn_range_for_nid (9) - Return the start and end page frames for a node
get_phy_c45_ids (9)  - reads the specified addr for its 802.3-c45 IDs.
get_phy_device (9)   - reads the specified PHY device and returns its phy_dev...
get_phy_id (9)       - reads the specified addr for its ID.
get_request (9)      - get a free request
get_robust_list (2)  - get/set list of robust futexes
get_sd_load_idx (9)  - Obtain the load index for a given sched domain.
get_state_synchronize_rcu (9) - Snapshot current RCU state
get_state_synchronize_sched (9) - Snapshot current RCU-sched state
get_super (9)        - get the superblock of a device
get_super_thawed (9) - get thawed superblock of a device
get_thread_area (2)  - get a thread-local storage (TLS) area
get_user_pages_fast (9) - pin user pages in memory
getaddrinfo (3)      - network address and service translation
getaddrinfo_a (3)    - asynchronous network address and service translation
getauxval (3)        - retrieve a value from the auxiliary vector
getc (3)             - input of characters and strings
getc_unlocked (3)    - nonlocking stdio functions
getcap (8)           - examine file capabilities
getchar (3)          - input of characters and strings
getchar_unlocked (3) - nonlocking stdio functions
getcon (3)           - get SELinux security context of a process
getcon_raw (3)       - get SELinux security context of a process
getconf (1)          - Query system configuration variables
getcontext (2)       - get or set the user context
getcontext (3)       - get or set the user context
getcpu (2)           - determine CPU and NUMA node on which the calling threa...
getcwd (3)           - get current working directory
getdate (3)          - convert a date-plus-time string to broken-down time
getdate_err (3)      - convert a date-plus-time string to broken-down time
getdate_r (3)        - convert a date-plus-time string to broken-down time
getdelim (3)         - delimited string input
getdents (2)         - get directory entries
getdents64 (2)       - get directory entries
getdirentries (3)    - get directory entries in a filesystem-independent format
getdomainname (2)    - get/set NIS domain name
getdtablesize (2)    - get descriptor table size
getdtablesize (3)    - get descriptor table size
getegid (2)          - get group identity
getegid32 (2)        - get group identity
getent (1)           - get entries from Name Service Switch libraries
getenv (3)           - get an environment variable
geteuid (2)          - get user identity
geteuid32 (2)        - get user identity
getexeccon (3)       - get or set the SELinux security context used for execu...
getexeccon_raw (3)   - get or set the SELinux security context used for execu...
getfacl (1)          - get file access control lists
getfilecon (3)       - get SELinux security context of a file
getfilecon_raw (3)   - get SELinux security context of a file
getfscreatecon (3)   - get or set the SELinux security context used for creat...
getfscreatecon_raw (3) - get or set the SELinux security context used for cre...
getfsent (3)         - handle fstab entries
getfsfile (3)        - handle fstab entries
getfsspec (3)        - handle fstab entries
getgid (2)           - get group identity
getgid32 (2)         - get group identity
getgrent (3)         - get group file entry
getgrent_r (3)       - get group file entry reentrantly
getgrgid (3)         - get group file entry
getgrgid_r (3)       - get group file entry
getgrnam (3)         - get group file entry
getgrnam_r (3)       - get group file entry
getgrouplist (3)     - get list of groups to which a user belongs
getgroups (2)        - get/set list of supplementary group IDs
getgroups32 (2)      - get/set list of supplementary group IDs
gethostbyaddr (3)    - get network host entry
gethostbyaddr_r (3)  - get network host entry
gethostbyname (3)    - get network host entry
gethostbyname2 (3)   - get network host entry
gethostbyname2_r (3) - get network host entry
gethostbyname_r (3)  - get network host entry
gethostent (3)       - get network host entry
gethostent_r (3)     - get network host entry
gethostid (2)        - get or set the unique identifier of the current host
gethostid (3)        - get or set the unique identifier of the current host
gethostname (2)      - get/set hostname
getifaddrs (3)       - get interface addresses
GetIocFacts (9)      - Send IOCFacts request to MPT adapter.
GetIoUnitPage2 (9)   - Retrieve BIOS version and boot order information.
getipnodebyaddr (3)  - get network hostnames and addresses
getipnodebyname (3)  - get network hostnames and addresses
getitimer (2)        - get or set value of an interval timer
getkeycodes (8)      - print kernel scancode-to-keycode mapping table
getkeycreatecon (3)  - get or set the SELinux security context used for creat...
getkeycreatecon_raw (3) - get or set the SELinux security context used for cr...
GetLanConfigPages (9) - Fetch LANConfig pages.
getline (3)          - delimited string input
getloadavg (3)       - get system load averages
getlogin (3)         - get username
getlogin_r (3)       - get username
getmntent (3)        - get filesystem descriptor file entry
getmntent_r (3)      - get filesystem descriptor file entry
getmsg (2)           - unimplemented system calls
getnameinfo (3)      - address-to-name translation in protocol-independent ma...
getnetbyaddr (3)     - get network entry
getnetbyaddr_r (3)   - get network entry (reentrant)
getnetbyname (3)     - get network entry
getnetbyname_r (3)   - get network entry (reentrant)
getnetent (3)        - get network entry
getnetent_r (3)      - get network entry (reentrant)
getopt (1)           - parse command options (enhanced)
getopt (3)           - Parse command-line options
Getopt::Std (3perl)  - Process single-character switches with switch clustering
Getopt::Long (3perl) - Extended processing of command line options
getopt_long (3)      - Parse command-line options
getopt_long_only (3) - Parse command-line options
getpagesize (2)      - get memory page size
getpass (3)          - get a password
getpeercon (3)       - get SELinux security context of a process
getpeercon_raw (3)   - get SELinux security context of a process
getpeername (2)      - get name of connected peer socket
getpgid (2)          - set/get process group
getpgrp (2)          - set/get process group
getpid (2)           - get process identification
getpidcon (3)        - get SELinux security context of a process
getpidcon_raw (3)    - get SELinux security context of a process
getpmsg (2)          - unimplemented system calls
GetPortFacts (9)     - Send PortFacts request to MPT adapter.
