:: RootR ::  Hosting Order Map Login   Secure Inter-Network Operations  
 
IV(0x1577f88) - phpMan

Command: man perldoc info search(apropos)  


hosts.equiv (5)      - list of hosts and users that are granted "trusted" r c...
GnuPG (3pm)          - Perl module interface to the GNU Privacy Guard (v1.x.x...
Mail (1)             - send and receive mail
URI (3pm)            - Uniform Resource Identifiers (absolute and relative)
__atomic_add_unless (9) - add unless the number is already a given value
__audit_mq_sendrecv (9) - record audit data for a POSIX MQ timed send/receive
__blk_end_request (9) - Helper function for drivers to complete the request.
__blk_end_request_all (9) - Helper function for drives to finish the request.
__dev_get_by_flags (9) - find any device with given flags
__inode_permission (9) - Check for access rights to a given inode
__kfree_skb (9)      - private function
__mdiobus_register (9) - bring up all the PHYs on a given bus and attach them...
__napi_schedule (9)  - schedule for receive
__napi_schedule_irqoff (9) - schedule for receive
__parport_register_driver (9) - register a parallel port device driver
__pci_register_driver (9) - register a new pci driver
__platform_create_bundle (9) - register driver and create corresponding device
__platform_driver_probe (9) - register driver for non-hotpluggable device
__platform_driver_register (9) - register a driver for platform-level devices
__platform_register_drivers (9) - register an array of platform drivers
__pskb_copy_fclone (9) - create copy of an sk_buff with private head.
__round_jiffies_relative (9) - function to round jiffies to a full second
__round_jiffies_up_relative (9) - function to round jiffies up to a full second
__scsi_device_lookup (9) - find a device given the host (UNLOCKED)
__scsi_device_lookup_by_target (9) - find a device given the target (UNLOCKED)
__skb_try_recv_datagram (9) - Receive a datagram skbuff
__spi_register_driver (9) - register a SPI driver
__splice_from_pipe (9) - splice data from a pipe to given actor
abort_exclusive_wait (9) - abort exclusive waiting in a queue
acpi_bus_scan (9)    - Add ACPI device node objects in a given namespace scope.
acpi_bus_trim (9)    - Detach scan handlers and drivers from ACPI device obje...
agetty (8)           - alternative Linux getty
airq_iv_alloc (9)    - allocate irq bits from an interrupt vector
airq_iv_create (9)   - create an interrupt vector
airq_iv_free (9)     - free irq bits of an interrupt vector
airq_iv_release (9)  - release an interrupt vector
airq_iv_scan (9)     - scan interrupt vector for non-zero bits
alarm (2)            - set an alarm clock for delivery of a signal
alloc_contig_range (9) - - tries to allocate given range of pages
allocate_resource (9) - allocate empty slot in the resource tree given range ...
ALTER_DEFAULT_PRIVILEGES (7) - define default access privileges
Mail::SpamAssassin::Plugin::AntiVirus (3pm) - simple anti-virus tests
Apache2::Directive (3pm) - Perl API for manipulating the Apache configuration...
App::Prove::State::Result (3perl) - Individual test suite results.
App::Prove::State::Result::Test (3perl) - Individual test results.
apt-ftparchive (1)   - Utility to generate index files
apt-secure (8)       - Archive authentication support for APT
ar (1)               - create, modify, and extract from archives
ar86 (1)             - Create, modify, and extract from archive file
Archive::Tar (3perl) - module for manipulations of tar archives
Archive::Tar::File (3perl) - a subclass for in-memory extracted file from Arc...
Archive::Zip (3pm)   - Provide an interface to ZIP archive files.
Archive::Zip::FAQ (3pm) - Answers to a few frequently asked questions about A...
Archive::Zip::MemberRead (3pm) - A wrapper that lets you read Zip archive mem...
Archive::Zip::Tree (3pm) - (DEPRECATED) methods for adding/extracting trees u...
aspell (1)           - interactive spell checker
ata_build_rw_tf (9)  - Build ATA taskfile for given read/write request
ata_cmd_ioctl (9)    - Handler for HDIO_DRIVE_CMD ioctl
ata_dev_xfermask (9) - Compute supported xfermask of the given device
ata_host_activate (9) - start host, request IRQ and register it
ata_id_xfermask (9)  - Compute xfermask from the given IDENTIFY data
ata_is_40wire (9)    - check drive side detection
ata_link_offline (9) - test whether the given link is offline
ata_link_online (9)  - test whether the given link is online
ata_phys_link_offline (9) - test whether the given link is offline
ata_phys_link_online (9) - test whether the given link is online
ata_qc_complete (9)  - Complete an active ATA command
ata_read_native_max_address (9) - Read native max address
ata_scsi_unlock_native_capacity (9) - unlock native capacity
ata_task_ioctl (9)   - Handler for HDIO_DRIVE_TASK ioctl
ata_xfer_mask2mode (9) - Find matching XFER_* for the given xfer_mask
atomic_add_negative (9) - add and test if negative
audit_compare_dname_path (9) - compare given dentry name with last component ...
bdev_stack_limits (9) - adjust queue limits for stacked drivers
bindresvport (3)     - bind a socket to a privileged IP port
bitmap_onto (9)      - translate one bitmap relative to another
bitmap_pos_to_ord (9) - find ordinal of set bit at given position in bitmap
blk_end_request (9)  - Helper function for drivers to complete the request.
blk_end_request_all (9) - Helper function for drives to finish the request.
blk_free_tags (9)    - release a given set of tag maintenance info
blk_insert_cloned_request (9) - Helper for stacking drivers to submit a request
blk_lld_busy (9)     - Check if underlying low-level drivers of a device are ...
blk_queue_stack_limits (9) - inherit underlying queue limits for stacked drivers
blk_set_runtime_active (9) - Force runtime status of the queue to be active
blk_start_request (9) - start request processing on the driver
blk_update_request (9) - Special helper function for request stacking drivers
BN_div (3ssl)        - arithmetic operations on BIGNUMs
BN_div_recp (3ssl)   - modular multiplication using reciprocal
BN_div_word (3ssl)   - arithmetic functions on BIGNUMs with integers
bn_div_words (3ssl)  - BIGNUM library internal functions
bn_mul_low_recursive (3ssl) - BIGNUM library internal functions
bn_mul_part_recursive (3ssl) - BIGNUM library internal functions
bn_mul_recursive (3ssl) - BIGNUM library internal functions
bn_sqr_recursive (3ssl) - BIGNUM library internal functions
bounce (8postfix)    - Postfix delivery status reports
bsd-mailx (1)        - send and receive mail
btrfs-property (8)   - get/set/list properties for given btrfs object.
btrfs-receive (8)    - receive subvolumes from stdin/file.
BUF_memdup (3ssl)    - standard C library equivalents
BUF_strdup (3ssl)    - standard C library equivalents
BUF_strlcat (3ssl)   - standard C library equivalents
BUF_strlcpy (3ssl)   - standard C library equivalents
BUF_strndup (3ssl)   - standard C library equivalents
buildhash (1)        - Interactive spelling checking
builtin_driver (9)   - Helper macro for drivers that don't do anything specia...
builtin_i2c_driver (9) - Helper macro for registering a builtin I2C driver
bus_for_each_drv (9) - driver iterator
bus_register (9)     - register a driver-core subsystem
bus_rescan_devices (9) - rescan devices on the bus for possible drivers
calculate_imbalance (9) - Calculate the amount of imbalance present within th...
Carp (3perl)         - alternative warn and die for modules
Carp::Clan (3pm)     - Report errors from perspective of caller of a "clan" o...
cciss (4)            - HP Smart Array block driver
ccw_driver_register (9) - register a ccw driver
ccw_driver_unregister (9) - deregister a ccw driver
ccwgroup_driver_register (9) - register a ccw group driver
ccwgroup_driver_unregister (9) - deregister a ccw group driver
cfg80211_inform_bss_frame_data (9) - inform cfg80211 of a received BSS frame
cfg80211_rx_mgmt (9) - notification of received, unprocessed management frame
cgclassify (1)       - move running task(s) to given cgroups
cgexec (1)           - run the task in given control groups
cgget (1)            - print parameter(s) of given group(s)
cgset (1)            - set the parameters of given cgroup(s)
cgsnapshot (1)       - generate the configuration file for given controllers
chardet (1)          - universal character encoding detector
chardet3 (1)         - universal character encoding detector
chardetect (1)       - universal character encoding detector
chardetect3 (1)      - universal character encoding detector
check_conflicting_open (9) - see if the given dentry points to a file that ha...
chroot (8)           - run command or interactive shell with special root dir...
clamconf (1)         - Clam AntiVirus configuration utility
clamd.conf (5)       - Configuration file for Clam AntiVirus Daemon
clamdscan (1)        - scan files and directories for viruses using Clam Anti...
clamdtop (1)         - monitor the Clam AntiVirus Daemon
clamp (9)            - return a value clamped to a given range with strict ty...
clamp_t (9)          - return a value clamped to a given range using a given ...
clamp_val (9)        - return a value clamped to a given range using val's type
config_ep_by_speed (9) - configures the given endpoint according to gadget sp...
console_lock (9)     - lock the console system for exclusive use.
console_trylock (9)  - try to lock the console system for exclusive use.
Contextual::Return (3pm) - Create context-sensitive return values
corosync-blackbox (8) - Dump live "flight data" from the corosync "blackbox".
corosync-cfgtool (8) - An administrative tool for corosync.
corosync.conf (5)    - corosync executive configuration file
CPAN::Tarzip (3perl) - internal handling of tar archives for CPAN.pm
cpgr (8)             - copy with locking the given file to the password or gr...
cpio (1)             - copy files to and from archives
cppw (8)             - copy with locking the given file to the password or gr...
crc32 (1)            - compute CRC-32 checksums for the given files
crontab (1)          - maintain crontab files for individual users (Vixie Cron)
crontab (5)          - tables for driving cron
crypto_ablkcipher_ivsize (9) - obtain IV size
crypto_aead_ivsize (9) - obtain IV size
crypto_akcipher_set_priv_key (9) - Invoke set private key operation
crypto_blkcipher_decrypt_iv (9) - decrypt ciphertext with dedicated IV
crypto_blkcipher_encrypt_iv (9) - encrypt plaintext with dedicated IV
crypto_blkcipher_get_iv (9) - obtain IV from cipher
crypto_blkcipher_ivsize (9) - obtain IV size
crypto_blkcipher_set_iv (9) - set IV for cipher
crypto_skcipher_ivsize (9) - obtain IV size
d2i_DSAPrivateKey (3ssl) - DSA key encoding and parsing functions.
d2i_ECPrivate_key (3ssl) - Encode and decode functions for saving and reading...
d2i_ECPrivateKey (3ssl) - Encode and decode functions for saving and reading ...
d2i_Netscape_RSA (3ssl) - RSA public and private key encoding functions.
d2i_PKCS8PrivateKey (3ssl) - PKCS#8 format private key functions
d2i_PKCS8PrivateKey_bio (3ssl) - PKCS#8 format private key functions
d2i_PKCS8PrivateKey_fp (3ssl) - PKCS#8 format private key functions
d2i_RSA_PUBKEY (3ssl) - RSA public and private key encoding functions.
d2i_RSAPrivateKey (3ssl) - RSA public and private key encoding functions.
d2i_RSAPublicKey (3ssl) - RSA public and private key encoding functions.
d_find_any_alias (9) - find any alias for a given inode
d_obtain_alias (9)   - find or allocate a DISCONNECTED dentry for a given inode
d_obtain_root (9)    - find or allocate a dentry for a given inode
d_really_is_negative (9) - Determine if a dentry is really negative (ignoring...
d_really_is_positive (9) - Determine if a dentry is really positive (ignoring...
Data::Perl::Bool::MooseLike (3pm) - data::Perl::Bool subclass that simulates ...
Data::Perl::Collection::Array::MooseLike (3pm) - Collection::Array subclass t...
Data::Perl::Collection::Hash::MooseLike (3pm) - Collection::Hash subclass tha...
Data::Perl::Number::MooseLike (3pm) - data::Perl::Number subclass that simula...
Data::Perl::String::MooseLike (3pm) - data::Perl::String subclass that simula...
DateTime::Locale::Base (3pm) - DateTime locale package for "Base" - Base clas...
db5.3_archive (1)    - Find unused log files for archiving purposes
DBD::DBM (3pm)       - a DBI driver for DBM & MLDBM files
DBD::File (3pm)      - Base class for writing file based DBI drivers
DBD::File::HowTo (3pm) - Guide to create DBD::File based driver
DBD::Gofer (3pm)     - A stateless-proxy driver for communicating with a remo...
DBD::mysql (3pm)     - MySQL driver for the Perl5 Database Interface (DBI)
DBD::Pg (3pm)        - PostgreSQL database driver for the DBI module
DBD::Proxy (3pm)     - A proxy driver for the DBI
DBD::README (3pm)    - database driver for Perl
DBD::SQLite (3pm)    - Self-contained RDBMS in a DBI Driver
DBI::DBD (3pm)       - Perl DBI Database Driver Writer's Guide
DBI::DBD::SqlEngine (3pm) - Base class for DBI drivers without their own SQL ...
DBI::DBD::SqlEngine::HowTo (3pm) - Guide to create DBI::DBD::SqlEngine based ...
DBI::ProxyServer (3pm) - a server for the DBD::Proxy driver
dbiproxy (1p)        - A proxy server for the DBD::Proxy driver
dblink_build_sql_insert (3) - builds an INSERT statement using a local tuple,...
dblink_build_sql_update (3) - builds an UPDATE statement using a local tuple,...
dblink_cancel_query (3) - cancels any active query on the named connection
deactivate_locked_super (9) - drop an active reference to superblock
deactivate_super (9) - drop an active reference to superblock
deb-extra-override (5) - Debian archive extra override file
deb-override (5)     - Debian archive override file
debug_object_activate (9) - debug checks when an object is activated
debug_object_active_state (9) - debug checks object usage state machine
debug_object_deactivate (9) - debug checks when an object is deactivated
debugfs_remove_recursive (9) - recursively removes a directory
defer (8postfix)     - Postfix delivery status reports
del_timer (9)        - deactive a timer.
del_timer_sync (9)   - deactivate a timer and wait for the handler to finish.
deliver (1)          - Dovecot's local mail delivery agent
dentry_update_name_case (9) - update case insensitive dentry with a new name
dev_disable_lro (9)  - disable Large Receive Offload on a device
dev_driver_string (9) - Return a device's driver name, if at all possible
Devel::GlobalDestruction (3pm) - Provides function returning the equivalent o...
device_attach (9)    - try to attach device to a driver.
device_bind_driver (9) - bind a driver to one device.
device_release_driver (9) - manually detach device from driver.
device_reprobe (9)   - remove driver for a device and probe for a new driver
dh_make (8)          - prepare Debian packaging for an original source archive
dh_nativejava (1)    - compile jar files to native code and register them
discard (8postfix)   - Postfix discard mail delivery agent
disk_stack_limits (9) - adjust queue limits for stacked drivers
div (3)              - compute quotient and remainder of an integer division
dma_buf_detach (9)   - Remove the given attachment from dmabuf's attachments ...