getppid (2)          - get process identification
getprevcon (3)       - get SELinux security context of a process
getprevcon_raw (3)   - get SELinux security context of a process
getpriority (2)      - get/set program scheduling priority
getprotobyname (3)   - get protocol entry
getprotobyname_r (3) - get protocol entry (reentrant)
getprotobynumber (3) - get protocol entry
getprotobynumber_r (3) - get protocol entry (reentrant)
getprotoent (3)      - get protocol entry
getprotoent_r (3)    - get protocol entry (reentrant)
getpt (3)            - open the pseudoterminal master (PTM)
getpw (3)            - reconstruct password line entry
getpwent (3)         - get password file entry
getpwent_r (3)       - get passwd file entry reentrantly
getpwnam (3)         - get password file entry
getpwnam_r (3)       - get password file entry
getpwuid (3)         - get password file entry
getpwuid_r (3)       - get password file entry
getresgid (2)        - get real, effective and saved user/group IDs
getresgid32 (2)      - get real, effective and saved user/group IDs
getresuid (2)        - get real, effective and saved user/group IDs
getresuid32 (2)      - get real, effective and saved user/group IDs
getrlimit (2)        - get/set resource limits
getrpcbyname (3)     - get RPC entry
getrpcbyname_r (3)   - get RPC entry (reentrant)
getrpcbynumber (3)   - get RPC entry
getrpcbynumber_r (3) - get RPC entry (reentrant)
getrpcent (3)        - get RPC entry
getrpcent_r (3)      - get RPC entry (reentrant)
getrpcport (3)       - get RPC port number
getrusage (2)        - get resource usage
gets (3)             - get a string from standard input (DEPRECATED)
getservbyname (3)    - get service entry
getservbyname_r (3)  - get service entry (reentrant)
getservbyport (3)    - get service entry
getservbyport_r (3)  - get service entry (reentrant)
getservent (3)       - get service entry
getservent_r (3)     - get service entry (reentrant)
getseuserbyname (3)  - get SELinux username and level for a given Linux username
getsid (2)           - get session ID
getsockcreatecon (3) - get or set the SELinux security context used for creat...
getsockcreatecon_raw (3) - get or set the SELinux security context used for c...
getsockname (2)      - get socket name
getsockopt (2)       - get and set options on sockets
getspent (3)         - get shadow password file entry
getspent_r (3)       - get shadow password file entry
getspnam (3)         - get shadow password file entry
getspnam_r (3)       - get shadow password file entry
getsubopt (3)        - parse suboption arguments from a string
gettext (1)          - translate message
gettext (3)          - translate message
gettextize (1)       - install or upgrade gettext infrastructure
gettid (2)           - get thread identification
gettimeofday (2)     - get / set time
getttyent (3)        - get ttys file entry
getttynam (3)        - get ttys file entry
getty (8)            - alternative Linux getty
getuid (2)           - get user identity
getuid32 (2)         - get user identity
getumask (3)         - get file creation mask
getunwind (2)        - copy the unwind data to caller's buffer
getusershell (3)     - get permitted user shells
getutent (3)         - access utmp file entries
getutent_r (3)       - access utmp file entries
getutid (3)          - access utmp file entries
getutid_r (3)        - access utmp file entries
getutline (3)        - access utmp file entries
getutline_r (3)      - access utmp file entries
getutmp (3)          - copy utmp structure to utmpx, and vice versa
getutmpx (3)         - copy utmp structure to utmpx, and vice versa
getutxent (3)        - access utmp file entries
getutxid (3)         - access utmp file entries
getutxline (3)       - access utmp file entries
getw (3)             - input and output of words (ints)
getwc (3)            - read a wide character from a FILE stream
getwc_unlocked (3)   - nonlocking stdio functions
getwchar (3)         - read a wide character from standard input
getwchar_unlocked (3) - nonlocking stdio functions
getwd (3)            - get current working directory
git-config (1)       - Get and set repository or global options
git-get-tar-commit-id (1) - Extract commit ID from an archive created using g...
git-merge (1)        - Join two or more development histories together
git-mergetool (1)    - Run merge conflict resolution tools to resolve merge c...
git-mergetool--lib (1) - Common Git merge tool shell scriptlets
git-subtree (1)      - Merge subtrees together and split repository into subt...
Git::I18N (3pm)      - Perl interface to Git's Gettext localizations
gnu_get_libc_release (3) - get glibc version and release
gnu_get_libc_version (3) - get glibc version and release
h_errno (3)          - get network host entry
hasmntopt (3)        - get filesystem descriptor file entry
hdparm (8)           - get/set SATA/IDE device parameters
herror (3)           - get network host entry
hsi_get_channel_id_by_name (9) - acquire channel id by channel name
hsi_id (9)           - Get HSI controller ID associated to a client
hsi_port_id (9)      - Gets the port number a client is attached to
hstrerror (3)        - get network host entry
HTML::Mason::MethodMaker (3pm) - Used to create simple get & get/set methods ...
http@ (1)            - gets a web page from a remote host.
i2c_lock_bus (9)     - Get exclusive access to an I2C bus segment
i2c_new_secondary_device (9) - Helper to get the instantiated secondary addre...
i2c_parse_fw_timings (9) - get I2C related timing parameters from firmware
ida_get_new_above (9) - allocate new ID above or equal to a start id
ida_pre_get (9)      - reserve resources for ida allocation
ida_simple_get (9)   - get a new id.
idr_get_next (9)     - lookup next object of id to given id.
ieee80211_beacon_get (9) - beacon generation function
ieee80211_bss_get_ie (9) - find IE with given ID
ieee80211_ctstoself_duration (9) - Get the duration field for a CTS-to-self f...
ieee80211_ctstoself_get (9) - CTS-to-self frame generation function
ieee80211_get_assoc_led_name (9) - get name of association LED
ieee80211_get_buffered_bc (9) - accessing buffered broadcast and multicast fr...
ieee80211_get_channel (9) - get channel struct from wiphy for specified frequ...
ieee80211_get_hdrlen_from_skb (9) - get header length from data
ieee80211_get_radio_led_name (9) - get name of radio LED
ieee80211_get_response_rate (9) - get basic rate for a given rate
ieee80211_get_rx_led_name (9) - get name of RX LED
ieee80211_get_tkip_p1k (9) - get a TKIP phase 1 key
ieee80211_get_tkip_p1k_iv (9) - get a TKIP phase 1 key for IV32
ieee80211_get_tkip_p2k (9) - get a TKIP phase 2 key
ieee80211_get_tx_led_name (9) - get name of TX LED
ieee80211_hdrlen (9) - get header length in bytes from frame control
ieee80211_rts_duration (9) - Get the duration field for an RTS frame
ieee80211_rts_get (9) - RTS frame generation function
if_freenameindex (3) - get network interface names and indexes
if_nameindex (3)     - get network interface names and indexes
iget5_locked (9)     - obtain an inode from a mounted file system
iget_failed (9)      - Mark an under-construction inode as dead and release it
iget_locked (9)      - obtain an inode from a mounted file system
iio_buffer_get (9)   - Grab a reference to the buffer
ilogb (3)            - get integer exponent of a floating-point value
ilogbf (3)           - get integer exponent of a floating-point value
ilogbl (3)           - get integer exponent of a floating-point value
input_get_keycode (9) - retrieve keycode currently mapped to a given scancode
input_get_new_minor (9) - allocates a new input minor number
input_mt_get_slot_by_key (9) - return slot matching key
io_getevents (2)     - read asynchronous I/O events from the completion queue
ionice (1)           - set or get process I/O scheduling class and priority
ioprio_get (2)       - get/set I/O scheduling class and priority
ioprio_set (2)       - get/set I/O scheduling class and priority
ipc_get_maxid (9)    - get the last assigned id
ipcget (9)           - Common sys_*get code
ipcget_new (9)       - create a new ipc object
ipcget_public (9)    - get an ipc object or create a new one
irq_chip_pm_get (9)  - Enable power for an IRQ chip
irq_get_domain_generic_chip (9) - Get a pointer to the generic chip of a hw_irq
irq_get_irqchip_state (9) - returns the irqchip state of a interrupt.
irq_get_next_irq (9) - get next allocated irq number
isc-config.sh (1)    - Get information about the installed version of ISC BIND
iscsi_discovery (8)  - discover iSCSI targets
iunique (9)          - get a unique inode number
jbd2_journal_forget (9) - bforget for potentially-journaled buffers.
jbd2_journal_get_create_access (9) - notify intent to use newly created bh
jbd2_journal_get_undo_access (9) - Notify intent to modify metadata with non-...
jbd2_journal_get_write_access (9) - notify intent to modify a buffer for meta...
kfifo_get (9)        - get data from the fifo
kfifo_out (9)        - get data from the fifo
kfifo_out_peek (9)   - gets some data from the fifo
kfifo_out_spinlocked (9) - get data from the fifo using a spinlock for locking
kfifo_peek (9)       - get data from the fifo without removing
kfifo_peek_len (9)   - gets the size of the next fifo record
kgdb_roundup_cpus (9) - Get other CPUs into a holding pattern
kmsg_dump_get_buffer (9) - copy kmsg log lines
kmsg_dump_get_line (9) - retrieve one kmsg log line
kobject_get (9)      - increment refcount for object.
kobject_get_path (9) - generate and return the path associated with a given k...
ksize (9)            - get the actual amount of memory allocated for a given ...
kstat_irqs (9)       - Get the statistics for an interrupt
kstat_irqs_cpu (9)   - Get the statistics for an interrupt on a cpu
kstat_irqs_usr (9)   - Get the statistics for an interrupt
lckpwdf (3)          - get shadow password file entry
lease_get_mtime (9)  - get the last modified time of an inode
lgetfilecon (3)      - get SELinux security context of a file
lgetfilecon_raw (3)  - get SELinux security context of a file
list_entry (9)       - get the struct for this entry
list_first_entry (9) - get the first element from a list
list_first_entry_or_null (9) - get the first element from a list
list_last_entry (9)  - get the last element from a list
list_next_entry (9)  - get the next element in list
list_prev_entry (9)  - get the prev element in list
listres (1)          - list resources in widgets
locale (1)           - get locale-specific information
Locale::gettext (3pm) - message handling functions
localeconv (3)       - get numeric formatting information
Log::Any (3pm)       - - Bringing loggers and listeners together
logb (3)             - get exponent of a floating-point value
logbf (3)            - get exponent of a floating-point value
logbl (3)            - get exponent of a floating-point value
lstat (2)            - get file status
lstat64 (2)          - get file status
make-first-existing-target (1) - runs make on one of several targets
MakeIocReady (9)     - Get IOC to a READY state, using KickStart if needed.
malloc_get_state (3) - record and restore state of malloc implementation
maple_getcond_callback (9) - setup handling MAPLE_COMMAND_GETCOND
Mason::Manual::Intro (3pm) - Getting started with Mason
Mason::Manual::RequestDispatch (3pm) - How request paths get mapped to page c...
matchmediacon (3)    - get the default SELinux security context for the speci...
matchpathcon (3)     - get the default SELinux security context for the speci...
matchpathcon_fini (3) - get the default SELinux security context for the spec...
matchpathcon_index (3) - get the default SELinux security context for the spe...
matchpathcon_init (3) - get the default SELinux security context for the spec...
modify_ldt (2)       - get or set ldt
module_usb_composite_driver (9) - Helper macro for registering a USB gadget c...
Moose::Manual::BestPractices (3pm) - Get the most out of Moose
Moose::Manual::Contributing (3pm) - How to get involved in Moose
mpt_get_cb_idx (9)   - obtain cb_idx for registered driver
mpt_get_msg_frame (9) - Obtain an MPT request frame from the pool
mpt_get_product_name (9) - returns product string
mpt_GetIocState (9)  - Get the current state of a MPT adapter.
mpt_GetScsiPortSettings (9) - read SCSI Port Page 0 and 2
mpt_raid_phys_disk_get_num_paths (9) - returns number paths associated to thi...
mptscsih_dev_reset (9) - Perform a SCSI TARGET_RESET! new_eh variant
mptscsih_get_completion_code (9) - get completion code from MPT request
mptscsih_get_scsi_lookup (9) - retrieves scmd entry
mptscsih_getclear_scsi_lookup (9) - retrieves and clears scmd entry from Scsi...
mptspi_initTarget (9) - Target, LUN alloc/free functionality.
mptspi_is_raid (9)   - Determines whether target is belonging to volume
mptspi_setTargetNegoParms (9) - Update the target negotiation parameters
mq_getattr (3)       - get/set message queue attributes
mq_getsetattr (2)    - get/set message queue attributes
mq_setattr (3)       - get/set message queue attributes
msgget (2)           - get a System V message queue identifier
nand_get_device (9)  - [GENERIC] Get chip for selected access
nand_onfi_get_features (9) - [REPLACEABLE] get features for ONFI nand
ncftpget (1)         - Internet file transfer program for scripts
Net::hostent (3perl) - by-name interface to Perl's built-in gethost*() functions
Net::netent (3perl)  - by-name interface to Perl's built-in getnet*() functions
Net::protoent (3perl) - by-name interface to Perl's built-in getproto*() func...
Net::servent (3perl) - by-name interface to Perl's built-in getserv*() functions
Net::Whois::Raw (3pm) - - Get Whois information for domains
netdev_all_lower_get_next (9) - Get the next device from all lower neighbour ...
netdev_all_lower_get_next_rcu (9) - Get the next device from all lower neighb...
netdev_all_upper_get_next_dev_rcu (9) - Get the next dev from upper list
netdev_lower_get_first_private_rcu (9) - Get the first - >private from the lo...
netdev_lower_get_next (9) - Get the next device from the lower neighbour list
netdev_lower_get_next_private (9) - Get the next - >private from the lower ne...
netdev_lower_get_next_private_rcu (9) - Get the next - >private from the lowe...
netdev_master_upper_dev_get (9) - Get master upper device
netdev_master_upper_dev_get_rcu (9) - Get master upper device
netdev_upper_get_next_dev_rcu (9) - Get the next dev from upper list
netif_get_num_default_rss_queues (9) - default number of RSS queues
ngettext (1)         - translate message and choose plural form
ngettext (3)         - translate message and choose plural form
of_pwm_get (9)       - request a PWM via the PWM framework
oldfstat (2)         - get file status
oldlstat (2)         - get file status
oldolduname (2)      - get name and information about current kernel
oldstat (2)          - get file status
olduname (2)         - get name and information about current kernel
OPENSSL_VERSION_NUMBER (3ssl) - get OpenSSL version number
pagecache_get_page (9) - find and get a page reference
pam_get_authtok (3)  - get authentication token
pam_get_authtok_noverify (3) - get authentication token
pam_get_authtok_verify (3) - get authentication token
pam_get_data (3)     - get module internal data
pam_get_item (3)     - getting PAM informations
pam_get_user (3)     - get user name
pam_getenv (3)       - get a PAM environment variable
pam_getenv (8)       - get environment variables from /etc/environment
pam_getenvlist (3)   - getting the PAM environment
panic_nand_get_device (9) - [GENERIC] Get chip for selected access
params_buffer_bytes (9) - Get the buffer size (in bytes) from the hw params
params_buffer_size (9) - Get the buffer size (in frames) from the hw params
params_channels (9)  - Get the number of channels from the hw params
params_period_size (9) - Get the period size (in frames) from the hw params
params_periods (9)   - Get the number of periods from the hw params
params_rate (9)      - Get the sample rate from the hw params
parport_get_port (9) - increment a port's reference count
path_get (9)         - get a reference to a path
pathconf (3)         - get configuration values for files
pci_dev_driver (9)   - get the pci_driver of a device
pci_dev_get (9)      - increments the reference count of the pci device struc...