dma_buf_fd (9)       - returns a file descriptor for the given dma_buf
dma_buf_mmap (9)     - Setup up a userspace mmap with the given vma
dnsq (1)             - sends a non-recursive DNS query to DNS server
doveadm-altmove (1)  - Move matching mails to the alternative storage (dbox-o...
doveadm-copy (1)     - Copy messages matching the given search query into ano...
doveadm-expunge (1)  - Expunge messages matching given search query
doveadm-import (1)   - Import messages matching given search query
doveadm-move (1)     - Move messages matching the given search query into ano...
doveadm-search (1)   - Show a list of mailbox GUIDs and message UIDs matching...
dovecot-lda (1)      - Dovecot's local mail delivery agent
dpkg-deb (1)         - Debian package archive (.deb) manipulation tool
dpkg-divert (8)      - override a package's version of a file
dpkg-split (1)       - Debian package archive split/join tool
driver_attach (9)    - try to bind driver to devices.
driver_create_file (9) - create sysfs file for driver.
driver_find (9)      - locate driver on a bus by its name.
driver_find_device (9) - device iterator for locating a particular device.
driver_for_each_device (9) - Iterator for devices bound to a driver.
driver_init (9)      - initialize driver model.
driver_register (9)  - register driver with bus
driver_remove_file (9) - remove sysfs file for driver.
driver_unregister (9) - remove driver from system.
dysize (3)           - get number of days for a given year
eaccess (3)          - check effective user's permissions for a file
enum_mac80211_rx_flags (9) - receive flags
enum_netdev_priv_flags (9) - struct net_device priv_flags
enum_positive_aop_returns (9) - aop return codes with specific semantics
enum_probe_type (9)  - device driver probe type to try Device drivers may opt...
error (8postfix)     - Postfix error/retry mail delivery agent
eth_proto_is_802_3 (9) - Determine if a given Ethertype/length is a protocol
ethtool (8)          - query or control network driver and hardware settings
euidaccess (3)       - check effective user's permissions for a file
EVP_CIPHER_CTX_iv_length (3ssl) - EVP cipher routines
EVP_CIPHER_iv_length (3ssl) - EVP cipher routines
EVP_PKEY_derive (3ssl) - derive public key algorithm shared secret.
EVP_PKEY_derive_init (3ssl) - derive public key algorithm shared secret.
EVP_PKEY_derive_set_peer (3ssl) - derive public key algorithm shared secret.
EVP_PKEY_free (3ssl) - private key allocation functions.
EVP_PKEY_new (3ssl)  - private key allocation functions.
EVP_PKEY_print_private (3ssl) - public key algorithm printing routines.
fakeroot (1)         - run a command in an environment faking root privileges...
fakeroot-sysv (1)    - run a command in an environment faking root privileges...
fakeroot-tcp (1)     - run a command in an environment faking root privileges...
Fatal (3perl)        - Replace functions with equivalents which succeed or die
fb_set_suspend (9)   - low level driver signals suspend
fcntl_getlease (9)   - Enquire what lease is currently active
fdim (3)             - positive difference
fdimf (3)            - positive difference
fdiml (3)            - positive difference
fgconsole (1)        - print the number of the active VT.
File::Copy::Recursive (3pm) - Perl extension for recursively copying files an...
File::NCopy (3pm)    - Deprecated module. Use File::Copy::Recursive instead. ...
find_min_pfn_with_active_regions (9) - Find the minimum PFN registered
find_next_best_node (9) - find the next node that should appear in a given no...
findaffix (1)        - Interactive spelling checking
free_bootmem_with_active_regions (9) - Call memblock_free_early_nid for each ...
freq_reg_info (9)    - get regulatory information for the given frequency
freshclam.conf (5)   - Configuration file for Clam AntiVirus database update ...
funzip (1)           - filter for extracting from a ZIP archive in a pipe
fusion_exit (9)      - Perform driver unload cleanup.
fusion_init (9)      - Fusion MPT base driver initialization routine.
futimesat (2)        - change timestamps of a file relative to a directory fi...
gen_estimator_active (9) - test if estimator is currently in use
gendsa (1ssl)        - generate a DSA private key from a set of parameters
generic_make_request (9) - hand a buffer to its device driver for I/O
generic_writepages (9) - walk the list of dirty pages of the given address sp...
genpkey (1ssl)       - generate a private key
genrsa (1ssl)        - generate an RSA private key
get_gendisk (9)      - get partitioning information for a given device
get_sd_load_idx (9)  - Obtain the load index for a given sched domain.
getresgid (2)        - get real, effective and saved user/group IDs
getresgid32 (2)      - get real, effective and saved user/group IDs
getresuid (2)        - get real, effective and saved user/group IDs
getresuid32 (2)      - get real, effective and saved user/group IDs
getseuserbyname (3)  - get SELinux username and level for a given Linux username
getty (8)            - alternative Linux getty
git-archive (1)      - Create an archive of files from a named tree
git-bundle (1)       - Move objects and refs by archive
git-fetch-pack (1)   - Receive missing objects from another repository
git-fsck (1)         - Verifies the connectivity and validity of the objects ...
git-fsck-objects (1) - Verifies the connectivity and validity of the objects ...
git-get-tar-commit-id (1) - Extract commit ID from an archive created using g...
git-index-pack (1)   - Build pack index file for an existing packed archive
git-name-rev (1)     - Find symbolic names for given revs
git-pack-objects (1) - Create a packed archive of objects
git-receive-pack (1) - Receive what is pushed into the repository
git-show-index (1)   - Show packed archive index
git-unpack-objects (1) - Unpack objects from a packed archive
git-upload-archive (1) - Send archive back to git-archive
git-verify-pack (1)  - Validate packed Git archive files
gkeytool-4.9 (1)     - Manage private keys and public certificates
gnupg (7)            - The GNU Privacy Guard suite of programs
GnuPG::Tie (3pm)     - Tied filehandle interface to encryption with the GNU P...
goaccess (1)         - fast web log analyzer and interactive viewer.
gpg-zip (1)          - encrypt or sign files into an archive
GRANT (7)            - define access privileges
grmid-4.9 (1)        - - RMI activation system daemon
grops (1)            - PostScript driver for groff
grotty (1)           - groff driver for typewriter-like devices
grub-fstest (1)      - debug tool for GRUB filesystem drivers
grub-mkrelpath (1)   - make a system path relative to its root
hddtemp (8)          - Utility to monitor hard drive temperature
hlist_for_each_entry (9) - iterate over list of given type
hlist_for_each_entry_safe (9) - iterate over list of given type safe against ...
hpsa (4)             - HP Smart Array SCSI driver
hrtimer_init (9)     - initialize a timer to the given clock
hrtimer_try_to_cancel (9) - try to deactivate a timer
hsi_register_client_driver (9) - Register an HSI client to the HSI bus
hsi_register_port_event (9) - Register a client to receive port events
hsi_unregister_port_event (9) - Stop receiving port events for a client
HTML::PullParser (3pm) - Alternative HTML::Parser interface
HTML::TokeParser (3pm) - Alternative HTML::Parser interface
i2c_del_driver (9)   - unregister I2C driver
i2c_lock_bus (9)     - Get exclusive access to an I2C bus segment
i2c_master_recv (9)  - issue a single I2C message in master receive mode
i2c_new_dummy (9)    - return a new i2c device bound to a dummy driver
i2c_smbus_read_byte (9) - SMBus “receive byte” protocol
i2c_unlock_bus (9)   - Release exclusive access to an I2C bus segment
i2d_DSAPrivateKey (3ssl) - DSA key encoding and parsing functions.
i2d_ECPrivateKey (3ssl) - Encode and decode functions for saving and reading ...
i2d_Netscape_RSA (3ssl) - RSA public and private key encoding functions.
i2d_PKCS8PrivateKey_bio (3ssl) - PKCS#8 format private key functions
i2d_PKCS8PrivateKey_fp (3ssl) - PKCS#8 format private key functions
i2d_PKCS8PrivateKey_nid_bio (3ssl) - PKCS#8 format private key functions
i2d_PKCS8PrivateKey_nid_fp (3ssl) - PKCS#8 format private key functions
i2d_RSA_PUBKEY (3ssl) - RSA public and private key encoding functions.
i2d_RSAPrivateKey (3ssl) - RSA public and private key encoding functions.
i2d_RSAPublicKey (3ssl) - RSA public and private key encoding functions.
icombine (1)         - Interactive spelling checking
id (1)               - print real and effective user and group IDs
ida_remove (9)       - remove the given ID
idr_get_next (9)     - lookup next object of id to given id.
idr_remove (9)       - remove the given id and free its slot
idr_replace (9)      - replace pointer for given id
ieee80211_beacon_loss (9) - inform hardware does not receive beacons
ieee80211_bss_get_ie (9) - find IE with given ID
ieee80211_get_response_rate (9) - get basic rate for a given rate
ieee80211_get_tkip_p1k_iv (9) - get a TKIP phase 1 key for IV32
ieee80211_iterate_active_interfaces (9) - iterate active interfaces
ieee80211_iterate_active_interfaces_a... (9) - iterate active interfaces
ieee80211_rx (9)     - receive frame
ieee80211_rx_irqsafe (9) - receive frame
ieee80211_rx_ni (9)  - receive frame (in process context)
ieee80211_sta_set_buffered (9) - inform mac80211 about driver-buffered frames
ieee80211_start_tx_ba_cb_irqsafe (9) - low level driver ready to aggregate.
ieee80211_stop_tx_ba_cb_irqsafe (9) - low level driver ready to stop aggregate.
iio_device_alloc (9) - allocate an iio_dev from a driver
iio_device_free (9)  - free an iio_dev from a driver
ijoin (1)            - Interactive spelling checking
imaxdiv (3)          - compute quotient and remainder of an integer division
inode_inc_iversion (9) - increments i_version
inode_permission (9) - Check for access rights to a given inode
input_get_keycode (9) - retrieve keycode currently mapped to a given scancode
input_grab_device (9) - grabs device for exclusive use
input_mt_drop_unused (9) - Inactivate slots not seen in this frame
input_set_events_per_packet (9) - tell handlers about the driver event rate
input_set_keycode (9) - attribute a keycode to a given scancode
intro (8)            - introduction to administration and privileged commands
IO::Socket::SSL::PublicSuffix (3pm) - provide access to Mozillas list of effe...
iopl (2)             - change I/O privilege level
irb (1)              - Interactive Ruby Shell
irb2.1 (1)           - Interactive Ruby Shell
irq_force_affinity (9) - Force the irq affinity of a given irq
irq_set_affinity (9) - Set the irq affinity of a given irq
irq_setup_alt_chip (9) - Switch to alternative chip
is_etherdev_addr (9) - Tell if given Ethernet address belongs to the device.
is_link_local_ether_addr (9) - Determine if given Ethernet address is link-local
is_valid_ether_addr (9) - Determine if the given Ethernet address is valid
is_zero_ether_addr (9) - Determine if give Ethernet address is all zeros.
ispell (1)           - Interactive spelling checking
iterate_supers_type (9) - call function for superblocks of given type
jbd2_journal_set_features (9) - Mark a given journal feature in the superblock
kernel_recvmsg (9)   - Receive a message from a socket (kernel space)
kobject_get_path (9) - generate and return the path associated with a given k...
ksize (9)            - get the actual amount of memory allocated for a given ...
lastlog (8)          - reports the most recent login of all users or of a giv...
ldiv (3)             - compute quotient and remainder of an integer division
links (1)            - lynx-like alternative character mode WWW browser
list_for_each_entry (9) - iterate over list of given type
list_for_each_entry_continue (9) - continue iteration over list of given type
list_for_each_entry_continue_reverse (9) - iterate backwards from the given p...
list_for_each_entry_from (9) - iterate over list of given type from the curre...
list_for_each_entry_reverse (9) - iterate backwards over list of given type.
list_for_each_entry_safe (9) - iterate over list of given type safe against r...
lldiv (3)            - compute quotient and remainder of an integer division
local (8postfix)     - Postfix local mail delivery
locks_mandatory_locked (9) - Check for an active lock
look (1)             - display lines beginning with a given string
lssubsys (1)         - list hierarchies containing given subsystem
lvmsadc (8)          - LVM system activity data collector
lvmsar (8)           - LVM system activity reporter
lxc-usernet (5)      - unprivileged user network administration file.
madvise (2)          - give advice about use of memory
mail (1)             - send and receive mail
Mail::Box::FastScalar (3pm) - fast alternative to IO::Scalar
Mail::DKIM::PrivateKey (3pm) - a private key loaded in memory for DKIM signing
Mail::Message::Head::ResentGroup (3pm) - header fields tracking message delivery
Mail::SpamAssassin::AICache (3pm) - provide access to cached information for ...
Mail::SpamAssassin::ArchiveIterator (3pm) - find and process messages one at ...
Mail::Transport::POP3 (3pm) - receive messages via POP3
Mail::Transport::Receive (3pm) - receive messages
mailstat (1)         - shows mail-arrival statistics
mailx (1)            - send and receive mail
maple_driver_register (9) - register a maple driver
maple_driver_unregister (9) - unregister a maple driver.
match_string (9)     - matches given string in an array
md (4)               - Multiple Device driver aka Linux Software RAID
mdio_bus_match (9)   - determine if given MDIO driver supports the given MDIO...
mdiobus_read (9)     - Convenience function for reading a given MII mgmt regi...
mdiobus_write (9)    - Convenience function for writing a given MII mgmt regi...
memset (9)           - Fill a region of memory with the given value
memzero_explicit (9) - Fill a region of memory (e.g. sensitive keying data) w...
module_driver (9)    - Helper macro for drivers that don't do anything specia...
module_i2c_driver (9) - Helper macro for registering a modular I2C driver
module_spi_driver (9) - Helper macro for registering a SPI driver
module_usb_composite_driver (9) - Helper macro for registering a USB gadget c...
module_usb_driver (9) - Helper macro for registering a USB driver
Moose::Cookbook::Meta::PrivateOrPubli... (3pm) - A method metaclass for marki...
Moose::Manual::Roles (3pm) - Roles, an alternative to deep hierarchies and ba...
Moose::Meta::Attribute::Native (3pm) - Delegate to native Perl types
Moose::Meta::Attribute::Native::Trait (3pm) - Shared role for native delegati...
Moose::Meta::Attribute::Native::Trait... (3pm) - Helper trait for ArrayRef at...
Moose::Meta::Attribute::Native::Trait... (3pm) - Helper trait for Bool attrib...
Moose::Meta::Attribute::Native::Trait... (3pm) - Helper trait for CodeRef att...
Moose::Meta::Attribute::Native::Trait... (3pm) - Helper trait for Int attribu...
Moose::Meta::Attribute::Native::Trait... (3pm) - Helper trait for HashRef att...