pci_get_class (9)    - begin or continue searching for a PCI device by class
pci_get_device (9)   - begin or continue searching for a PCI device by vendor...
pci_get_domain_bus_and_slot (9) - locate PCI device for a given PCI domain (s...
pci_get_slot (9)     - locate PCI device for a given PCI slot
pci_get_subsys (9)   - begin or continue searching for a PCI device by vendor...
pci_sriov_get_totalvfs (9) - - get total VFs supported on this device
pcie_get_minimum_link (9) - determine minimum link settings of a PCI device
pcie_get_mps (9)     - get PCI Express maximum payload size
pcie_get_readrq (9)  - get PCI Express read request size
pcix_get_max_mmrbc (9) - get PCI-X maximum designed memory read byte count
pcix_get_mmrbc (9)   - get PCI-X maximum memory read byte count
pcre16_get_named_substring (3) - Perl-compatible regular expressions
pcre16_get_stringnumber (3) - Perl-compatible regular expressions
pcre16_get_stringtable_entries (3) - Perl-compatible regular expressions
pcre16_get_substring (3) - Perl-compatible regular expressions
pcre16_get_substring_list (3) - Perl-compatible regular expressions
pcre32_get_named_substring (3) - Perl-compatible regular expressions
pcre32_get_stringnumber (3) - Perl-compatible regular expressions
pcre32_get_stringtable_entries (3) - Perl-compatible regular expressions
pcre32_get_substring (3) - Perl-compatible regular expressions
pcre32_get_substring_list (3) - Perl-compatible regular expressions
pcre_get_named_substring (3) - Perl-compatible regular expressions
pcre_get_stringnumber (3) - Perl-compatible regular expressions
pcre_get_stringtable_entries (3) - Perl-compatible regular expressions
pcre_get_substring (3) - Perl-compatible regular expressions
pcre_get_substring_list (3) - Perl-compatible regular expressions
php-config (1)       - get information about PHP configuration and compile op...
php-config5 (1)      - get information about PHP configuration and compile op...
phy_ethtool_get_eee (9) - get EEE supported and status
phy_get_eee_err (9)  - report the EEE wake error count
platform_get_irq (9) - get an IRQ for a device
platform_get_irq_byname (9) - get an IRQ for a device by name
platform_get_resource (9) - get a resource for a device
platform_get_resource_byname (9) - get a resource for a device by name
pmap_getmaps (3)     - library routines for remote procedure calls
pmap_getport (3)     - library routines for remote procedure calls
Pod::Perldoc::GetOptsOO (3perl) - Customized option parser for Pod::Perldoc
Pod::Simple::TextContent (3perl) - - get the text content of Pod
prlimit (1)          - get and set process resource limits
prlimit (2)          - get/set resource limits
psfgettable (1)      - extract the embedded Unicode character table from a co...
pthread_attr_getaffinity_np (3) - set/get CPU affinity attribute in thread at...
pthread_attr_getdetachstate (3) - set/get detach state attribute in thread at...
pthread_attr_getguardsize (3) - set/get guard size attribute in thread attrib...
pthread_attr_getinheritsched (3) - set/get inherit-scheduler attribute in thr...
pthread_attr_getschedparam (3) - set/get scheduling parameter attributes in t...
pthread_attr_getschedpolicy (3) - set/get scheduling policy attribute in thre...
pthread_attr_getscope (3) - set/get contention scope attribute in thread attr...
pthread_attr_getstack (3) - set/get stack attributes in thread attributes object
pthread_attr_getstackaddr (3) - set/get stack address attribute in thread att...
pthread_attr_getstacksize (3) - set/get stack size attribute in thread attrib...
pthread_attr_setaffinity_np (3) - set/get CPU affinity attribute in thread at...
pthread_attr_setdetachstate (3) - set/get detach state attribute in thread at...
pthread_attr_setguardsize (3) - set/get guard size attribute in thread attrib...
pthread_attr_setinheritsched (3) - set/get inherit-scheduler attribute in thr...
pthread_attr_setschedparam (3) - set/get scheduling parameter attributes in t...
pthread_attr_setschedpolicy (3) - set/get scheduling policy attribute in thre...
pthread_attr_setscope (3) - set/get contention scope attribute in thread attr...
pthread_attr_setstack (3) - set/get stack attributes in thread attributes object
pthread_attr_setstackaddr (3) - set/get stack address attribute in thread att...
pthread_attr_setstacksize (3) - set/get stack size attribute in thread attrib...
pthread_getaffinity_np (3) - set/get CPU affinity of a thread
pthread_getattr_np (3) - get attributes of created thread
pthread_getconcurrency (3) - set/get the concurrency level
pthread_getcpuclockid (3) - retrieve ID of a thread's CPU time clock
pthread_getname_np (3) - set/get the name of a thread
pthread_getschedparam (3) - set/get scheduling policy and parameters of a thread
pthread_setaffinity_np (3) - set/get CPU affinity of a thread
pthread_setconcurrency (3) - set/get the concurrency level
pthread_setname_np (3) - set/get the name of a thread
pthread_setschedparam (3) - set/get scheduling policy and parameters of a thread
ptsname (3)          - get the name of the slave pseudoterminal
ptsname_r (3)        - get the name of the slave pseudoterminal
putspent (3)         - get shadow password file entry
pwm_get (9)          - look up and request a PWM device
pwm_get_chip_data (9) - get private chip data for a PWM
pwm_get_relative_duty_cycle (9) - Get a relative duty cycle value
pwm_get_state (9)    - retrieve the current PWM state
pygettext (1)        - Python equivalent of xgettext(1)
pygettext2.7 (1)     - Python equivalent of xgettext(1)
pygettext3 (1)       - Python equivalent of xgettext(1)
pygettext3.4 (1)     - Python equivalent of xgettext(1)
RAND_get_rand_method (3ssl) - select RAND method
rdev_get_drvdata (9) - get rdev regulator driver data
rdev_get_id (9)      - get regulator ID
readline (3readline) - get a line from a user with editing
regulator_bulk_get (9) - get multiple regulator consumers
regulator_get (9)    - lookup and obtain a reference to a regulator.
regulator_get_current_limit (9) - get regulator output current
regulator_get_drvdata (9) - get regulator driver data
regulator_get_exclusive (9) - obtain exclusive access to a regulator.
regulator_get_hardware_vsel_register (9) - get the HW voltage selector register
regulator_get_linear_step (9) - return the voltage step size between VSEL values
regulator_get_mode (9) - get regulator operating mode
regulator_get_optional (9) - obtain optional access to a regulator.
regulator_get_voltage (9) - get regulator output voltage
regulator_list_hardware_vsel (9) - get the HW-specific register value for a s...
regulator_set_voltage_time (9) - get raise/fall time
regulator_set_voltage_time_sel (9) - get raise/fall time
reservation_object_get_excl (9) - get the reservation object's exclusive fenc...
reservation_object_get_excl_rcu (9) - get the reservation object's exclusive ...
reservation_object_get_fences_rcu (9) - Get an object's shared and exclusive ...
reservation_object_get_list (9) - get the reservation object's shared fence l...
rio_dev_get (9)      - Increments the reference count of the RIO device struc...
rio_get_asm (9)      - Begin or continue searching for a RIO device by vid/di...
rio_get_comptag (9)  - Begin or continue searching for a RIO device by compon...
rio_get_device (9)   - Begin or continue searching for a RIO device by vid/did
rio_get_device_id (9) - Get the base/extended device id for a device
rio_get_drvdata (9)  - Get RIO driver specific data
rio_get_host_deviceid_lock (9) - Reads the Host Device ID Lock CSR on a device
rio_get_inb_message (9) - Get A RIO message from an inbound mailbox queue
rio_get_input_status (9) - Sends a Link-Request/Input-Status control symbol a...
rio_local_get_device_id (9) - Get the base/extended device id for a port
rio_mport_get_efb (9) - get pointer to next extended features block
rio_mport_get_feature (9) - query for devices' extended features
rio_mport_get_physefb (9) - Helper function that returns register offset for ...
rio_name (9)         - Get the unique RIO device identifier
rio_request_dma (9)  - request RapidIO capable DMA channel that supports spec...
rio_route_get_entry (9) - Read an entry from a switch routing table
rio_std_route_get_entry (9) - Read switch route table entry (port number) ass...
rpc_get_timeout (9)  - Get timeout for transport in units of HZ
rpc_max_bc_payload (9) - Get maximum backchannel payload size, in bytes
rpc_max_payload (9)  - Get maximum payload size for a transport, in bytes
rpc_net_ns (9)       - Get the network namespace for this RPC client
rpc_protocol (9)     - Get transport protocol number for an RPC client
rpcb_getport_async (9) - obtain the port for a given RPC service on a given host
rpm_execcon (3)      - get or set the SELinux security context used for execu...
RSA_get_default_method (3ssl) - select RSA method
RSA_get_ex_data (3ssl) - add application specific data to RSA structures
RSA_get_ex_new_index (3ssl) - add application specific data to RSA structures
RSA_get_method (3ssl) - select RSA method
RSA_size (3ssl)      - get RSA modulus size
rtime (3)            - get time from a remote machine
sas_get_address (9)  - return the SAS address of the device
sas_port_get_phy (9) - try to take a reference on a port member
sb_start_pagefault (9) - get write access to a superblock from a page fault
sb_start_write (9)   - get write access to a superblock
sched_get_priority_max (2) - get static priority range
sched_get_priority_min (2) - get static priority range
sched_getaffinity (2) - set and get a thread's CPU affinity mask
sched_getattr (2)    - set and get scheduling policy and attributes
sched_getcpu (3)     - determine CPU on which the calling thread is running
sched_getparam (2)   - set and get scheduling parameters
sched_getscheduler (2) - set and get scheduling policy/parameters
sched_rr_get_interval (2) - get the SCHED_RR interval for the named process
sched_setaffinity (2) - set and get a thread's CPU affinity mask
sched_setattr (2)    - set and get scheduling policy and attributes
sched_setparam (2)   - set and get scheduling parameters
sched_setscheduler (2) - set and get scheduling policy/parameters
scsi_10_lba_len (9)  - Get LBA and transfer length
scsi_16_lba_len (9)  - Get LBA and transfer length
scsi_6_lba_len (9)   - Get LBA and transfer length
scsi_alloc_target (9) - allocate a new or find an existing target
scsi_cmd_get_serial (9) - Assign a serial number to a command
scsi_device_get (9)  - get an additional reference to a scsi_device
scsi_device_lookup_by_target (9) - find a device given the target
scsi_eh_get_sense (9) - Get device sense data.
scsi_get_device_flags (9) - get device specific flags from the dynamic device...
scsi_get_sense_info_fld (9) - get information field from sense data (either f...
scsi_get_vpd_page (9) - Get Vital Product Data from a SCSI device
scsi_host_get (9)    - inc a Scsi_Host ref count
scsi_host_lookup (9) - get a reference to a Scsi_Host by host no
scsi_remove_target (9) - try to remove a target and all its devices
scsi_sequential_lun_scan (9) - sequentially scan a SCSI target
scsi_target_reap (9) - check to see if target is in use and destroy if not
scsi_target_reap_ref_release (9) - remove target from visibility
secure_getenv (3)    - get an environment variable
security_deny_unknown (3) - get or set the enforcing state of SELinux
security_get_boolean_active (3) - routines for manipulating SELinux boolean v...
security_get_boolean_names (3) - routines for manipulating SELinux boolean va...
security_get_boolean_pending (3) - routines for manipulating SELinux boolean ...
security_get_initial_context (3) - query the SELinux policy database in the k...
security_get_initial_context_raw (3) - query the SELinux policy database in t...
security_getenforce (3) - get or set the enforcing state of SELinux
security_policyvers (3) - get the version of the SELinux policy
security_setenforce (3) - get or set the enforcing state of SELinux
selinux_getenforcemode (3) - get the enforcing state of SELinux
selinux_getpolicytype (3) - get the type of SELinux policy running on the system
selinux_status_getenforce (3) - reference the SELinux kernel status without i...
sem_getvalue (3)     - get the value of a semaphore
semget (2)           - get a System V semaphore set identifier
serial8250_get_port (9) - retrieve struct uart_8250_port
set_restore_sigmask (9) - make sure saved_sigmask processing gets done
set_robust_list (2)  - get/set list of robust futexes
setcon (3)           - get SELinux security context of a process
setcon_raw (3)       - get SELinux security context of a process
setcontext (2)       - get or set the user context
setcontext (3)       - get or set the user context
setdomainname (2)    - get/set NIS domain name
setexeccon (3)       - get or set the SELinux security context used for execu...
setexeccon_raw (3)   - get or set the SELinux security context used for execu...
setfscreatecon (3)   - get or set the SELinux security context used for creat...
setfscreatecon_raw (3) - get or set the SELinux security context used for cre...
setgrent (3)         - get group file entry
setgroups (2)        - get/set list of supplementary group IDs
setgroups32 (2)      - get/set list of supplementary group IDs
sethostent (3)       - get network host entry
sethostid (2)        - get or set the unique identifier of the current host
sethostid (3)        - get or set the unique identifier of the current host
sethostname (2)      - get/set hostname
setitimer (2)        - get or set value of an interval timer
setkeycreatecon (3)  - get or set the SELinux security context used for creat...
setkeycreatecon_raw (3) - get or set the SELinux security context used for cr...