Moose::Meta::Attribute::Native::Trait... (3pm) - Helper trait for Num attributes
Moose::Meta::Attribute::Native::Trait... (3pm) - Helper trait for Str attributes
MooX::HandlesVia (3pm) - NativeTrait-like behavior for Moo.
move_pages (2)       - move individual pages of a process to another node
mpage_writepages (9) - walk the list of dirty pages of the given address spac...
mpt_deregister (9)   - Deregister a protocol drivers resources.
mpt_device_driver_deregister (9) - DeRegister device driver hooks
mpt_device_driver_register (9) - Register device driver hooks
mpt_get_cb_idx (9)   - obtain cb_idx for registered driver
mpt_handshake_req_reply_wait (9) - Send MPT request to and receive reply from...
mpt_inactive_raid_list_free (9) - This clears this link list.
mpt_inactive_raid_volumes (9) - sets up link list of phy_disk_nums for device...
mpt_resume (9)       - Fusion MPT base driver resume routine.
mpt_Soft_Hard_ResetHandler (9) - Try less expensive reset
mpt_SoftResetHandler (9) - Issues a less expensive reset
mpt_suspend (9)      - Fusion MPT base driver suspend routine.
mpt_verify_adapter (9) - Given IOC identifier, set pointer to its adapter str...
mptbase_reply (9)    - MPT base driver's callback routine
mptscsih_taskmgmt_complete (9) - Registered with Fusion MPT base driver
mq_receive (3)       - receive a message from a message queue
mq_timedreceive (2)  - receive a message from a message queue
mq_timedreceive (3)  - receive a message from a message queue
mt (1)               - control magnetic tape drive operation
mt-gnu (1)           - control magnetic tape drive operation
munchlist (1)        - Interactive spelling checking
mysql_convert_table_format (1) - convert tables to use a given storage engine
mysql_setpermission (1) - interactively set permissions in grant tables
mysqlaccess (1)      - client for checking access privileges
nand_block_markbad (9) - [MTD Interface] Mark block at the given offset as bad
ncftpbatch (1)       - Individual batch FTP job processor
Net::DBus::Callback (3pm) - a callback for receiving reactor events
Net::DNS::Resolver::Recurse (3pm) - DNS recursive resolver
netdev_is_rx_handler_busy (9) - check if receive handler is registered
netdev_lower_get_first_private_rcu (9) - Get the first - >private from the lo...
netdev_lower_get_next_private (9) - Get the next - >private from the lower ne...
netdev_lower_get_next_private_rcu (9) - Get the next - >private from the lowe...
netdev_priv (9)      - access network device private data
netdev_rx_handler_register (9) - register receive handler
netdev_rx_handler_unregister (9) - unregister receive handler
netif_receive_skb (9) - process receive buffer from network
nm86 (1)             - Examine object, archive or executable files
nologin (5)          - prevent unprivileged users from logging into the system
notmuch-count (1)    - count messages matching the given search terms
notmuch-restore (1)  - restores the tags from the given file (see notmuch dump)
notmuch-search (1)   - search for messages matching the given search terms
notmuch-show (1)     - show messages matching the given search terms
nslookup (1)         - query Internet name servers interactively
objdump86 (1)        - Examine object, archive or executable files
of_mdio_find_bus (9) - Given an mii_bus node, find the mii_bus.
ogginfo (1)          - gives information about Ogg files, and does extensive ...
pam_lastlog (8)      - PAM module to display date of last login and perform i...
parport_announce_port (9) - tell device drivers about a parallel port
parport_release (9)  - give up access to a parallel port device
parport_set_timeout (9) - set the inactivity timeout for a device
parport_unregister_driver (9) - deregister a parallel port device driver
pax (1)              - read and write file archives and copy directory hierar...
paxcpio (1)          - copy file archives in and out
paxtar (1)           - tape archiver
pci_add_dynid (9)    - add a new PCI device ID to this driver and re-probe de...
pci_bus_add_device (9) - start driver for a single device
pci_bus_add_devices (9) - start driver for PCI devices
pci_bus_max_busnr (9) - returns maximum PCI bus number of given bus' children
pci_dev_driver (9)   - get the pci_driver of a device
pci_enable_device (9) - Initialize device before it's used by a driver.
pci_find_bus (9)     - locate PCI bus from a given domain and bus number
pci_find_parent_resource (9) - return resource region of parent bus of given ...
pci_get_domain_bus_and_slot (9) - locate PCI device for a given PCI domain (s...
pci_get_slot (9)     - locate PCI device for a given PCI slot
pci_hp_create_module_link (9) - create symbolic link to the hotplug driver mo...
pci_hp_remove_module_link (9) - remove symbolic link to the hotplug driver mo...
pci_match_id (9)     - See if a pci device matches a given pci_id table
pci_num_vf (9)       - return number of VFs associated with a PF device_relea...
pci_pme_active (9)   - enable or disable PCI device's PME# function
pci_request_region_exclusive (9) - Reserved PCI I/O and memory resource
pci_request_regions_exclusive (9) - Reserved PCI I/O and memory resources
pci_unregister_driver (9) - unregister a pci driver
pcimodules (8)       - List kernel driver modules available for all currently...
PEM_read_bio_DSAPrivateKey (3ssl) - PEM routines
PEM_read_bio_PrivateKey (3ssl) - PEM routines
PEM_read_bio_RSAPrivateKey (3ssl) - PEM routines
PEM_read_DSAPrivateKey (3ssl) - PEM routines
PEM_read_PrivateKey (3ssl) - PEM routines
PEM_read_RSAPrivateKey (3ssl) - PEM routines
PEM_write_bio_DSAPrivateKey (3ssl) - PEM routines
PEM_write_bio_PKCS8PrivateKey (3ssl) - PEM routines
PEM_write_bio_PKCS8PrivateKey_nid (3ssl) - PEM routines
PEM_write_bio_PrivateKey (3ssl) - PEM routines
PEM_write_bio_RSAPrivateKey (3ssl) - PEM routines
PEM_write_DSAPrivateKey (3ssl) - PEM routines
PEM_write_PKCS8PrivateKey (3ssl) - PEM routines
PEM_write_PKCS8PrivateKey_nid (3ssl) - PEM routines
PEM_write_PrivateKey (3ssl) - PEM routines
PEM_write_RSAPrivateKey (3ssl) - PEM routines
perlivp (1)          - Perl Installation Verification Procedure
pg_archivecleanup (1) - clean up PostgreSQL WAL archive files
pg_dump (1)          - extract a PostgreSQL database into a script file or ot...
pg_receivewal (1)    - stream write-ahead logs from a PostgreSQL server
pg_restore (1)       - restore a PostgreSQL database from an archive file cre...
phar (1)             - PHAR (PHP archive) command line tool
phar5 (1)            - PHAR (PHP archive) command line tool
phy_attach_direct (9) - attach a network device to a given PHY device pointer
phy_driver_register (9) - register a phy_driver with the PHY layer
pid_alive (9)        - check that a task structure is not stale
pipe (8postfix)      - Postfix delivery to external command
pivot_root (2)       - change the root filesystem
pivot_root (8)       - change the root filesystem
pkcs8 (1ssl)         - PKCS#8 format private key conversion tool
pkey (1ssl)          - public or private key processing tool
platform_driver_unregister (9) - unregister a driver for platform-level devices
platform_unregister_drivers (9) - unregister an array of platform drivers
pnp_activate_dev (9) - activates a PnP device for use
pnp_is_active (9)    - Determines if a device is active based on its current ...
pnp_register_card_driver (9) - registers a PnP card driver with the PnP Layer
pnp_release_card_device (9) - call this when the driver no longer needs the d...
pnp_unregister_card_driver (9) - unregisters a PnP card driver from the PnP L...
pread (2)            - read from or write to a file descriptor at a given offset
pread64 (2)          - read from or write to a file descriptor at a given offset
priv_to_wiphy (9)    - return the wiphy containing the priv
pskb_trim_rcsum (9)  - trim received skb and update checksum
psql (1)             - PostgreSQL interactive terminal
ptardiff (1)         - program that diffs an extracted archive against an une...
ptargrep (1)         - Apply pattern matching to the contents of files in a t...
pthread_testcancel (3) - request delivery of any pending cancellation request
pwm_get_chip_data (9) - get private chip data for a PWM
pwm_get_relative_duty_cycle (9) - Get a relative duty cycle value
pwm_request_from_chip (9) - request a PWM device relative to a PWM chip
pwm_set_chip_data (9) - set private chip data for a PWM
pwm_set_relative_duty_cycle (9) - Set a relative duty cycle value
pwrite (2)           - read from or write to a file descriptor at a given offset
pwrite64 (2)         - read from or write to a file descriptor at a given offset
pygettext (1)        - Python equivalent of xgettext(1)
pygettext2.7 (1)     - Python equivalent of xgettext(1)
pygettext3 (1)       - Python equivalent of xgettext(1)
pygettext3.4 (1)     - Python equivalent of xgettext(1)
python (1)           - an interpreted, interactive, object-oriented programmi...
python2 (1)          - an interpreted, interactive, object-oriented programmi...
python2.7 (1)        - an interpreted, interactive, object-oriented programmi...
python3 (1)          - an interpreted, interactive, object-oriented programmi...
python3.4 (1)        - an interpreted, interactive, object-oriented programmi...
python3.4m (1)       - an interpreted, interactive, object-oriented programmi...
python3m (1)         - an interpreted, interactive, object-oriented programmi...
ranlib (1)           - generate index to archive.
rate_control_send_low (9) - helper for drivers for management/no-ack frames
rdev_get_drvdata (9) - get rdev regulator driver data
read_abs_bbt (9)     - [GENERIC] Read the bad block table starting at a given...
read_abs_bbts (9)    - [GENERIC] Read the bad block table(s) for all chips st...
reallocate_resource (9) - allocate a slot in the resource tree given range & ...
recv (2)             - receive a message from a socket
recvfrom (2)         - receive a message from a socket
recvmmsg (2)         - receive multiple messages on a socket
recvmsg (2)          - receive a message from a socket
regulator_get_drvdata (9) - get regulator driver data
regulator_get_exclusive (9) - obtain exclusive access to a regulator.
regulator_set_drvdata (9) - set regulator driver data
regulatory_hint (9)  - driver hint to the wireless core a regulatory domain
reservation_object_add_excl_fence (9) - Add an exclusive fence.
reservation_object_get_excl (9) - get the reservation object's exclusive fenc...
reservation_object_get_excl_rcu (9) - get the reservation object's exclusive ...
reservation_object_get_fences_rcu (9) - Get an object's shared and exclusive ...
reservation_object_wait_timeout_rcu (9) - Wait on reservation's objects share...
revalidate_disk (9)  - wrapper for lower-level driver's revalidate_disk call-...
REVOKE (7)           - remove access privileges
rhino (1)            - invokes the JavaScript shell for running scripts in ba...
rio_destid_alloc (9) - Allocate next available destID for given network
rio_destid_reserve (9) - Reserve the specivied destID
rio_disc_peer (9)    - Recursively discovers a RIO network through a master port
rio_enable_rx_tx_port (9) - enable input receiver and output transmitter of g...
rio_enum_peer (9)    - Recursively enumerate a RIO network through a master port
rio_get_drvdata (9)  - Get RIO driver specific data
rio_match_bus (9)    - Tell if a RIO device structure has a matching RIO driv...
rio_mport_is_active (9) - Tests if master port link is active
rio_register_driver (9) - register a new RIO driver
rio_set_drvdata (9)  - Set RIO driver specific data
rio_sport_is_active (9) - Tests if a switch port has an active connection.
rio_unregister_driver (9) - unregister a RIO driver
rmail (8)            - handle remote mail received via uucp
rmid (1)             - The Java RMI Activation System Daemon
round_jiffies_relative (9) - function to round jiffies to a full second
round_jiffies_up_relative (9) - function to round jiffies up to a full second
rpcb_getport_async (9) - obtain the port for a given RPC service on a given host
rpm2cpio (8)         - Extract cpio archive from RPM Package Manager (RPM) pa...
rpmatch (3)          - determine if the answer to a question is affirmative o...
RSA_check_key (3ssl) - validate private RSA keys
RSA_private_decrypt (3ssl) - RSA public key cryptography
RSA_private_encrypt (3ssl) - low level signature operations
sa-compile (1p)      - compile SpamAssassin ruleset into native code
sa1 (8)              - Collect and store binary data in the system activity d...
sa2 (8)              - Create a report from the current standard system activ...
sadc (8)             - System activity data collector.
sar (1)              - Collect, report, or save system activity information.
sar.sysstat (1)      - Collect, report, or save system activity information.
saxon-xslt (1)       - Apply a given style sheet to a given source XML document
SCPNT_TO_LOOKUP_IDX (9) - searches for a given scmd in the ScsiLookup[] array...
scsi_device_lookup (9) - find a device given the host
scsi_device_lookup_by_target (9) - find a device given the target
scsi_device_set_state (9) - Take the given device through the device state mo...
scsi_host_set_state (9) - Take the given host through the host state model.
scsi_nl_rcv_msg (9)  - Receive message handler.
scsi_report_opcode (9) - Find out if a given command opcode is supported
sctp_darn (1)        - Send and receive messages via SCTP
sctp_test (1)        - Send and receive messages via SCTP
sd (4)               - driver for SCSI disk drives
security_get_boolean_active (3) - routines for manipulating SELinux boolean v...
security_module_enable (9) - Load given security module on boot ?
selinux_binary_policy_path (3) - These functions return the paths to the acti...
selinux_booleans_path (3) - These functions return the paths to the active SE...
selinux_colors_path (3) - Return a path to the active SELinux policy color co...
selinux_contexts_path (3) - These functions return the paths to the active SE...
selinux_current_policy_path (3) - These functions return the paths to the act...
selinux_default_context_path (3) - These functions return the paths to the ac...
selinux_default_type_path (3) - These functions return the paths to the activ...
selinux_failsafe_context_path (3) - These functions return the paths to the a...
selinux_file_context_homedir_path (3) - These functions return the paths to t...
selinux_file_context_local_path (3) - These functions return the paths to the...
selinux_file_context_path (3) - These functions return the paths to the activ...
selinux_homedir_context_path (3) - These functions return the paths to the ac...
selinux_media_context_path (3) - These functions return the paths to the acti...
selinux_netfilter_context_path (3) - These functions return the paths to the ...
selinux_path (3)     - These functions return the paths to the active SELinux...
selinux_removable_context_path (3) - These functions return the paths to the ...
selinux_securetty_types_path (3) - These functions return the paths to the ac...
selinux_user_contexts_path (3) - These functions return the paths to the acti...
selinux_usersconf_path (3) - These functions return the paths to the active S...
selinux_x_context_path (3) - These functions return the paths to the active S...
set_primary_fwnode (9) - Change the primary firmware node of a given device.