setmntent (3)        - get filesystem descriptor file entry
setnetent (3)        - get network entry
setpgid (2)          - set/get process group
setpgrp (2)          - set/get process group
setpriority (2)      - get/set program scheduling priority
setprotoent (3)      - get protocol entry
setpwent (3)         - get password file entry
setrlimit (2)        - get/set resource limits
setrpcent (3)        - get RPC entry
setservent (3)       - get service entry
setsockcreatecon (3) - get or set the SELinux security context used for creat...
setsockcreatecon_raw (3) - get or set the SELinux security context used for c...
setsockopt (2)       - get and set options on sockets
setspent (3)         - get shadow password file entry
settimeofday (2)     - get / set time
setttyent (3)        - get ttys file entry
setusershell (3)     - get permitted user shells
sget (9)             - find or create a superblock
sget_userns (9)      - find or create a superblock
sgetmask (2)         - manipulation of signal mask (obsolete)
sgetspent (3)        - get shadow password file entry
sgetspent_r (3)      - get shadow password file entry
sh64_get_wired_dtlb_entry (9) - Allocate a wired (locked-in) entry in the DTLB
shmget (2)           - allocates a System V shared memory segment
sidget (3)           - obtain and manipulate SELinux security ID's
sigaltstack (2)      - set and/or get signal stack context
siggetmask (3)       - BSD signal API
significand (3)      - get mantissa of floating-point number
significandf (3)     - get mantissa of floating-point number
significandl (3)     - get mantissa of floating-point number
sigstack (3)         - set and/or get signal stack context
sk_rmem_alloc_get (9) - returns read allocations
sk_stream_wait_connect (9) - Wait for a socket to get into the connected state
sk_wmem_alloc_get (9) - returns write allocations
skb_frag_address (9) - gets the address of the data contained in a paged frag...
skb_frag_address_safe (9) - gets the address of the data contained in a paged...
skb_get (9)          - reference buffer
skb_get_timestamp (9) - get timestamp from a skb
skb_mstamp_get (9)   - get current timestamp
skb_queue_len (9)    - get queue length
smbcacls (1)         - Set or get ACLs on an NT file or directory names
smbcquotas (1)       - Set or get QUOTAs of NTFS 5 shares
smbget (1)           - wget-like utility for download files over SMB
smbgetrc (5)         - configuration file for smbget
snd_ac97_get_short_name (9) - retrieve codec name
snd_info_get_line (9) - read one line from the procfs buffer
snd_info_get_str (9) - parse a string token
snd_lookup_minor_data (9) - get user data of a registered device
snd_pcm_capture_avail (9) - Get the available (readable) space for capture
snd_pcm_capture_hw_avail (9) - Get the free space for capture
snd_pcm_chmap_substream (9) - get the PCM substream assigned to the given chm...
snd_pcm_gettime (9)  - Fill the timespec depending on the timestamp mode
snd_pcm_lib_buffer_bytes (9) - Get the buffer size of the current PCM in bytes
snd_pcm_lib_get_vmalloc_page (9) - map vmalloc buffer offset to page struct
snd_pcm_lib_period_bytes (9) - Get the period size of the current PCM in bytes
snd_pcm_limit_isa_dma_size (9) - Get the max size fitting with ISA DMA transfer
snd_pcm_playback_avail (9) - Get the available (writable) space for playback
snd_pcm_playback_hw_avail (9) - Get the queued space for playback
snd_pcm_sgbuf_get_addr (9) - Get the DMA address at the corresponding offset
snd_pcm_sgbuf_get_chunk_size (9) - Compute the max size that fits within the ...
snd_pcm_sgbuf_get_ptr (9) - Get the virtual address at the corresponding offset
snd_pcm_sgbuf_ops_page (9) - get the page struct at the given offset
snd_pcm_stream_str (9) - Get a string naming the direction of a stream
snd_pcm_substream_to_dma_direction (9) - Get dma_transfer_direction for a PCM...
snd_soc_codec_get_bias_level (9) - Get current CODEC DAPM bias level
snd_soc_codec_get_dapm (9) - Returns the DAPM context for the CODEC
snd_soc_component_get_dapm (9) - Returns the DAPM context associated with a c...
snd_soc_dapm_add_routes (9) - Add routes between DAPM widgets
snd_soc_dapm_del_routes (9) - Remove routes between DAPM widgets
snd_soc_dapm_get_enum_double (9) - dapm enumerated double mixer get callback
snd_soc_dapm_get_pin_status (9) - get audio pin status
snd_soc_dapm_get_pin_switch (9) - Get information for a pin switch
snd_soc_dapm_get_volsw (9) - dapm mixer get callback
snd_soc_dapm_kcontrol_widget (9) - Returns the widget associated to a kcontrol
snd_soc_dapm_new_widgets (9) - add new dapm widgets
snd_soc_dapm_weak_routes (9) - Mark routes between DAPM widgets as weak
snd_soc_get_enum_double (9) - enumerated double mixer get callback
snd_soc_get_strobe (9) - strobe get callback
snd_soc_get_volsw (9) - single mixer get callback
snd_soc_get_volsw_range (9) - single mixer get callback with range
snd_soc_get_volsw_sx (9) - single mixer get callback
snd_soc_get_xr_sx (9) - signed multi register get callback
snd_soc_jack_get_type (9) - Based on the mic bias value, this function return...
snd_soc_put_xr_sx (9) - signed multi register get callback
snd_soc_register_dai (9) - Register a DAI dynamically & create its widgets
spi_display_xfer_agreement (9) - Print the current target transfer agreement
spi_get_next_queued_message (9) - called by driver to check for queued messages
SPI_getargcount (3)  - return the number of arguments needed by a statement p...
SPI_getargtypeid (3) - return the data type OID for an argument of a statemen...
SPI_getbinval (3)    - return the binary value of the specified column
SPI_getnspname (3)   - return the namespace of the specified relation
SPI_getrelname (3)   - return the name of the specified relation
SPI_gettype (3)      - return the data type name of the specified column
SPI_gettypeid (3)    - return the data type OID of the specified column
SPI_getvalue (3)     - return the string value of the specified column
srp_reconnect_rport (9) - reconnect to an SRP target port
srp_rport_get (9)    - increment rport reference count
SSL_alert_desc_string (3ssl) - get textual description of alert information
SSL_alert_desc_string_long (3ssl) - get textual description of alert information
SSL_alert_type_string (3ssl) - get textual description of alert information
SSL_alert_type_string_long (3ssl) - get textual description of alert information
SSL_CIPHER_description (3ssl) - get SSL_CIPHER properties
SSL_CIPHER_get_bits (3ssl) - get SSL_CIPHER properties
SSL_CIPHER_get_name (3ssl) - get SSL_CIPHER properties
SSL_CIPHER_get_version (3ssl) - get SSL_CIPHER properties
SSL_CTX_get_cert_store (3ssl) - manipulate X509 certificate verification storage
SSL_CTX_get_client_CA_list (3ssl) - get list of client CAs
SSL_CTX_get_client_cert_cb (3ssl) - handle client certificate callback function
SSL_CTX_get_default_read_ahead (3ssl) - manage whether to read as many input ...