setegid (2)          - set effective user or group ID
seteuid (2)          - set effective user or group ID
setregid (2)         - set real and/or effective user or group ID
setregid32 (2)       - set real and/or effective user or group ID
setresgid (2)        - set real, effective and saved user or group ID
setresgid32 (2)      - set real, effective and saved user or group ID
setresuid (2)        - set real, effective and saved user or group ID
setresuid32 (2)      - set real, effective and saved user or group ID
setreuid (2)         - set real and/or effective user or group ID
setreuid32 (2)       - set real and/or effective user or group ID
shar (1)             - create a shell archive
shtoolize (1)        - Build individual GNU shtool scripts
signal_delivered (9) - (unknown subject)
size86 (1)           - Examine object, archive or executable files
sk98lin (4)          - Marvell/SysKonnect Gigabit Ethernet driver v6.21
sk_for_each_entry_offset_rcu (9) - iterate over a list at a given struct offset
sk_wait_data (9)     - wait for data to arrive at sk_receive_queue
skb_copy (9)         - create private copy of an sk_buff
skb_gso_network_seglen (9) - Return length of individual segments of a gso pa...
skb_gso_transport_seglen (9) - Return length of individual segments of a gso ...
skb_gso_validate_mtu (9) - Return in case such skb fits a given MTU
skb_needs_linearize (9) - check if we need to linearize a given skb depending...
skb_peek_next (9)    - peek skb following the given one from a queue
skb_postpull_rcsum (9) - update checksum for received skb after pull
skb_postpush_rcsum (9) - update checksum for received skb after push
skb_pull_rcsum (9)   - pull skb and update receive checksum
skb_push_rcsum (9)   - push skb and update receive checksum
skb_tx_timestamp (9) - Driver hook for transmit timestamping
slapo-collect (5)    - Collective attributes overlay to slapd
smbtar (1)           - shell script for backing up SMB/CIFS shares directly t...
snd_ac97_pcm_assign (9) - assign AC97 slots to given PCM streams
snd_ac97_pcm_close (9) - closes the given AC97 pcm
snd_ac97_pcm_open (9) - opens the given AC97 pcm
snd_ac97_read (9)    - read a value from the given register
snd_ac97_set_rate (9) - change the rate of the given input/output.
snd_ac97_update (9)  - update the value on the given register
snd_ac97_update_bits (9) - update the bits on the given register
snd_ac97_write (9)   - write a value on the given register
snd_ac97_write_cache (9) - write a value on the given register and update the...
snd_BUG (9)          - give a BUG warning message and stack trace
snd_card_free (9)    - frees given soundcard structure
snd_ctl_activate_id (9) - activate/inactivate the control of the given id
snd_ctl_find_id (9)  - find the control instance with the given id
snd_ctl_find_numid (9) - find the control instance with the given number-id
snd_ctl_remove_id (9) - remove the control of the given id and release it
snd_dma_alloc_pages (9) - allocate the buffer area according to the given type
snd_dma_alloc_pages_fallback (9) - allocate the buffer area according to the ...
snd_info_create_card_entry (9) - create an info entry for the given card
snd_info_create_module_entry (9) - create an info entry for the given module
snd_malloc_pages (9) - allocate pages with the given size
snd_pcm_chmap_substream (9) - get the PCM substream assigned to the given chm...
snd_pcm_format_name (9) - Return a name string for the given PCM format
snd_pcm_format_size (9) - return the byte size of samples on the given format
snd_pcm_hw_constraint_mask64 (9) - apply the given bitmap mask constraint
snd_pcm_lib_preallocate_pages (9) - pre-allocation for the given DMA type
snd_pcm_sgbuf_get_chunk_size (9) - Compute the max size that fits within the ...
snd_pcm_sgbuf_ops_page (9) - get the page struct at the given offset
snd_pcm_suspend_all (9) - trigger SUSPEND to all substreams in the given pcm
snd_rawmidi_receive (9) - receive the input data from the device
snd_soc_dai_set_clkdiv (9) - configure DAI clock dividers.
snd_unregister_device (9) - unregister the device on the given card
sparse_keymap_report_entry (9) - report event corresponding to given key entry
sparse_keymap_report_event (9) - report event corresponding to given scancode
sparse_memory_present_with_active_reg... (9) - Call memory_present for each a...
spi_async_locked (9) - version of spi_async with exclusive bus usage
spi_bus_lock (9)     - obtain a lock for exclusive SPI bus usage
spi_bus_unlock (9)   - release the lock for exclusive SPI bus usage
spi_get_next_queued_message (9) - called by driver to check for queued messages
SPI_modifytuple (3)  - create a row by replacing selected fields of a given row
spi_register_board_info (9) - register SPI devices for a given board
spi_split_transfers_maxsize (9) - split spi transfers into multiple transfers...
spi_sync_locked (9)  - version of spi_sync with exclusive bus usage
spi_unregister_driver (9) - reverse effect of spi_register_driver
ssh-add (1)          - adds private key identities to the authentication agent
SSL_check_private_key (3ssl) - load certificate and key data
SSL_CTX_check_private_key (3ssl) - load certificate and key data
SSL_CTX_use_PrivateKey (3ssl) - load certificate and key data
SSL_CTX_use_PrivateKey_ASN1 (3ssl) - load certificate and key data
SSL_CTX_use_PrivateKey_file (3ssl) - load certificate and key data
SSL_CTX_use_RSAPrivateKey (3ssl) - load certificate and key data
SSL_CTX_use_RSAPrivateKey_ASN1 (3ssl) - load certificate and key data
SSL_CTX_use_RSAPrivateKey_file (3ssl) - load certificate and key data
SSL_use_PrivateKey (3ssl) - load certificate and key data
SSL_use_PrivateKey_ASN1 (3ssl) - load certificate and key data
SSL_use_PrivateKey_file (3ssl) - load certificate and key data
SSL_use_RSAPrivateKey (3ssl) - load certificate and key data
SSL_use_RSAPrivateKey_ASN1 (3ssl) - load certificate and key data
SSL_use_RSAPrivateKey_file (3ssl) - load certificate and key data
strncasecmp (9)      - Case insensitive, length-limited string comparison
struct_ccw_driver (9) - device driver for channel attached devices
struct_ccwgroup_driver (9) - driver for ccw group devices
struct_device_driver (9) - The basic device driver structure
struct_fence (9)     - software synchronization primitive
struct_hsi_client_driver (9) - Driver associated to an HSI client
struct_i2c_driver (9) - represent an I2C device driver
struct_ieee80211_ops (9) - callbacks from mac80211 to the driver
struct_ieee80211_rx_status (9) - receive status
struct_kgdb_io (9)   - Describe the interface for an I/O driver to talk with ...
struct_nand_chip (9) - NAND Private Flash Chip Data
struct_rio_driver (9) - RIO driver info
struct_spi_driver (9) - Host side “protocol” driver
struct_usb_class_driver (9) - identifies a USB driver that wants to use the U...
struct_usb_composite_driver (9) - groups configurations into a gadget
struct_usb_device_driver (9) - identifies USB device driver to usbcore
struct_usb_driver (9) - identifies USB interface driver to usbcore
struct_usb_gadget_driver (9) - driver for usb 'slave' devices
struct_usb_gadget_strings (9) - a set of USB strings in a given language
struct_usb_interface (9) - what usb device drivers talk to
struct_usbdrv_wrap (9) - wrapper for driver-model structure
stunnel (8)          - universal SSL tunnel
stunnel3 (8)         - universal SSL tunnel
stunnel4 (8)         - universal SSL tunnel
Sub::Exporter::Cookbook (3pm) - useful, demonstrative, or stupid Sub::Exporte...