SSL_CTX_get_ex_data (3ssl) - internal application specific data functions
SSL_CTX_get_ex_new_index (3ssl) - internal application specific data functions
SSL_CTX_get_info_callback (3ssl) - handle information callback for SSL connec...
SSL_CTX_get_max_cert_list (3ssl) - manipulate allowed for the peer's certific...
SSL_CTX_get_mode (3ssl) - manipulate SSL engine mode
SSL_CTX_get_options (3ssl) - manipulate SSL options
SSL_CTX_get_quiet_shutdown (3ssl) - manipulate shutdown behaviour
SSL_CTX_get_read_ahead (3ssl) - manage whether to read as many input bytes as...
SSL_CTX_get_session_cache_mode (3ssl) - enable/disable session caching
SSL_CTX_get_timeout (3ssl) - manipulate timeout values for session caching
SSL_CTX_get_verify_callback (3ssl) - get currently set verification parameters
SSL_CTX_get_verify_depth (3ssl) - get currently set verification parameters
SSL_CTX_get_verify_mode (3ssl) - get currently set verification parameters
SSL_CTX_sess_get_cache_size (3ssl) - manipulate session cache size
SSL_CTX_sess_get_get_cb (3ssl) - provide callback functions for server side e...
SSL_CTX_sess_get_new_cb (3ssl) - provide callback functions for server side e...
SSL_CTX_sess_get_remove_cb (3ssl) - provide callback functions for server sid...
SSL_CTX_sess_set_get_cb (3ssl) - provide callback functions for server side e...
SSL_get_accept_state (3ssl) - prepare SSL object to work in client or server ...
SSL_get_cipher (3ssl) - get SSL_CIPHER of a connection
SSL_get_cipher_bits (3ssl) - get SSL_CIPHER of a connection
SSL_get_cipher_list (3ssl) - get list of available SSL_CIPHERs
SSL_get_cipher_name (3ssl) - get SSL_CIPHER of a connection
SSL_get_cipher_version (3ssl) - get SSL_CIPHER of a connection
SSL_get_ciphers (3ssl) - get list of available SSL_CIPHERs
SSL_get_client_CA_list (3ssl) - get list of client CAs
SSL_get_current_cipher (3ssl) - get SSL_CIPHER of a connection
SSL_get_default_timeout (3ssl) - get default session timeout value
SSL_get_error (3ssl) - obtain result code for TLS/SSL I/O operation
SSL_get_ex_data (3ssl) - internal application specific data functions
SSL_get_ex_data_X509_STORE_CTX_idx (3ssl) - get ex_data index to access SSL s...
SSL_get_ex_new_index (3ssl) - internal application specific data functions
SSL_get_fd (3ssl)    - get file descriptor linked to an SSL object
SSL_get_info_callback (3ssl) - handle information callback for SSL connections
SSL_get_max_cert_list (3ssl) - manipulate allowed for the peer's certificate ...
SSL_get_mode (3ssl)  - manipulate SSL engine mode
SSL_get_msg_callback_arg (3ssl) - install callback for observing protocol mes...
SSL_get_options (3ssl) - manipulate SSL options
SSL_get_peer_cert_chain (3ssl) - get the X509 certificate chain of the peer
SSL_get_peer_certificate (3ssl) - get the X509 certificate of the peer
SSL_get_psk_identity (3ssl) - get PSK client identity and hint
SSL_get_psk_identity_hint (3ssl) - get PSK client identity and hint
SSL_get_quiet_shutdown (3ssl) - manipulate shutdown behaviour
SSL_get_rbio (3ssl)  - get BIO linked to an SSL object
SSL_get_read_ahead (3ssl) - manage whether to read as many input bytes as pos...
SSL_get_secure_renegotiation_support (3ssl) - manipulate SSL options
SSL_get_session (3ssl) - retrieve TLS/SSL session data
SSL_get_shutdown (3ssl) - manipulate shutdown state of an SSL connection
SSL_get_SSL_CTX (3ssl) - get the SSL_CTX from which an SSL is created
SSL_get_ssl_method (3ssl) - choose a new TLS/SSL method
SSL_get_tlsext_status_ocsp_resp (3ssl) - OCSP Certificate Status Request func...
SSL_get_verify_callback (3ssl) - get currently set verification parameters
SSL_get_verify_depth (3ssl) - get currently set verification parameters
SSL_get_verify_mode (3ssl) - get currently set verification parameters
SSL_get_verify_result (3ssl) - get result of peer certificate verification
SSL_get_version (3ssl) - get the protocol version of a connection.
SSL_rstate_string (3ssl) - get textual description of state of an SSL object ...
SSL_rstate_string_long (3ssl) - get textual description of state of an SSL ob...
SSL_SESSION_get_ex_data (3ssl) - internal application specific data functions
SSL_SESSION_get_ex_new_index (3ssl) - internal application specific data func...
SSL_SESSION_get_time (3ssl) - retrieve and manipulate session time and timeou...
SSL_SESSION_get_timeout (3ssl) - retrieve and manipulate session time and tim...
SSL_state_string (3ssl) - get textual description of state of an SSL object
SSL_state_string_long (3ssl) - get textual description of state of an SSL object
SSLeay (3ssl)        - get OpenSSL version number
SSLeay_version (3ssl) - get OpenSSL version number
starget_for_each_device (9) - helper to walk all devices of a target
stat (2)             - get file status
stat64 (2)           - get file status
statfs (2)           - get filesystem statistics
statfs64 (2)         - get filesystem statistics
statvfs (2)          - get filesystem statistics
statvfs (3)          - get filesystem statistics
strcspn (3)          - get length of a prefix substring
strspn (3)           - get length of a prefix substring
struct_spi_replaced_transfers (9) - structure describing the spi_transfer rep...
struct_usb_composite_dev (9) - represents one composite usb gadget
struct_usb_composite_driver (9) - groups configurations into a gadget
struct_usb_configuration (9) - represents one gadget configuration
struct_usb_gadget (9) - represents a usb slave device
struct_usb_gadget_driver (9) - driver for usb 'slave' devices
struct_usb_gadget_strings (9) - a set of USB strings in a given language
svc_getargs (3)      - library routines for remote procedure calls
svc_getcaller (3)    - library routines for remote procedure calls
svc_getreq (3)       - library routines for remote procedure calls
svc_getreqset (3)    - library routines for remote procedure calls
Sys::Hostname (3perl) - Try every conceivable way to get hostname
Sys::Hostname::Long (3pm) - Try every conceivable way to get full hostname
sys_get_robust_list (9) - Get the robust-futex list head of a task
sysconf (3)          - get configuration information at run time
sysfs (2)            - get filesystem type information
systemd-getty-generator (8) - Generator for enabling getty instances on the c...
systemd.target (5)   - Target unit configuration
tcdrain (3)          - get and set terminal attributes, line control, get and...
tcflow (3)           - get and set terminal attributes, line control, get and...
tcflush (3)          - get and set terminal attributes, line control, get and...
tcgetattr (3)        - get and set terminal attributes, line control, get and...
tcgetpgrp (3)        - get and set terminal foreground process group
tcgetsid (3)         - get session ID
tcsendbreak (3)      - get and set terminal attributes, line control, get and...
tcsetattr (3)        - get and set terminal attributes, line control, get and...
tcsetpgrp (3)        - get and set terminal foreground process group
termios (3)          - get and set terminal attributes, line control, get and...
Text::CharWidth (3pm) - Get number of occupied columns of a string on terminal
textdomain (3)       - set domain for future gettext() calls
time (2)             - get time in seconds
Time::HiRes (3perl)  - High resolution alarm, sleep, gettimeofday, interval t...
timer_getoverrun (2) - get overrun count for a POSIX per-process timer
timer_gettime (2)    - arm/disarm and fetch state of POSIX per-process timer
timerfd_gettime (2)  - timers that notify via file descriptors
times (2)            - get process times
tinydns-get (1)      - is like dnsq(1), but obtains its results from data.cdb...
trace_block_getrq (9) - get a free request entry in queue for block IO operat...
trace_block_sleeprq (9) - waiting to get a free request entry in queue for bl...
trace_workqueue_activate_work (9) - called when a work gets activated
trace_workqueue_queue_work (9) - called when a work gets queued
tsget (1ssl)         - Time Stamping HTTP/HTTPS client
Type::Coercion (3pm) - a set of coercions to a particular target type constraint
uart_get_baud_rate (9) - return baud rate for a particular port
uart_get_divisor (9) - return uart clock divisor
ugetrlimit (2)       - get/set resource limits
UI_get0_result (3ssl) - New User Interface
UI_get0_user_data (3ssl) - New User Interface
UI_get_default_method (3ssl) - New User Interface
UI_get_method (3ssl) - New User Interface
ulckpwdf (3)         - get shadow password file entry
ulimit (3)           - get and set user limits
uname (2)            - get name and information about current kernel
ungetc (3)           - input of characters and strings
ungetwc (3)          - push back a wide character onto a FILE stream
usb_altnum_to_altsetting (9) - get the altsetting structure with a given alte...
usb_autopm_get_interface (9) - increment a USB interface's PM-usage counter
usb_autopm_get_interface_async (9) - increment a USB interface's PM-usage cou...
usb_autopm_get_interface_no_resume (9) - increment a USB interface's PM-usage...
usb_ep_align_maybe (9) - returns len aligned to ep's maxpacketsize if gadget ...
usb_function_activate (9) - allow function and gadget enumeration
usb_function_deactivate (9) - prevent function and gadget enumeration
usb_gadget_config_buf (9) - builts a complete configuration descriptor
usb_gadget_get_string (9) - fill out a string descriptor
usb_gadget_probe_driver (9) - probe a gadget driver
usb_gadget_unregister_driver (9) - unregister a gadget driver
usb_get_current_frame_number (9) - return current bus frame number
usb_get_descriptor (9) - issues a generic GET_DESCRIPTOR request
usb_get_dev (9)      - increments the reference count of the usb device struc...
usb_get_from_anchor (9) - get an anchor's oldest urb
usb_get_intf (9)     - increments the reference count of the usb interface st...
usb_get_maximum_speed (9) - Get maximum requested speed for a given USB contr...
usb_get_status (9)   - issues a GET_STATUS call
usb_get_urb (9)      - increments the reference count of the urb
usb_gstrings_attach (9) - attach gadget strings to a cdev and assign ids
usb_hub_find_child (9) - Get the pointer of child device attached to the port...
usb_ifnum_to_if (9)  - get the interface object with a given interface number
uselocale (3)        - set/get the locale for the calling thread
User::grent (3perl)  - by-name interface to Perl's built-in getgr*() functions
User::pwent (3perl)  - by-name interface to Perl's built-in getpw*() functions
ustat (2)            - get filesystem statistics
vlimit (3)           - get/set resource limits
vtimes (3)           - get resource usage
wait_event (9)       - sleep until a condition gets true
wait_event_cmd (9)   - sleep until a condition gets true
wait_event_freezable (9) - sleep (or freeze) until a condition gets true
wait_event_hrtimeout (9) - sleep until a condition gets true or a timeout ela...
wait_event_interruptible (9) - sleep until a condition gets true
wait_event_interruptible_exclusive_lo... (9) - sleep exclusively until a cond...
wait_event_interruptible_exclusive_lo... (9) - sleep until a condition gets true
wait_event_interruptible_hrtimeout (9) - sleep until a condition gets true or...
wait_event_interruptible_lock_irq (9) - sleep until a condition gets true. Th...
wait_event_interruptible_lock_irq_cmd (9) - sleep until a condition gets true...
wait_event_interruptible_lock_irq_tim... (9) - sleep until a condition gets t...
wait_event_interruptible_locked (9) - sleep until a condition gets true
wait_event_interruptible_locked_irq (9) - sleep until a condition gets true
wait_event_interruptible_timeout (9) - sleep until a condition gets true or a...
wait_event_killable (9) - sleep until a condition gets true
wait_event_lock_irq (9) - sleep until a condition gets true. The condition is...
wait_event_lock_irq_cmd (9) - sleep until a condition gets true. The conditio...
wait_event_timeout (9) - sleep until a condition gets true or a timeout elapses
wimax_state_get (9)  - Return the current state of a WiMAX device
wiphy_dev (9)        - get wiphy dev pointer
wiphy_name (9)       - get wiphy name
X509_NAME_ENTRY_get_data (3ssl) - X509_NAME_ENTRY utility functions
X509_NAME_ENTRY_get_object (3ssl) - X509_NAME_ENTRY utility functions
X509_NAME_get_entry (3ssl) - X509_NAME lookup and enumeration functions
X509_NAME_get_index_by_NID (3ssl) - X509_NAME lookup and enumeration functions
X509_NAME_get_index_by_OBJ (3ssl) - X509_NAME lookup and enumeration functions
X509_NAME_get_text_by_NID (3ssl) - X509_NAME lookup and enumeration functions
X509_NAME_get_text_by_OBJ (3ssl) - X509_NAME lookup and enumeration functions
X509_STORE_CTX_get0_param (3ssl) - X509_STORE_CTX initialisation
X509_STORE_CTX_get1_chain (3ssl) - get or set certificate verification status...
X509_STORE_CTX_get_current_cert (3ssl) - get or set certificate verification ...
X509_STORE_CTX_get_error (3ssl) - get or set certificate verification status ...
X509_STORE_CTX_get_error_depth (3ssl) - get or set certificate verification s...
X509_STORE_CTX_get_ex_data (3ssl) - add application specific data to X509_STO...
X509_STORE_CTX_get_ex_new_index (3ssl) - add application specific data to X50...
X509_STORE_CTX_set_error (3ssl) - get or set certificate verification status ...
X509_verify_cert_error_string (3ssl) - get or set certificate verification st...
X509_VERIFY_PARAM_get_depth (3ssl) - X509 verification parameters
X509_VERIFY_PARAM_get_flags (3ssl) - X509 verification parameters
xdg-settings (1)     - get various settings from the desktop environment
xdr_getpos (3)       - library routines for external data representation
xgettext (1)         - extract gettext strings from source
xml2-config (1)      - script to get information about the installed version ...
xprt_get (9)         - return a reference to an RPC transport.
zshcompwid (1)       - zsh completion widgets