Sub::Exporter::Progressive (3pm) - Only use Sub::Exporter if you need it
superhyway_register_driver (9) - Register a new SuperHyway driver
superhyway_unregister_driver (9) - Unregister a SuperHyway driver
Switch (3pm)         - A switch statement for Perl, do not use if you can use...
synchronize_net (9)  - Synchronize with packet receive processing
Sys::Hostname (3perl) - Try every conceivable way to get hostname
Sys::Hostname::Long (3pm) - Try every conceivable way to get full hostname
sys_rt_sigsuspend (9) - replace the signal mask for a value with the unewset ...
systemd-activate (8) - Test socket activation of daemons
systemd-cgls (1)     - Recursively show control group contents
systemd.directives (7) - Index of configuration directives
sysusers.d (5)       - Declarative allocation of system users and groups
TAP::Parser::IteratorFactory (3perl) - Figures out which SourceHandler object...
tar (1)              - The GNU version of the tar archiving utility
tarcat (1)           - concatenates the pieces of a GNU tar multi-volume archive
task_nice (9)        - return the nice value of a given task.
tc-codel (8)         - Controlled-Delay Active Queue Management algorithm
termio (7)           - System V terminal driver interface
Tie::IxHash (3pm)    - ordered associative arrays for Perl
trace (8postfix)     - Postfix delivery status reports
trace_block_rq_complete (9) - block IO operation completed by device driver
trace_block_rq_issue (9) - issue pending block IO request operation to device...
trace_signal_deliver (9) - called when a signal is delivered
trace_workqueue_activate_work (9) - called when a work gets activated
trivial-rewrite (8postfix) - Postfix address rewriting and resolving daemon
try_to_del_timer_sync (9) - Try to deactivate a timer
tryaffix (1)         - Interactive spelling checking
ualarm (3)           - schedule signal after given number of microseconds
uart_add_one_port (9) - attach a driver-defined port structure
uart_get_divisor (9) - return uart clock divisor
uart_register_driver (9) - register a driver with the uart core layer
uart_remove_one_port (9) - detach a driver defined port structure
uart_unregister_driver (9) - remove a driver from the uart core layer
unicode (7)          - universal character set
UNIVERSAL (3perl)    - base class for ALL classes (blessed references)
unix_update (8)      - Helper binary that updates the password of a given user
unshar (1)           - unpack a shar archive
unzip (1)            - list, test and extract compressed files in a ZIP archive
unzipsfx (1)         - self-extracting stub for prepending to ZIP archives
update-alternatives (8) - maintain symbolic links determining default commands
update-java-alternatives (8) - update alternatives for jre/sdk installations
update-smart-drivedb (8) - update smartmontools drive database
usb_alloc_urb (9)    - creates a new urb for a USB driver to use
usb_altnum_to_altsetting (9) - get the altsetting structure with a given alte...
usb_composite_probe (9) - register a composite driver
usb_composite_unregister (9) - unregister a composite driver
usb_deregister (9)   - unregister a USB interface driver
usb_deregister_device_driver (9) - unregister a USB device (not interface) dr...
usb_driver_claim_interface (9) - bind a driver to an interface
usb_driver_release_interface (9) - unbind a driver from an interface
usb_driver_set_configuration (9) - Provide a way for drivers to change device...
usb_find_alt_setting (9) - Given a configuration, find the alternate setting ...
usb_find_interface (9) - find usb_interface pointer for driver and device
usb_function_activate (9) - allow function and gadget enumeration
usb_function_deactivate (9) - prevent function and gadget enumeration
usb_gadget_probe_driver (9) - probe a gadget driver
usb_gadget_unregister_driver (9) - unregister a gadget driver
usb_get_maximum_speed (9) - Get maximum requested speed for a given USB contr...
usb_hcd_giveback_urb (9) - return URB from HCD to device driver
usb_ifnum_to_if (9)  - get the interface object with a given interface number
usb_init_urb (9)     - initializes a urb so that it can be used by a USB driver
usb_register_device_driver (9) - register a USB device (not interface) driver
usb_register_driver (9) - register a USB interface driver
usb_reset_device (9) - warn interface drivers and perform a USB port reset
User::Identity::Archive (3pm) - base class for archiving user information
User::Identity::Archive::Plain (3pm) - simple, plain text archiver
validlocale (8)      - Test if a given locale is available
vfs_path_lookup (9)  - lookup a file path relative to a dentry-vfsmount pair
virtual (8postfix)   - Postfix virtual domain mail delivery agent
w1_register_family (9) - register a device family driver
w1_unregister_family (9) - unregister a device family driver
wait_event_interruptible_exclusive_lo... (9) - sleep exclusively until a cond...
wait_event_interruptible_exclusive_lo... (9) - sleep until a condition gets true
waitqueue_active (9) - - locklessly test for waiters on the queue
wavelan (4)          - AT&T GIS WaveLAN ISA device driver
wdev_priv (9)        - return wiphy priv from wireless_dev
wget (1)             - The non-interactive network downloader.
who@ (1)             - prints the list of active users on a remote host.
whoami (1)           - print effective userid
whois.conf (5)       - alternative WHOIS servers list for whois client
wiphy_apply_custom_regulatory (9) - apply a custom driver regulatory domain
wiphy_priv (9)       - return priv from wiphy
workqueue_set_max_active (9) - adjust max_active of a workqueue
write_cache_pages (9) - walk the list of dirty pages of the given address spa...
writeback_inodes_sb (9) - writeback dirty inodes from given super_block
writeback_inodes_sb_nr (9) - writeback dirty inodes from given super_block
www-browser (1)      - lynx-like alternative character mode WWW browser
WWW::RobotRules (3pm) - database of robots.txt-derived permissions
x86_64-linux-gnu-ar (1) - create, modify, and extract from archives
x86_64-linux-gnu-ranlib (1) - generate index to archive.
xdriinfo (1)         - query configuration information of DRI drivers
xrandr (1)           - primitive command line interface to RandR extension
z8530_rx (9)         - Handle a PIO receive event
z8530_rx_done (9)    - Receive completion callback
z8530_sync_txdma_close (9) - Close down a TX driven DMA channel
z8530_sync_txdma_open (9) - Open a Z8530 for TX driven DMA
zip (1)              - package and compress (archive) files
zipgrep (1)          - search files in a ZIP archive for lines matching a pat...
zipinfo (1)          - list detailed information about a ZIP archive
Archive::Any::Lite (3pm) - simple CPAN package extractor
File::TreeCreate (3pm) - recursively create a directory tree.
Getopt::Long::Descriptive (3pm) - Getopt::Long, but simpler and more powerful
Getopt::Long::Descriptive::Opts (3pm) - object representing command line swit...
Getopt::Long::Descriptive::Usage (3pm) - the usage description for GLD
Lucy::Analysis::CaseFolder (3pm) - Normalize case, facilitating case-insensit...
Lucy::Search::TermQuery (3pm) - Query which matches individual terms.
Module::Pluggable (3pm) - automatically give your module the ability to have ...
Module::Pluggable::Object (3pm) - automatically give your module the ability ...
ok (3pm)             - Alternative to Test::More::use_ok
Perl::PrereqScanner::NotQuiteLite::Pa... (3pm) - (unknown subject)
Pod::Coverage (3pm)  - Checks if the documentation of a module is comprehensive
Pod::Eventual (3pm)  - read a POD document as a series of trivial events
Software::License::None (3pm) - describes a "license" that gives no license f...
Test2::IPC::Driver (3pm) - Base class for Test2 IPC drivers.
Test2::IPC::Driver::Files (3pm) - Temp dir + Files concurrency model.
Test::use::ok (3pm)  - Alternative to Test::More::use_ok


/man
rootr.net - man pages